firmware/src/graphics/draw/DebugRenderer.cpp
Jonathan Bennett 4feaec651f
Unify the native display config between legacy display and MUI (#6838)
* Add missed include

* Another Warning fix

* Add another HAS_SCREEN

* Namespace fixes

* Removed depricated destination types and re-factored destination screen

* Get rid of Arduino Strings

* Clean up after Copilot

* SixthLine Def, Screen Rename

Added Sixth Line Definition Screen Rename, and Automatic Line Adjustment

* Consistency is hard - fixed "Sixth"

* System Frame Updates

Adjusted line construction to ensure we fit maximum content per screen.

* Fix up notifications

* Add a couple more ifdef HAS_SCREEN lines

* Add screen->isOverlayBannerShowing()

* Don't forget the invert!

* Adjust Nodelist Center Divider

Adjust Nodelist Center Divider

* Fix variable casting

* Fix entryText variable as empty before update to fix validation

* Altitude is int32_t

* Update PowerTelemetry to have correct data type

* Fix cppcheck warnings (#6945)

* Fix cppcheck warnings

* Adjust logic in Power.cpp for power sensor

---------

Co-authored-by: Jason P <applewiz@mac.com>

* More pixel wrangling so things line up NodeList edition

* Adjust NodeList alignments and plumb some background padding for a possible title fix

* Better alignment for banner notifications

* Move title into drawCommonHeader; initial screen tested

* Fonts make spacing items difficult

* Improved beeping booping and other buzzer based feedback (#6947)

* Improved beeping booping and other buzzer based feedback

* audible button feedback (#6949)

* Refactor

---------

Co-authored-by: todd-herbert <herbert.todd@gmail.com>

* Sandpapered the corners of the notification popup

* Finalize drawCommonHeader migration

* Update Title of Favorite Node Screens

* Update node metric alignment on LoRa screen

* Update the border for popups to separate it from background

* Update PaxcounterModule.cpp with CommonHeader

* Update WiFi screen with CommonHeader and related data reflow

* It was not, in fact, pointing up

* Fix build on wismeshtap

* T-deck trackball debounce

* Fix uptime on Device Focused page to actually detail

* Update Sys screen for new uptime, add label to Freq/Chan on LoRa

* Don't display DOP any longer, make Uptime consistent

* Revert Uptime change on Favorites, Apply to Device Focused

* Label the satelite number to avoid confusion

* Boop boop boop boop

* Correct GPS positioning and string consistency across strings for GPS

* Fix GPS text alignment

* Enable canned messages by default

* Don't wake screen on new nodes

* Cannedmessage list emote support added

* Fn+e emote picker for freetext screen

* Actually block CannedInput actions while display is shown

* Add selection menu to bannerOverlay

* Off by one

* Move to unified text layouts and spacing

* Still my Fav without an "e"

* Fully remove EVENT_NODEDB_UPDATED

* Simply LoRa screen

* Make some char pointers const to fix compilation on native targets

* Update drawCompassNorth to include radius

* Fix warning

* button thread cleanup

* Pull OneButton handling from PowerFSM and add MUI switch (#6973)

* Trunk

* Onebutton Menu Support

* Add temporary clock icon

* Add gps location to fsi

* Banner message state reset

* Cast to char to satisfy compiler

* Better fast handling of input during banner

* Fix warning

* Derp

* oops

* Update ref

* Wire buzzer_mode

* remove legacy string->print()

* Only init screen if one found

* Unsigned Char

* More buttonThread cleaning

* screen.cpp button handling cleanup

* The Great Event Rename of 2025

* Fix the Radiomaster

* Missed trackball type change

* Remove unused function

* Make ButtonThread an InputBroker

* Coffee hadn't kicked in yet

* Add clock icon for Navigation Bar

* Restore clock screen definition code - whoops

* ExternalNotifications now observe inputBroker

* Clock rework (#6992)

* Move Clock bits into ClockRenderer space

* Rework clock into all device navigation

* T-Watch Actually Builds Different

* Compile fix

---------

Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>

* Add AM/PM to Digital Clock

* Flip Seconds and AM/PM on Clock Display

* Tik-tok pixels are hard

* Fix builds on Thinknode M1

* Check for GPS and don't crash

* Don't endif til the end

* Rework the OneButton thread to be much less of a mess. (#6997)

