mirror of
https://github.com/meshtastic/firmware.git
synced 2025-06-10 15:12:06 +00:00
37e6769b12
Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann
57 lines
2.7 KiB
INI
57 lines
2.7 KiB
INI
; The very slick RAK wireless RAK 4631 / 4630 board - Unified firmware for 5005/19003, with or without OLED RAK 1921
|
|
[env:rak4631]
|
|
extends = nrf52840_base
|
|
board = wiscore_rak4631
|
|
board_check = true
|
|
build_flags = ${nrf52840_base.build_flags} -Ivariants/rak4631 -D RAK_4631
|
|
-L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
|
|
-DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
|
|
-DEINK_DISPLAY_MODEL=GxEPD2_213_BN
|
|
-DEINK_WIDTH=250
|
|
-DEINK_HEIGHT=122
|
|
-DRADIOLIB_EXCLUDE_SX128X=1
|
|
-DRADIOLIB_EXCLUDE_SX127X=1
|
|
-DRADIOLIB_EXCLUDE_LR11X0=1
|
|
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/rak4631> +<mesh/eth/> +<mesh/api/> +<mqtt/>
|
|
lib_deps =
|
|
${nrf52840_base.lib_deps}
|
|
${networking_base.lib_deps}
|
|
melopero/Melopero RV3028@^1.1.0
|
|
https://github.com/RAKWireless/RAK13800-W5100S.git#1.0.2
|
|
rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
|
|
https://github.com/RAKWireless/RAK12034-BMX160.git#dcead07ffa267d3c906e9ca4a1330ab989e957e2
|
|
beegee-tokyo/RAK12035_SoilMoisture@^1.0.3
|
|
|
|
; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
|
|
; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
|
|
;upload_protocol = jlink
|
|
|
|
; Allows programming and debug via the RAK NanoDAP as the default debugger tool for the RAK4631 (it is only $10!)
|
|
; programming time is about the same as the bootloader version.
|
|
; For information on this see the meshtastic developers documentation for "Development on the NRF52"
|
|
[env:rak4631_dbg]
|
|
extends = env:rak4631
|
|
board_level = extra
|
|
|
|
; if the builtin version of openocd has a buggy version of semihosting, so use the external version
|
|
; platform_packages = platformio/tool-openocd@^3.1200.0
|
|
|
|
build_flags =
|
|
${env:rak4631.build_flags}
|
|
-D USE_SEMIHOSTING
|
|
|
|
lib_deps =
|
|
${env:rak4631.lib_deps}
|
|
https://github.com/geeksville/Armduino-Semihosting.git#35b538fdf208c3530c1434cd099a08e486672ee4
|
|
|
|
; NOTE: the pyocd support for semihosting is buggy. So I switched to using the builtin platformio support for the stlink adapter which worked much better.
|
|
; However the built in openocd version in platformio has buggy support for TCP to semihosting.
|
|
;
|
|
; So I'm now trying the external openocd - but the openocd scripts for nrf52.cfg assume you are using a DAP adapter not an STLINK adapter.
|
|
; In theory I could change those scripts. But for now I'm trying going back to a DAP adapter but with the external openocd.
|
|
|
|
upload_protocol = stlink
|
|
; eventually use platformio/tool-pyocd@^2.3600.0 instad
|
|
;upload_protocol = custom
|
|
;upload_command = pyocd flash -t nrf52840 $UPLOADERFLAGS $SOURCE
|