mirror of
https://github.com/meshtastic/firmware.git
synced 2025-09-24 18:23:08 +00:00
cea9e1238b
Some checks failed
CI / setup (check) (push) Has been cancelled
CI / setup (esp32) (push) Has been cancelled
CI / setup (esp32c3) (push) Has been cancelled
CI / setup (esp32c6) (push) Has been cancelled
CI / setup (esp32s3) (push) Has been cancelled
CI / setup (nrf52840) (push) Has been cancelled
CI / setup (rp2040) (push) Has been cancelled
CI / setup (rp2350) (push) Has been cancelled
CI / setup (stm32) (push) Has been cancelled
CI / version (push) Has been cancelled
CI / build-debian-src (push) Has been cancelled
CI / package-pio-deps-native-tft (push) Has been cancelled
CI / test-native (push) Has been cancelled
CI / docker-deb-amd64 (push) Has been cancelled
CI / docker-deb-amd64-tft (push) Has been cancelled
CI / docker-alp-amd64 (push) Has been cancelled
CI / docker-alp-amd64-tft (push) Has been cancelled
CI / docker-deb-arm64 (push) Has been cancelled
CI / docker-deb-armv7 (push) Has been cancelled
CI / check (push) Has been cancelled
CI / build-esp32 (push) Has been cancelled
CI / build-esp32s3 (push) Has been cancelled
CI / build-esp32c3 (push) Has been cancelled
CI / build-esp32c6 (push) Has been cancelled
CI / build-nrf52840 (push) Has been cancelled
CI / build-rp2040 (push) Has been cancelled
CI / build-rp2350 (push) Has been cancelled
CI / build-stm32 (push) Has been cancelled
CI / gather-artifacts (esp32) (push) Has been cancelled
CI / gather-artifacts (esp32c3) (push) Has been cancelled
CI / gather-artifacts (esp32c6) (push) Has been cancelled
CI / gather-artifacts (esp32s3) (push) Has been cancelled
CI / gather-artifacts (nrf52840) (push) Has been cancelled
CI / gather-artifacts (rp2040) (push) Has been cancelled
CI / gather-artifacts (rp2350) (push) Has been cancelled
CI / gather-artifacts (stm32) (push) Has been cancelled
CI / release-artifacts (push) Has been cancelled
CI / release-firmware (esp32) (push) Has been cancelled
CI / release-firmware (esp32c3) (push) Has been cancelled
CI / release-firmware (esp32c6) (push) Has been cancelled
CI / release-firmware (esp32s3) (push) Has been cancelled
CI / release-firmware (nrf52840) (push) Has been cancelled
CI / release-firmware (rp2040) (push) Has been cancelled
CI / release-firmware (rp2350) (push) Has been cancelled
CI / release-firmware (stm32) (push) Has been cancelled
CI / publish-firmware (push) Has been cancelled
* add heltec_v4 board. * Update variants/esp32s3/heltec_v4/platformio.ini Co-authored-by: Austin <vidplace7@gmail.com> * Limit the maximum output power. * Trunk fixes Fixes formatting to match meshtastic trunk linter. * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Austin <vidplace7@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
58 lines
1.9 KiB
C
58 lines
1.9 KiB
C
#define LED_PIN 35
|
|
|
|
#define USE_SSD1306 // Heltec_v4 has an SSD1315 display (compatible with SSD1306 driver)
|
|
|
|
#define RESET_OLED 21
|
|
#define I2C_SDA 17 // I2C pins for this board
|
|
#define I2C_SCL 18
|
|
|
|
#define VEXT_ENABLE 36 // active low, powers the oled display and the lora antenna boost
|
|
#define BUTTON_PIN 0
|
|
|
|
#define ADC_CTRL 37
|
|
#define ADC_CTRL_ENABLED HIGH
|
|
#define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
|
|
#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
|
|
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
|
|
#define ADC_MULTIPLIER 4.9 * 1.045
|
|
|
|
#define USE_SX1262
|
|
|
|
#define LORA_DIO0 -1 // a No connect on the SX1262 module
|
|
#define LORA_RESET 12
|
|
#define LORA_DIO1 14 // SX1262 IRQ
|
|
#define LORA_DIO2 13 // SX1262 BUSY
|
|
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TCXO is enabled
|
|
|
|
#define LORA_SCK 9
|
|
#define LORA_MISO 11
|
|
#define LORA_MOSI 10
|
|
#define LORA_CS 8
|
|
|
|
#define SX126X_CS LORA_CS
|
|
#define SX126X_DIO1 LORA_DIO1
|
|
#define SX126X_BUSY LORA_DIO2
|
|
#define SX126X_RESET LORA_RESET
|
|
|
|
#define SX126X_DIO2_AS_RF_SWITCH
|
|
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
|
|
|
#define LORA_PA_POWER 7 // power en
|
|
#define LORA_PA_EN 2
|
|
#define LORA_PA_TX_EN 46 // enable tx
|
|
|
|
/*
|
|
* GPS pins
|
|
*/
|
|
#define GPS_L76K
|
|
#define PIN_GPS_RESET (42) // An output to reset L76K GPS. As per datasheet, low for > 100ms will reset the L76K
|
|
#define GPS_RESET_MODE LOW
|
|
#define PIN_GPS_EN (34)
|
|
#define GPS_EN_ACTIVE LOW
|
|
#define PERIPHERAL_WARMUP_MS 1000 // Make sure I2C QuickLink has stable power before continuing
|
|
#define PIN_GPS_STANDBY (40) // An output to wake GPS, low means allow sleep, high means force wake
|
|
#define PIN_GPS_PPS (41)
|
|
// Seems to be missing on this new board
|
|
#define GPS_TX_PIN (38) // This is for bits going TOWARDS the CPU
|
|
#define GPS_RX_PIN (39) // This is for bits going TOWARDS the GPS
|
|
#define GPS_THREAD_INTERVAL 50 |