* Rework the OneButton thread to be much less of a mess. And break lots of targets temporarily

* Update src/input/ButtonThread.h

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* fix GPS toggle

* Send the shutdown event, not just the kbchar

* Honor the back button in a notificaiton popup

* Draw the right size box for popup with options

* Try to un-break all the things

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* 24-hour Clock Should have leading zero, but not 12-hour

* Fixup some compile errors

* Add intRoutine to ButtonThread init, to get more responsive user button back

* Add Timezone picker

* Fix Warning

* Optionally set the initial selection for the chooser popup

* Make back buttons work in canned messages

* Drop the wrapper classes

* LonPressTime now configurable

* Clock Frame can not longer be blank; just add valid time

* Back buttons everywhere!

* Key Verification confirm banner

* Make Elecrow M* top button a back button

* Add settings saves

* EInk responsiveness fixes

* Linux Input Fixes

* Add Native Trackball/Joystick support, and move UserButton to Input

* No Flight Stick Mode

* Send input event

* Add Channel Utilization to Device Focused frame

* Don't shift screens when we draw new ones

* Add showOverlayBanner arguments to no-op

* trunk

* Default Native trackball to NC

* Fix crash in simulator mode

* Add longLong button press

* Get the args right

* Adjust Bluetooth Pairing Screen to account for bottom navigation.

* Trackball everywhere, and unPhone buttons

* Remap visionmaster secondary button to TB_UP

* Kill ScanAndSelect

* trunk

* No longer need the canned messages input filter

* All Canned All the time

* Fix stm32 compile error regarding inputBroker

* Unify tft lineheights (#7033)

* Create variable line heights based upon SCREEN_HEIGHT

* Refactor textPositions into method -> getTextPositions

* Update SharedUIDisplay.h

---------

Co-authored-by: Jason P <applewiz@mac.com>

* Adjust top distance for larger displays

* Adjust icon sizes for larger displays

* Fix Paxcounter compile errors after code updates

* Pixel wrangling to make larger screens fit better

* Alert frame has precedence over banner -- for now

* Unify on ALT_BUTTON

* Align AM/PM to the digit, not the segment on larger displays

* Move some global pin defines into configuration.h

* Scaffolding for BMM150 9-axis gyro

* Alt button behavior

* Don't add the blank GPS frames without HAS_GPS

* EVENT_NODEDB_UPDATED has been retired

* Clean out LOG_WARN messages from debugging

* Add dismiss message function

* Minor buttonThread cleanup

* Add BMM150 support

* Clean up last warning from dev

* Simplify bmm150 init return logic

* Add option to reply to messages

* Add minimal menu upon selecting home screen

* Move Messages to slot 2, rename GPS to Position, move variables nearer functional usage in Screen.cpp

* Properly dismiss message

* T-Deck Trackball press is not user button

* Add select on favorite frame to launch cannedMessage DM

* Minor wording change

* Less capital letters

* Fix empty message check, time isn't reliable

* drop dead code

* Make UIRenderer a static class instead of namespace

* Fix the select on favorite

* Check if message is empty early and then 'return'

* Add kb_found, and show the option to launch freetype if appropriate

* Ignore impossible touchscreen touches

* Auto scroll fix

* Move linebreak after "from" for banners to maximize screen usage.

* Center "No messages to show" on Message frame

* Start consolidating buzzer behavior

* Fixed signed / unsigned warning

* Cast second parameter of max() to make some targets happy

* Cast kbchar to (char) to make arduino string happy

* Shorten the notice of "No messages"

* Add buzzer mode chooser

* Add regionPicker to Lora icon

* Reduce line spacing and reorder Position screen to resolve overlapping issues

* Update message titles, fix GPS icons, add Back options

* Leftover boops

* Remove chirp

* Make the region selection dismissable when a region is already set

* Add read-aloud functionality on messages w/ esp8266sam

* "Last Heard" is a better label

* tweak the beep

* 5 options

* properly tear down freetext upon cancel

* de-convelute canned messages just a bit

* Correct height of Mail icon in navigation bar

* Remove unused warning

* Consolidate time methods into TimeFormatters

* Oops

* Change LoRa Picker Cancel to Back

* Tweak selection characters on Banner

* Message render not scrolling on 5th line

* More fixes for message scrolling

* Remove the safety next on text overflow - we found that root cause

* Add pin definitions to fix compilation for obscure target

* Don't let the touchscreen send unitialized kbchar values

* Make virtual KB just a bit quicker

* No more double tap, swipe!

