#ifndef Pins_Arduino_h #define Pins_Arduino_h #include // #ifndef digitalPinToInterrupt // #define digitalPinToInterrupt(p) (((p) < 48) ? (p) : -1) // #endif #define USB_VID 0x303a #define USB_PID 0x8227 #define USB_MANUFACTURER "LILYGO" #define USB_PRODUCT "T-Watch-Ultra" #define DISP_WIDTH 502 #define DISP_HEIGHT 410 // QSPI interface display #define DISP_D0 (38) #define DISP_D1 (39) #define DISP_D2 (42) #define DISP_D3 (45) #define DISP_SCK (40) #define DISP_CS (41) #define DISP_RST (37) #define DISP_TE (6) // Interrupt IO port #define TP_INT (12) #define RTC_INT (1) #define PMU_INT (7) #define NFC_INT (5) #define SENSOR_INT (8) #define NFC_CS (4) // PDM microphone #define MIC_SCK (17) #define MIC_DAT (18) // MAX98357A #define I2S_BCLK (9) #define I2S_WCLK (10) #define I2S_DOUT (11) #define SD_CS (21) // TX, RX pin connected to GPS static const uint8_t TX = 43; static const uint8_t RX = 44; // BHI260,PCF85063,AXP2101,DRV2605L share I2C Bus static const uint8_t SDA = 3; static const uint8_t SCL = 2; // Default sd cs pin static const uint8_t SS = SD_CS; static const uint8_t MOSI = 34; static const uint8_t MISO = 33; static const uint8_t SCK = 35; #define GPS_TX (TX) #define GPS_RX (RX) #define GPS_PPS (13) #define TP_SDA (SDA) #define TP_SCL (SCL) // LoRa and SD card share SPI bus -> variant.h // #define LORA_SCK (SCK) // share spi bus // #define LORA_MISO (MISO) // share spi bus // #define LORA_MOSI (MOSI) // share spi bus // #define LORA_CS (36) // #define LORA_RST (47) // #define LORA_BUSY (48) // #define LORA_IRQ (14) // External expansion chip IO definition #define EXPANDS_DRV_EN (6) #define EXPANDS_DISP_EN (7) #define EXPANDS_TOUCH_RST (8) #define EXPANDS_SD_DET (10) // Peripheral definition exists #define USING_XL9555_EXPANDS #define USING_PCM_AMPLIFIER #define USING_PDM_MICROPHONE #define USING_PMU_MANAGE #define USING_INPUT_DEV_TOUCHPAD #define USING_ST25R3916 #define USING_BHI260_SENSOR #define HAS_SD_CARD_SOCKET #endif /* Pins_Arduino_h */