mirror of
https://github.com/meshtastic/firmware.git
synced 2025-02-01 18:29:56 +00:00
18cf8ca4fa
* Generalise SPI pin names * CS not NSS * trunk fmt * Update variant.h --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
46 lines
1.2 KiB
C
46 lines
1.2 KiB
C
#define LED_PIN 18
|
|
|
|
// Enable bus for external periherals
|
|
#define I2C_SDA SDA
|
|
#define I2C_SCL SCL
|
|
|
|
#define USE_EINK
|
|
/*
|
|
* eink display pins
|
|
*/
|
|
#define PIN_EINK_CS 4
|
|
#define PIN_EINK_BUSY 7
|
|
#define PIN_EINK_DC 5
|
|
#define PIN_EINK_RES 6
|
|
#define PIN_EINK_SCLK 3
|
|
#define PIN_EINK_MOSI 2
|
|
|
|
#define VEXT_ENABLE Vext // active low, powers the oled display and the lora antenna boost
|
|
#define BUTTON_PIN 0
|
|
|
|
#define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
|
|
#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
|
|
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
|
|
#define ADC_MULTIPLIER 4.9
|
|
|
|
#define USE_SX1262
|
|
|
|
#define LORA_DIO0 -1 // a No connect on the SX1262 module
|
|
#define LORA_RESET 12
|
|
#define LORA_DIO1 14 // SX1262 IRQ
|
|
#define LORA_DIO2 13 // SX1262 BUSY
|
|
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
|
|
|
|
#define LORA_SCK 9
|
|
#define LORA_MISO 11
|
|
#define LORA_MOSI 10
|
|
#define LORA_CS 8
|
|
|
|
#define SX126X_CS LORA_CS
|
|
#define SX126X_DIO1 LORA_DIO1
|
|
#define SX126X_BUSY LORA_DIO2
|
|
#define SX126X_RESET LORA_RESET
|
|
|
|
#define SX126X_DIO2_AS_RF_SWITCH
|
|
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|