* Left is left, and Right is right

* Update horizontal lightning bolt design

* Move from solid to dashed separator for Message Frame

* Single emote feature fix

* Manually sort overlapping elements for now

* Freetext and clearer choices

* Fix ESP32 InkHUD builds on the unify-tft branch (#7087)

* Remove BaseUI branding

* Capitalization is fun

* Revert Meshtastic Boot Frame Changes

* Add ANZ_433 LoRa region to picker

* Update settings.json

---------

Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
2025-06-21 06:36:04 -05:00

634 lines
24 KiB
C++
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

#include "configuration.h"
#if HAS_SCREEN
#include "../Screen.h"
#include "DebugRenderer.h"
#include "FSCommon.h"
#include "NodeDB.h"
#include "Throttle.h"
#include "UIRenderer.h"
#include "airtime.h"
#include "gps/RTC.h"
#include "graphics/ScreenFonts.h"
#include "graphics/SharedUIDisplay.h"
#include "graphics/images.h"
#include "main.h"
#include "mesh/Channels.h"
#include "mesh/generated/meshtastic/deviceonly.pb.h"
#include "sleep.h"
#if HAS_WIFI && !defined(ARCH_PORTDUINO)
#include "mesh/wifi/WiFiAPClient.h"
#include <WiFi.h>
#ifdef ARCH_ESP32
#include "mesh/wifi/WiFiAPClient.h"
#endif
#endif
#ifdef ARCH_ESP32
#include "modules/StoreForwardModule.h"
#endif
#include <DisplayFormatters.h>
#include <RadioLibInterface.h>
#include <target_specific.h>
using namespace meshtastic;
// External variables
extern graphics::Screen *screen;
extern PowerStatus *powerStatus;
extern NodeStatus *nodeStatus;
extern GPSStatus *gpsStatus;
extern Channels channels;
extern AirTime *airTime;
// External functions from Screen.cpp
extern bool heartbeat;
#ifdef ARCH_ESP32
extern StoreForwardModule *storeForwardModule;
#endif
namespace graphics
{
namespace DebugRenderer
{
void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
{
display->setFont(FONT_SMALL);
// The coordinates define the left starting point of the text
display->setTextAlignment(TEXT_ALIGN_LEFT);
if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_INVERTED) {
display->fillRect(0 + x, 0 + y, x + display->getWidth(), y + FONT_HEIGHT_SMALL);
display->setColor(BLACK);
}
char channelStr[20];
snprintf(channelStr, sizeof(channelStr), "#%s", channels.getName(channels.getPrimaryIndex()));
// Display power status
if (powerStatus->getHasBattery()) {
if (config.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT) {
UIRenderer::drawBattery(display, x, y + 2, imgBattery, powerStatus);
} else {
UIRenderer::drawBattery(display, x + 1, y + 3, imgBattery, powerStatus);
}
} else if (powerStatus->knowsUSB()) {
if (config.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT) {
display->drawFastImage(x, y + 2, 16, 8, powerStatus->getHasUSB() ? imgUSB : imgPower);
} else {
display->drawFastImage(x + 1, y + 3, 16, 8, powerStatus->getHasUSB() ? imgUSB : imgPower);
}
}
// Display nodes status
if (config.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT) {
UIRenderer::drawNodes(display, x + (SCREEN_WIDTH * 0.25), y + 2, nodeStatus);
} else {
UIRenderer::drawNodes(display, x + (SCREEN_WIDTH * 0.25), y + 3, nodeStatus);
}
#if HAS_GPS
// Display GPS status
if (config.position.gps_mode != meshtastic_Config_PositionConfig_GpsMode_ENABLED) {
UIRenderer::drawGpsPowerStatus(display, x, y + 2, gpsStatus);
} else {
if (config.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT) {
UIRenderer::drawGps(display, x + (SCREEN_WIDTH * 0.63), y + 2, gpsStatus);
} else {
UIRenderer::drawGps(display, x + (SCREEN_WIDTH * 0.63), y + 3, gpsStatus);
}
}
#endif
display->setColor(WHITE);
