mirror of
https://github.com/meshtastic/firmware.git
synced 2025-08-18 11:13:29 +00:00
d97e6b86b8
* Fix protobuf structs handling (#4140) * Fix protobuf structs handling * Log instead of assert --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * BLE based logging (#4146) * WIP log characteristic * Bluetooth logging plumbing * Characteristic * Callback * Check for nullptr * Esp32 bluetooth impl * Formatting * Add thread name and log level * Add settings guard * Remove comments * Field name * Fixes esp32 * Open it up * Whoops * Move va_end past our logic * Use `upload_protocol = esptool` as with the other heltec devices instead of `esp-builtin` (#4151) * Standardize lat/lon position logs (#4156) * Standardize lat/lon position logs * Missed sone and condensed logs * [create-pull-request] automated change (#4157) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Pause BLE logging during want_config flow (#4162) * Update NimBLE to 1.4.2 (#4163) * Implement replies for all telemetry types based on variant tag (#4164) * Implement replies for all telemetry types based on variant tag * Remove check for `ignoreRequest`: modules can set this, don't need to check --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Esptool is better * Explicitly set characteristic * fix INA3221 sensor (#4168) - pass wire to begin() - remove redundant setAddr() (already set in header) * Show compass on waypoint frame; clear when waypoint deleted (#4116) * Clear expired or deleted waypoint frame * Return 0 to CallbackObserver * Add a missing comment * Draw compass for waypoint frame * Display our own waypoints * [create-pull-request] automated change (#4171) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Add semihosting support for nrf52 devices (#4137) * Turn off vscode cmake prompt - we don't use cmake on meshtastic * Add rak4631_dap variant for debugging with NanoDAP debug probe device. * The rak device can also run freertos (which is underneath nrf52 arduino) * Add semihosting support for nrf52840 devices Initial platformio.ini file only supports rak4630 Default to non TCP for the semihosting log output for now... Fixes https://github.com/meshtastic/firmware/issues/4135 * fix my botched merge - keep board_level = extra flag for rak3631_dbg --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * [create-pull-request] automated change (#4174) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Display alerts (#4170) * Move static functions into Screen.h, show compass during calibration * Move to _fontHeight macro to avoid collision * Move some alert functions to new alert handler * Catch missed reboot code * ESP32 fixes * Bump esp8266-oled-ssd1306 * Fixes for when a device has no screen * Use new startAlert(char*) helper class * Add EINK bits back to alert handling * Add noop class for no-display devices --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Send file system manifest up on want_config (#4176) * Send file system manifest up on want_config * Platform specific methods * Helps to actually make the change * Clear * tell vscode, if formatting, use whatever our trunk formatter wants (#4186) without this flag if the user has set some other formatter (clang) in their user level settings, it will be looking in the wrong directory for the clang options (we want the options in .trunk/clang) Note: formatOnSave is true in master, which means a bunch of our older files are non compliant and if you edit them it will generate lots of formatting related diffs. I guess I'll start letting that happen with my future commits ;-). * fix the build - would loop forever if there were no files to send (#4188) * Show owner.short_name on boot (and E-Ink sleep screen) (#4134) * Show owner.short_name on boot and sleep screen (on e-ink) * Update Screen.cpp - new line for short_name Boot screen short_name now below the region setting. Looks better on small screens. * Draw short_name on right --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * nrf52 soft device will watchdog if you use ICE while BT on... (#4189) so have debugger disable bluetooth. * correct xiao_ble build preventing sx1262 init (#4191) * Force a compile time failur if FromRadio or ToRadio get larger than (#4190) a BLE packet size. We are actually very close to this threshold so important to make sure we don't accidentally pass it. * Clear vector after complete config state (#4194) * Clear after complete config * Don't collect . entries * Log file name and size * [create-pull-request] automated change (#4200) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Make the logs Colorful! (#4199) * Squash needlessly static functions (#4183) * Trim extra vprintf and filter for unprintable characters * Deprecate Router Client role (and make it Client) (#4201) * [create-pull-request] automated change (#4205) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Move waypoint (#4202) * Move waypoint screen draw into the waypoint module * Get the observer set up for the waypoint