mirror of
https://github.com/meshtastic/firmware.git
synced 2025-06-08 14:12:05 +00:00
cc66f7c79b
* SD software SPI control * fix notification crash; * allow wake on touch * don't build non-MUI variants * use pwm buzzer * Finalize support for Crowpanel TFT 2.4, 2.8 and 3.5 * add hardware ID for TFT panels * Add stubs for the bigger panels. WIP! * fix braces * elecrow 4.3, 5.0, 7.0 support * completed implementation 4.3, 5.0, 7.0 variants * NodeDB default config & simplified light sleep macros * trunk fmt * remove flags * removed leftovers (note: rtc gpios are only needed for deep sleep; the remove section caused issues with the elecrows) --------- Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> Co-authored-by: Austin <vidplace7@gmail.com>
80 lines
2.0 KiB
C
80 lines
2.0 KiB
C
// ST7789 TFT LCD
|
|
#define ST7789_CS 12
|
|
#define ST7789_RS 38 // DC
|
|
#define ST7789_SDA 13 // MOSI
|
|
#define ST7789_SCK 18
|
|
#define ST7789_RESET -1
|
|
#define ST7789_MISO -1
|
|
#define ST7789_BUSY -1
|
|
#define ST7789_BL 45
|
|
#define ST7789_SPI_HOST SPI3_HOST
|
|
#define TFT_BL 45
|
|
#define SPI_FREQUENCY 40000000
|
|
#define SPI_READ_FREQUENCY 16000000
|
|
#define TFT_HEIGHT 240
|
|
#define TFT_WIDTH 240
|
|
#define TFT_OFFSET_X 0
|
|
#define TFT_OFFSET_Y 0
|
|
#define TFT_OFFSET_ROTATION 2
|
|
#define SCREEN_ROTATE
|
|
#define SCREEN_TRANSITION_FRAMERATE 5 // fps
|
|
|
|
#define HAS_TOUCHSCREEN 1
|
|
#define SCREEN_TOUCH_INT 16
|
|
#define SCREEN_TOUCH_USE_I2C1
|
|
#define TOUCH_I2C_PORT 1
|
|
#define TOUCH_SLAVE_ADDRESS 0x38
|
|
#define WAKE_ON_TOUCH
|
|
|
|
#define USE_POWERSAVE
|
|
#define SLEEP_TIME 180
|
|
|
|
#define I2C_SDA1 39 // Used for capacitive touch
|
|
#define I2C_SCL1 40 // Used for capacitive touch
|
|
|
|
#define HAS_I2S
|
|
#define DAC_I2S_BCK 48
|
|
#define DAC_I2S_WS 15
|
|
#define DAC_I2S_DOUT 46
|
|
#define DAC_I2S_MCLK 0
|
|
|
|
#define HAS_AXP2101
|
|
|
|
#define HAS_RTC 1
|
|
|
|
#define I2C_SDA 10 // For QMC6310 sensors and screens
|
|
#define I2C_SCL 11 // For QMC6310 sensors and screens
|
|
|
|
#define BMA4XX_INT 14 // Interrupt for BMA_423 axis sensor
|
|
|
|
#define HAS_GPS 0
|
|
#undef GPS_RX_PIN
|
|
#undef GPS_TX_PIN
|
|
|
|
#define USE_SX1262
|
|
#define USE_SX1268
|
|
|
|
#define LORA_SCK 3
|
|
#define LORA_MISO 4
|
|
#define LORA_MOSI 1
|
|
#define LORA_CS 5
|
|
|
|
#define LORA_DIO0 -1 // a No connect on the SX1262 module
|
|
#define LORA_RESET 8
|
|
#define LORA_DIO1 9 // SX1262 IRQ
|
|
#define LORA_DIO2 7 // SX1262 BUSY
|
|
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
|
|
|
|
#define SX126X_CS LORA_CS // FIXME - we really should define LORA_CS instead
|
|
#define SX126X_DIO1 LORA_DIO1
|
|
#define SX126X_BUSY LORA_DIO2
|
|
#define SX126X_RESET LORA_RESET
|
|
// Not really an E22 but TTGO seems to be trying to clone that
|
|
#define SX126X_DIO2_AS_RF_SWITCH
|
|
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
|
// Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for
|
|
// the sx1262interface code)
|
|
|
|
#define USE_VIRTUAL_KEYBOARD 1
|
|
#define DISPLAY_CLOCK_FRAME 1
|