// Draw the channel name
display->drawString(x, y + FONT_HEIGHT_SMALL, channelStr);
// Draw our hardware ID to assist with bluetooth pairing. Either prefix with Info or S&F Logo
if (moduleConfig.store_forward.enabled) {
#ifdef ARCH_ESP32
if (!Throttle::isWithinTimespanMs(storeForwardModule->lastHeartbeat,
(storeForwardModule->heartbeatInterval * 1200))) { // no heartbeat, overlap a bit
#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || \
defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || ARCH_PORTDUINO) && \
!defined(DISPLAY_FORCE_SMALL_FONTS)
display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12,
8, imgQuestionL1);
display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 11 + FONT_HEIGHT_SMALL, 12,
8, imgQuestionL2);
#else
display->drawFastImage(x + SCREEN_WIDTH - 10 - display->getStringWidth(screen->ourId), y + 2 + FONT_HEIGHT_SMALL, 8,
8, imgQuestion);
#endif
} else {
#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || \
defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS)) && \
!defined(DISPLAY_FORCE_SMALL_FONTS)
display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 16,
8, imgSFL1);
display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(screen->ourId), y + 11 + FONT_HEIGHT_SMALL, 16,
8, imgSFL2);
#else
display->drawFastImage(x + SCREEN_WIDTH - 13 - display->getStringWidth(screen->ourId), y + 2 + FONT_HEIGHT_SMALL, 11,
8, imgSF);
#endif
}
#endif
} else {
// TODO: Raspberry Pi supports more than just the one screen size
#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || \
defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || ARCH_PORTDUINO) && \
!defined(DISPLAY_FORCE_SMALL_FONTS)
display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
imgInfoL1);
display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 11 + FONT_HEIGHT_SMALL, 12, 8,
imgInfoL2);
#else
display->drawFastImage(x + SCREEN_WIDTH - 10 - display->getStringWidth(screen->ourId), y + 2 + FONT_HEIGHT_SMALL, 8, 8,
imgInfo);
#endif
}
display->drawString(x + SCREEN_WIDTH - display->getStringWidth(screen->ourId), y + FONT_HEIGHT_SMALL, screen->ourId);
// Draw any log messages
display->drawLogBuffer(x, y + (FONT_HEIGHT_SMALL * 2));
/* Display a heartbeat pixel that blinks every time the frame is redrawn */
#ifdef SHOW_REDRAWS
if (heartbeat)
display->setPixel(0, 0);
heartbeat = !heartbeat;
#endif
}
// ****************************
// * WiFi Screen *
// ****************************
void drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
{
#if HAS_WIFI && !defined(ARCH_PORTDUINO)
display->clear();
display->setTextAlignment(TEXT_ALIGN_LEFT);
display->setFont(FONT_SMALL);
int line = 1;
// === Set Title
const char *titleStr = "WiFi";
// === Header ===
graphics::drawCommonHeader(display, x, y, titleStr);
const char *wifiName = config.network.wifi_ssid;
if (WiFi.status() != WL_CONNECTED) {
display->drawString(x, getTextPositions(display)[line++], "WiFi: Not Connected");
} else {
display->drawString(x, getTextPositions(display)[line++], "WiFi: Connected");
char rssiStr[32];
snprintf(rssiStr, sizeof(rssiStr), "RSSI: %d", WiFi.RSSI());
display->drawString(x, getTextPositions(display)[line++], rssiStr);
}
/*
- WL_CONNECTED: assigned when connected to a WiFi network;
- WL_NO_SSID_AVAIL: assigned when no SSID are available;
- WL_CONNECT_FAILED: assigned when the connection fails for all the attempts;
- WL_CONNECTION_LOST: assigned when the connection is lost;
- WL_DISCONNECTED: assigned when disconnected from a network;
- WL_IDLE_STATUS: it is a temporary status assigned when WiFi.begin() is called and remains active until the number of
