mirror of
https://github.com/meshtastic/firmware.git
synced 2025-02-08 13:41:28 +00:00
4b4c1669a9
* Fix I2C pindefs * Initial driver testing for HT-VME290 * E-Ink full refresh after canned message pop up * Tidy variant folders * Clean ESP32 cpuDeepSleep method Merge sections, and remove the random assortment of gpio holds left behind. * Enable 32kHz in variant.h * Orient E290 with LoRa antenna facing up * Revert "Clean ESP32 cpuDeepSleep method" This reverts commit cb8ee508ec2d6bc27a8e228021fd1efbd034c4a0. * Reduce deep-sleep current for VME213 (non-intrusive) Originally I made an attempt at tidying up the cpuDeepSleep method, but have reverted that. New commit makes only the changes needed to support VME213. Don't really want the headache of breaking sleep for other variants, especially when this PR is just about implementing new boards. * Update lib_deps; remove board_level extra
52 lines
1.1 KiB
C
52 lines
1.1 KiB
C
#define BUTTON_PIN 0
|
|
|
|
// I2C
|
|
#define I2C_SDA SDA
|
|
#define I2C_SCL SCL
|
|
|
|
// Display (E-Ink)
|
|
#define USE_EINK
|
|
#define PIN_EINK_CS 3
|
|
#define PIN_EINK_BUSY 6
|
|
#define PIN_EINK_DC 4
|
|
#define PIN_EINK_RES 5
|
|
#define PIN_EINK_SCLK 2
|
|
#define PIN_EINK_MOSI 1
|
|
|
|
// SPI
|
|
#define SPI_INTERFACES_COUNT 2
|
|
#define PIN_SPI_MISO 11
|
|
#define PIN_SPI_MOSI 10
|
|
#define PIN_SPI_SCK 9
|
|
|
|
// Power
|
|
#define VEXT_ENABLE 18 // Powers the E-Ink display only
|
|
#define VEXT_ON_VALUE HIGH
|
|
#define ADC_CTRL 46
|
|
#define ADC_CTRL_ENABLED HIGH
|
|
#define BATTERY_PIN 7
|
|
#define ADC_CHANNEL ADC1_GPIO7_CHANNEL
|
|
#define ADC_MULTIPLIER 4.9 * 1.03
|
|
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5
|
|
#define HAS_32768HZ
|
|
|
|
// LoRa
|
|
#define USE_SX1262
|
|
|
|
#define LORA_DIO0 RADIOLIB_NC // a No connect on the SX1262 module
|
|
#define LORA_RESET 12
|
|
#define LORA_DIO1 14 // SX1262 IRQ
|
|
#define LORA_DIO2 13 // SX1262 BUSY
|
|
|
|
#define LORA_SCK 9
|
|
#define LORA_MISO 11
|
|
#define LORA_MOSI 10
|
|
#define LORA_CS 8
|
|
|
|
#define SX126X_CS LORA_CS
|
|
#define SX126X_DIO1 LORA_DIO1
|
|
#define SX126X_BUSY LORA_DIO2
|
|
#define SX126X_RESET LORA_RESET
|
|
|
|
#define SX126X_DIO2_AS_RF_SWITCH
|
|
#define SX126X_DIO3_TCXO_VOLTAGE 1.8 |