mirror of
https://github.com/meshtastic/firmware.git
synced 2025-07-31 19:05:44 +00:00
2fb46ce5d5
* [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * Update to 1.0.4 release of RAK12035_SoilMoisture * cleanup * cool * . * .. * little bit of cleanup and recompile/upload/test on RAK WISBLAOCK STACK: RAK19007/RAK4631/RAK12035VB/RAK12500 looks like soil monitor is working correctly, new environmental metrics are comming thru [new protos soil_moisture, soil_temperature] and GPS is working again with the RAK 12500. improvements could be made around the configuration of the monitor. next steps include updating the client(s) to react to, log and display the new proto metrics for soil temp and humidity. * . comments about current limitations and TODOs * trunk update * trying to autoformat.. * fix formatting attempt 2 * .. * ... * ... * . * some corrections and local build success * correction in temp code * grr formatting * cleanup after a few experiments * remove temp code to overwrite values for temp and humidity protos.. next step just update the clients to know about soil_temperature and soil_humidity protos. * update some values in varient for rak wistap * working out trunk formatting.. * wip . corrections to other build variants * . * protobuffs? * protobufs? * Update protobufs ref * Protobufs ref * Trunk * Update RAK12035Sensor.cpp * Fmt * comment changes * dumb mistakes... resolved, actually built and tested.. all good.. * Update src/modules/Telemetry/Sensor/RAK12035Sensor.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/modules/Telemetry/Sensor/RAK12035Sensor.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * . proto submod * proto * proto * merge master * mabe a fix for GPS pin conflict, waiting on a new gps module to try * merge master, attempt to fix gps (RAK12500) pin conflict with RAK12023/12035 * . * . --------- Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
56 lines
2.6 KiB
INI
56 lines
2.6 KiB
INI
; The very slick RAK wireless RAK 4631 / 4630 board - Unified firmware for 5005/19003, with or without OLED RAK 1921
|
|
[env:rak4631]
|
|
extends = nrf52840_base
|
|
board = wiscore_rak4631
|
|
board_check = true
|
|
build_flags = ${nrf52840_base.build_flags} -Ivariants/rak4631 -D RAK_4631
|
|
-DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
|
|
-DEINK_DISPLAY_MODEL=GxEPD2_213_BN
|
|
-DEINK_WIDTH=250
|
|
-DEINK_HEIGHT=122
|
|
-DRADIOLIB_EXCLUDE_SX128X=1
|
|
-DRADIOLIB_EXCLUDE_SX127X=1
|
|
-DRADIOLIB_EXCLUDE_LR11X0=1
|
|
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/rak4631> +<mesh/eth/> +<mesh/api/> +<mqtt/>
|
|
lib_deps =
|
|
${nrf52840_base.lib_deps}
|
|
${networking_base.lib_deps}
|
|
melopero/Melopero RV3028@^1.1.0
|
|
https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
|
|
rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
|
|
beegee-tokyo/RAK12035_SoilMoisture@^1.0.4
|
|
https://github.com/RAKWireless/RAK12034-BMX160/archive/dcead07ffa267d3c906e9ca4a1330ab989e957e2.zip
|
|
|
|
; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
|
|
; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
|
|
;upload_protocol = jlink
|
|
|
|
; Allows programming and debug via the RAK NanoDAP as the default debugger tool for the RAK4631 (it is only $10!)
|
|
; programming time is about the same as the bootloader version.
|
|
; For information on this see the meshtastic developers documentation for "Development on the NRF52"
|
|
[env:rak4631_dbg]
|
|
extends = env:rak4631
|
|
board_level = extra
|
|
|
|
; if the builtin version of openocd has a buggy version of semihosting, so use the external version
|
|
; platform_packages = platformio/tool-openocd@^3.1200.0
|
|
|
|
build_flags =
|
|
${env:rak4631.build_flags}
|
|
-D USE_SEMIHOSTING
|
|
|
|
lib_deps =
|
|
${env:rak4631.lib_deps}
|
|
https://github.com/geeksville/Armduino-Semihosting/archive/35b538fdf208c3530c1434cd099a08e486672ee4.zip
|
|
|
|
; NOTE: the pyocd support for semihosting is buggy. So I switched to using the builtin platformio support for the stlink adapter which worked much better.
|
|
; However the built in openocd version in platformio has buggy support for TCP to semihosting.
|
|
;
|
|
; So I'm now trying the external openocd - but the openocd scripts for nrf52.cfg assume you are using a DAP adapter not an STLINK adapter.
|
|
; In theory I could change those scripts. But for now I'm trying going back to a DAP adapter but with the external openocd.
|
|
|
|
upload_protocol = stlink
|
|
; eventually use platformio/tool-pyocd@^2.3600.0 instad
|
|
;upload_protocol = custom
|
|
;upload_command = pyocd flash -t nrf52840 $UPLOADERFLAGS $SOURCE
|