attempts expires (resulting in WL_CONNECT_FAILED) or a connection is established (resulting in WL_CONNECTED);
- WL_SCAN_COMPLETED: assigned when the scan networks is completed;
- WL_NO_SHIELD: assigned when no WiFi shield is present;
*/
if (WiFi.status() == WL_CONNECTED) {
char ipStr[64];
snprintf(ipStr, sizeof(ipStr), "IP: %s", WiFi.localIP().toString().c_str());
display->drawString(x, getTextPositions(display)[line++], ipStr);
} else if (WiFi.status() == WL_NO_SSID_AVAIL) {
display->drawString(x, getTextPositions(display)[line++], "SSID Not Found");
} else if (WiFi.status() == WL_CONNECTION_LOST) {
display->drawString(x, getTextPositions(display)[line++], "Connection Lost");
} else if (WiFi.status() == WL_IDLE_STATUS) {
display->drawString(x, getTextPositions(display)[line++], "Idle ... Reconnecting");
} else if (WiFi.status() == WL_CONNECT_FAILED) {
display->drawString(x, getTextPositions(display)[line++], "Connection Failed");
}
#ifdef ARCH_ESP32
else {
// Codes:
// https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-guides/wifi.html#wi-fi-reason-code
display->drawString(x, getTextPositions(display)[line++],
WiFi.disconnectReasonName(static_cast<wifi_err_reason_t>(getWifiDisconnectReason())));
}
#else
else {
char statusStr[32];
snprintf(statusStr, sizeof(statusStr), "Unknown status: %d", WiFi.status());
display->drawString(x, getTextPositions(display)[line++], statusStr);
}
#endif
char ssidStr[64];
snprintf(ssidStr, sizeof(ssidStr), "SSID: %s", wifiName);
display->drawString(x, getTextPositions(display)[line++], ssidStr);
display->drawString(x, getTextPositions(display)[line++], "URL: http://meshtastic.local");
/* Display a heartbeat pixel that blinks every time the frame is redrawn */
#ifdef SHOW_REDRAWS
if (heartbeat)
display->setPixel(0, 0);
heartbeat = !heartbeat;
#endif
#endif
}
void drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
{
display->setFont(FONT_SMALL);
// The coordinates define the left starting point of the text
display->setTextAlignment(TEXT_ALIGN_LEFT);
if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_INVERTED) {
display->fillRect(0 + x, 0 + y, x + display->getWidth(), y + FONT_HEIGHT_SMALL);
display->setColor(BLACK);
}
char batStr[20];
if (powerStatus->getHasBattery()) {
int batV = powerStatus->getBatteryVoltageMv() / 1000;
int batCv = (powerStatus->getBatteryVoltageMv() % 1000) / 10;
snprintf(batStr, sizeof(batStr), "B %01d.%02dV %3d%% %c%c", batV, batCv, powerStatus->getBatteryChargePercent(),
powerStatus->getIsCharging() ? '+' : ' ', powerStatus->getHasUSB() ? 'U' : ' ');
// Line 1
display->drawString(x, y, batStr);
if (config.display.heading_bold)
display->drawString(x + 1, y, batStr);
} else {
// Line 1
display->drawString(x, y, "USB");
if (config.display.heading_bold)
display->drawString(x + 1, y, "USB");
}
// auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, true);
// display->drawString(x + SCREEN_WIDTH - display->getStringWidth(mode), y, mode);
// if (config.display.heading_bold)
// display->drawString(x + SCREEN_WIDTH - display->getStringWidth(mode) - 1, y, mode);
uint32_t currentMillis = millis();
uint32_t seconds = currentMillis / 1000;
uint32_t minutes = seconds / 60;
uint32_t hours = minutes / 60;
uint32_t days = hours / 24;
// currentMillis %= 1000;
// seconds %= 60;
// minutes %= 60;
// hours %= 24;
// Show uptime as days, hours, minutes OR seconds
std::string uptime = UIRenderer::drawTimeDelta(days, hours, minutes, seconds);
// Line 1 (Still)
display->drawString(x + SCREEN_WIDTH - display->getStringWidth(uptime.c_str()), y, uptime.c_str());
