firmware/arch/esp32/esp32.ini
Jonathan Bennett 473ef1bc03
Step one of Linux Sensor support (#6673)
* First addition of __has_include for sensor support

* Add __has_include blocks for sensors

* Put BMP and BME back in the right sensors

* Make TelemetrySensor::setup() a pure virtual finction

* Split environmental_base to environmental_extra, to compile the working sensor libs for Native

* Remove hard-coded checks for ARCH_PORTDUINO

* Un-clobber bmx160

* Move BusIO to environmental_extra due to Armv7 compile error

* Move to forked BusIO for the moment

* Enable HAS_SENSOR for Portduino

* Move back to Adafruit BusIO after patch
2025-04-28 18:35:13 -05:00

79 lines
3.1 KiB
INI

; Common settings for ESP targes, mixin with extends = esp32_base
[esp32_base]
extends = arduino_base
custom_esp32_kind = esp32
platform =
# renovate: datasource=custom.pio depName=platformio/espressif32 packageName=platformio/platform/espressif32
platformio/espressif32@6.10.0
build_src_filter =
${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
upload_speed = 921600
debug_init_break = tbreak setup
monitor_filters = esp32_exception_decoder
board_build.filesystem = littlefs
# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
build_unflags = -fno-lto
build_flags =
${arduino_base.build_flags}
-flto
-Wall
-Wextra
-Isrc/platform/esp32
-std=c++11
-DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG
-DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
-DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
-DAXP_DEBUG_PORT=Serial
-DCONFIG_BT_NIMBLE_ENABLED
-DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
-DCONFIG_BT_NIMBLE_MAX_CCCDS=20
-DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192
-DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
-DSERIAL_BUFFER_SIZE=4096
-DLIBPAX_ARDUINO
-DLIBPAX_WIFI
-DLIBPAX_BLE
-DHAS_UDP_MULTICAST=1
;-DDEBUG_HEAP
lib_deps =
${arduino_base.lib_deps}
${networking_base.lib_deps}
${environmental_base.lib_deps}
${environmental_extra.lib_deps}
${radiolib_base.lib_deps}
# renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
https://github.com/meshtastic/esp32_https_server/archive/896f1771ceb5979987a0b41028bf1b4e7aad419b.zip
# renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
h2zero/NimBLE-Arduino@^1.4.3
# renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
# renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
lewisxhe/XPowersLib@^0.2.7
# renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
# renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
rweather/Crypto@^0.4.0
lib_ignore =
segger_rtt
ESP32 BLE Arduino
; leave this commented out to avoid breaking Windows
;upload_port = /dev/ttyUSB0
;monitor_port = /dev/ttyUSB0
; Please don't delete these lines. JM uses them.
;upload_port = /dev/cu.SLAB_USBtoUART
;monitor_port = /dev/cu.SLAB_USBtoUART
; customize the partition table
; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
board_build.partitions = partition-table.csv