if (config.display.heading_bold)
display->drawString(x - 1 + SCREEN_WIDTH - display->getStringWidth(uptime.c_str()), y, uptime.c_str());
display->setColor(WHITE);
// Setup string to assemble analogClock string
std::string analogClock = "";
uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice, true); // Display local timezone
if (rtc_sec > 0) {
long hms = rtc_sec % SEC_PER_DAY;
// hms += tz.tz_dsttime * SEC_PER_HOUR;
// hms -= tz.tz_minuteswest * SEC_PER_MIN;
// mod `hms` to ensure in positive range of [0...SEC_PER_DAY)
hms = (hms + SEC_PER_DAY) % SEC_PER_DAY;
// Tear apart hms into h:m:s
int hour = hms / SEC_PER_HOUR;
int min = (hms % SEC_PER_HOUR) / SEC_PER_MIN;
int sec = (hms % SEC_PER_HOUR) % SEC_PER_MIN; // or hms % SEC_PER_MIN
char timebuf[12];
if (config.display.use_12h_clock) {
std::string meridiem = "am";
if (hour >= 12) {
if (hour > 12)
hour -= 12;
meridiem = "pm";
}
if (hour == 00) {
hour = 12;
}
snprintf(timebuf, sizeof(timebuf), "%d:%02d:%02d%s", hour, min, sec, meridiem.c_str());
} else {
snprintf(timebuf, sizeof(timebuf), "%02d:%02d:%02d", hour, min, sec);
}
analogClock += timebuf;
}
// Line 2
display->drawString(x, y + FONT_HEIGHT_SMALL * 1, analogClock.c_str());
// Display Channel Utilization
char chUtil[13];
snprintf(chUtil, sizeof(chUtil), "ChUtil %2.0f%%", airTime->channelUtilizationPercent());
display->drawString(x + SCREEN_WIDTH - display->getStringWidth(chUtil), y + FONT_HEIGHT_SMALL * 1, chUtil);
#if HAS_GPS
if (config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_ENABLED) {
// Line 3
if (config.display.gps_format !=
meshtastic_Config_DisplayConfig_GpsCoordinateFormat_DMS) // if DMS then don't draw altitude
UIRenderer::drawGpsAltitude(display, x, y + FONT_HEIGHT_SMALL * 2, gpsStatus);
// Line 4
UIRenderer::drawGpsCoordinates(display, x, y + FONT_HEIGHT_SMALL * 3, gpsStatus);
} else {
UIRenderer::drawGpsPowerStatus(display, x, y + FONT_HEIGHT_SMALL * 2, gpsStatus);
}
#endif
/* Display a heartbeat pixel that blinks every time the frame is redrawn */
#ifdef SHOW_REDRAWS
if (heartbeat)
display->setPixel(0, 0);
heartbeat = !heartbeat;
#endif
}
// Trampoline functions for DebugInfo class access
void drawDebugInfoTrampoline(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
{
drawFrame(display, state, x, y);
}
void drawDebugInfoSettingsTrampoline(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
{
drawFrameSettings(display, state, x, y);
}
void drawDebugInfoWiFiTrampoline(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
{
drawFrameWiFi(display, state, x, y);
}
// ****************************
// * LoRa Focused Screen *
// ****************************
void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
{
display->clear();
display->setTextAlignment(TEXT_ALIGN_LEFT);
display->setFont(FONT_SMALL);
int line = 1;
// === Set Title
const char *titleStr = (SCREEN_WIDTH > 128) ? "LoRa Info" : "LoRa";
// === Header ===
graphics::drawCommonHeader(display, x, y, titleStr);
// === First Row: Region / BLE Name ===
graphics::UIRenderer::drawNodes(display, x, getTextPositions(display)[line] + 2, nodeStatus, 0, true, "");
uint8_t dmac[6];
char shortnameble[35];
getMacAddr(dmac);
snprintf(screen->ourId, sizeof(screen->ourId), "%02x%02x", dmac[4], dmac[5]);
snprintf(shortnameble, sizeof(shortnameble), "BLE: %s", screen->ourId);
int textWidth = display->getStringWidth(shortnameble);
int nameX = (SCREEN_WIDTH - textWidth);
display->drawString(nameX, getTextPositions(display)[line++], shortnameble);
// === Second Row: Radio Preset ===
auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false);
char regionradiopreset[25];
const char *region = myRegion ? myRegion->name : NULL;
if (region != nullptr) {
snprintf(regionradiopreset, sizeof(regionradiopreset), "%s/%s", region, mode);
}
textWidth = display->getStringWidth(regionradiopreset);
nameX = (SCREEN_WIDTH - textWidth) / 2;
display->drawString(nameX, getTextPositions(display)[line++], regionradiopreset);
// === Third Row: Frequency / ChanNum ===
char frequencyslot[35];
char freqStr[16];
float freq = RadioLibInterface::instance->getFreq();
snprintf(freqStr, sizeof(freqStr), "%.3f", freq);
if (config.lora.channel_num == 0) {
snprintf(frequencyslot, sizeof(frequencyslot), "Freq: %smhz", freqStr);
} else {
snprintf(frequencyslot, sizeof(frequencyslot), "Freq/Ch: %smhz (%d)", freqStr, config.lora.channel_num);
}
size_t len = strlen(frequencyslot);
if (len >= 4 && strcmp(frequencyslot + len - 4, " (0)") == 0) {
frequencyslot[len - 4] = '\0'; // Remove the last three characters
}
textWidth = display->getStringWidth(frequencyslot);
nameX = (SCREEN_WIDTH - textWidth) / 2;
display->drawString(nameX, getTextPositions(display)[line++], frequencyslot);
// === Fourth Row: Channel Utilization ===
const char *chUtil = "ChUtil:";
char chUtilPercentage[10];
snprintf(chUtilPercentage, sizeof(chUtilPercentage), "%2.0f%%", airTime->channelUtilizationPercent());
int chUtil_x = (SCREEN_WIDTH > 128) ? display->getStringWidth(chUtil) + 10 : display->getStringWidth(chUtil) + 5;
int chUtil_y = getTextPositions(display)[line] + 3;
int chutil_bar_width = (SCREEN_WIDTH > 128) ? 100 : 50;
int chutil_bar_height = (SCREEN_WIDTH > 128) ? 12 : 7;
int extraoffset = (SCREEN_WIDTH > 128) ? 6 : 3;
int chutil_percent = airTime->channelUtilizationPercent();
int centerofscreen = SCREEN_WIDTH / 2;
int total_line_content_width = (chUtil_x + chutil_bar_width + display->getStringWidth(chUtilPercentage) + extraoffset) / 2;
int starting_position = centerofscreen - total_line_content_width;
display->drawString(starting_position, getTextPositions(display)[line++], chUtil);
// Force 56% or higher to show a full 100% bar, text would still show related percent.
if (chutil_percent >= 61) {
chutil_percent = 100;
}
// Weighting for nonlinear segments
float milestone1 = 25;
float milestone2 = 40;
float weight1 = 0.45; // Weight for 025%
float weight2 = 0.35; // Weight for 2540%
float weight3 = 0.20; // Weight for 40100%
float totalWeight = weight1 + weight2 + weight3;
int seg1 = chutil_bar_width * (weight1 / totalWeight);
int seg2 = chutil_bar_width * (weight2 / totalWeight);
int seg3 = chutil_bar_width * (weight3 / totalWeight);
int fillRight = 0;
if (chutil_percent <= milestone1) {
fillRight = (seg1 * (chutil_percent / milestone1));
} else if (chutil_percent <= milestone2) {
fillRight = seg1 + (seg2 * ((chutil_percent - milestone1) / (milestone2 - milestone1)));
} else {
fillRight = seg1 + seg2 + (seg3 * ((chutil_percent - milestone2) / (100 - milestone2)));
}
// Draw outline
display->drawRect(starting_position + chUtil_x, chUtil_y, chutil_bar_width, chutil_bar_height);
// Fill progress
if (fillRight > 0) {
display->fillRect(starting_position + chUtil_x, chUtil_y, fillRight, chutil_bar_height);
}
display->drawString(starting_position + chUtil_x + chutil_bar_width + extraoffset, getTextPositions(display)[4],
chUtilPercentage);
}
// ****************************
// * Memory Screen *
// ****************************
void drawMemoryUsage(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
{
display->clear();
display->setFont(FONT_SMALL);
display->setTextAlignment(TEXT_ALIGN_LEFT);
// === Set Title
const char *titleStr = "System";
// === Header ===
graphics::drawCommonHeader(display, x, y, titleStr);
// === Layout ===
int line = 1;
const int barHeight = 6;
const int labelX = x;
const int barsOffset = (SCREEN_WIDTH > 128) ? 24 : 0;
const int barX = x + 40 + barsOffset;
auto drawUsageRow = [&](const char *label, uint32_t used, uint32_t total, bool isHeap = false) {
if (total == 0)
return;
int percent = (used * 100) / total;
char combinedStr[24];
if (SCREEN_WIDTH > 128) {
snprintf(combinedStr, sizeof(combinedStr), "%s%3d%% %u/%uKB", (percent > 80) ? "! " : "", percent, used / 1024,
total / 1024);
} else {
snprintf(combinedStr, sizeof(combinedStr), "%s%3d%%", (percent > 80) ? "! " : "", percent);
}
int textWidth = display->getStringWidth(combinedStr);
int adjustedBarWidth = SCREEN_WIDTH - barX - textWidth - 6;
if (adjustedBarWidth < 10)
adjustedBarWidth = 10;
int fillWidth = (used * adjustedBarWidth) / total;
// Label
display->setTextAlignment(TEXT_ALIGN_LEFT);
display->drawString(labelX, getTextPositions(display)[line], label);
// Bar
int barY = getTextPositions(display)[line] + (FONT_HEIGHT_SMALL - barHeight) / 2;
display->setColor(WHITE);
display->drawRect(barX, barY, adjustedBarWidth, barHeight);
display->fillRect(barX, barY, fillWidth, barHeight);
display->setColor(WHITE);
// Value string
display->setTextAlignment(TEXT_ALIGN_RIGHT);
display->drawString(SCREEN_WIDTH - 2, getTextPositions(display)[line], combinedStr);
};
// === Memory values ===
uint32_t heapUsed = memGet.getHeapSize() - memGet.getFreeHeap();
uint32_t heapTotal = memGet.getHeapSize();
uint32_t psramUsed = memGet.getPsramSize() - memGet.getFreePsram();
uint32_t psramTotal = memGet.getPsramSize();
uint32_t flashUsed = 0, flashTotal = 0;
#ifdef ESP32
flashUsed = FSCom.usedBytes();
flashTotal = FSCom.totalBytes();
#endif
uint32_t sdUsed = 0, sdTotal = 0;
bool hasSD = false;
/*
#ifdef HAS_SDCARD
hasSD = SD.cardType() != CARD_NONE;
if (hasSD) {
sdUsed = SD.usedBytes();
sdTotal = SD.totalBytes();
}
#endif
*/
// === Draw memory rows
drawUsageRow("Heap:", heapUsed, heapTotal, true);
#ifdef ESP32
if (psramUsed > 0) {
line += 1;
drawUsageRow("PSRAM:", psramUsed, psramTotal);
}
if (flashTotal > 0) {
line += 1;
drawUsageRow("Flash:", flashUsed, flashTotal);
}
#endif
if (hasSD && sdTotal > 0) {
line += 1;
drawUsageRow("SD:", sdUsed, sdTotal);
}
display->setTextAlignment(TEXT_ALIGN_LEFT);
// System Uptime
if (line < 2) {
line += 1;
}
line += 1;
char appversionstr[35];
snprintf(appversionstr, sizeof(appversionstr), "Ver.: %s", optstr(APP_VERSION));
int textWidth = display->getStringWidth(appversionstr);
int nameX = (SCREEN_WIDTH - textWidth) / 2;
display->drawString(nameX, getTextPositions(display)[line], appversionstr);
if (SCREEN_HEIGHT > 64 || (SCREEN_HEIGHT <= 64 && line < 4)) { // Only show uptime if the screen can show it
line += 1;
char uptimeStr[32] = "";
uint32_t uptime = millis() / 1000;
uint32_t days = uptime / 86400;
uint32_t hours = (uptime % 86400) / 3600;
uint32_t mins = (uptime % 3600) / 60;
// Show as "Up: 2d 3h", "Up: 5h 14m", or "Up: 37m"
if (days)
snprintf(uptimeStr, sizeof(uptimeStr), " Up: %ud %uh", days, hours);
else if (hours)
snprintf(uptimeStr, sizeof(uptimeStr), " Up: %uh %um", hours, mins);
else
snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %um", mins);
textWidth = display->getStringWidth(uptimeStr);
nameX = (SCREEN_WIDTH - textWidth) / 2;
display->drawString(nameX, getTextPositions(display)[line], uptimeStr);
}
}
} // namespace DebugRenderer
} // namespace graphics
#endif