screen draw * Static squashing: screen dimensions Macros moved back to Screen.cpp, as a band-aid until we eventually move all those static functions into the Screen class. * Move getCompassDiam into Screen class (supress compiler warnings) At this stage, the method is still static, because it's used by drawNodeInfo, which has no tidy reference to our screen instance. This is probably just another band-aid until these static functions all move. * Use new getCompassDiam function in AccelerometerThread * Properly gate display code in WaypointModule --------- Co-authored-by: Todd Herbert <herbert.todd@gmail.com> * Fix flakey phone api transition from file manifest to complete (#4209) * Try fix flakey phone api transition from file manifest to complete * Skip * enable colors in platformio serial monitor (#4217) * When talking via serial, encapsulate log messages in protobufs if necessary (#4187) * clean up RedirectablePrint::log so it doesn't have three very different implementations inline. * remove NoopPrint - it is no longer needed * when talking to API clients via serial, don't turn off log msgs instead encapsuate them * fix the build - would loop forever if there were no files to send * don't use Segger code if not talking to a Segger debugger * when encapsulating logs, make sure the strings always has nul terminators * nrf52 soft device will watchdog if you use ICE while BT on... so have debugger disable bluetooth. * Important to not print debug messages while writing to the toPhone scratch buffer * don't include newlines if encapsulating log records as protobufs --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * [create-pull-request] automated change (#4218) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Fix SHT41 support (#4222) * Add SHT41 Serial to I2c Detection Code On the Seeed Wio-WM1110 Dev Kit board, the SHT41 chip was being incorrectly detected as SHT31. This patch adds the necessary serial number for the SHT41 chip to be correctly detected. fixes meshtastic/firmware#4221 * Add missing sensor read for SHT41 * Typo fix in logs - mhz - MHz (#4225) As reported by karamo, a few different places in our logs had incorrect capitalization of MHz. fixes meshtastic/firmware#4126 * New new BLE logging characteristic with LogRecord protos (#4220) * New UUID * New log radio characteristic with LogRecord protobuf * LogRecord * Merge derp * How did you get there * Trunk * Fix length * Remove assert * minor cleanup proposal (#4169) * MESHTASTIC_EXCLUDE_WIFI and HAS_WIFI cleanup... Our code was checking HAS_WIFI and the new MESHTASTIC_EXCLUDE_WIFI flags in various places (even though EXCLUDE_WIFI forces HAS_WIFI to 0). Instead just check HAS_WIFI, only use EXCLUDE_WIFI inside configuration.h * cleanup: use HAS_NETWORKING instead of HAS_WIFI || HAS_ETHERNET We already had HAS_NETWORKING as flag in MQTT to mean 'we have tcpip'. Generallize that and move it into configuration.h so that we can use it elsewhere. * Use #pragma once, because supported by gcc and all modern compilers instead of #ifdef DOTHFILE_H etc... --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> * Add PowerMon support (#4155) * Turn off vscode cmake prompt - we don't use cmake on meshtastic * Add rak4631_dap variant for debugging with NanoDAP debug probe device. * The rak device can also run freertos (which is underneath nrf52 arduino) * Add semihosting support for nrf52840 devices Initial platformio.ini file only supports rak4630 Default to non TCP for the semihosting log output for now... Fixes https://github.com/meshtastic/firmware/issues/4135 * powermon WIP (for https://github.com/meshtastic/firmware/issues/4136 ) * oops - mean't to mark the _dbg variant as an 'extra' board. * powermon wip * Make serial port on wio-sdk-wm1110 board work By disabling the (inaccessible) adafruit USB * Instrument (radiolib only for now) lora for powermon per https://github.com/meshtastic/firmware/issues/4136 * powermon gps support https://github.com/meshtastic/firmware/issues/4136 * Add CPU deep and light sleep powermon states https://github.com/meshtastic/firmware/issues/4136 * Change the board/swversion bootstring so it is a new "structured" log msg. * powermon wip * add example script for getting esp S3 debugging working Not yet used but I didn't want these nasty tricks to get lost yet. * Add PowerMon reporting for screen and bluetooth pwr. * make power.powermon_enables config setting work. * update to latest protobufs * fix bogus shellcheck warning * make powermon optional (but default enabled because tiny and no runtime impact) * tell vscode, if formatting, use whatever our trunk formatter wants without this flag if the user has set some other formatter (clang) in their user level settings, it will be looking in the wrong directory for the clang options (we want the options in .trunk/clang) Note: formatOnSave is true in master, which means a bunch of our older files are non compliant and if you edit them it will generate lots of formatting related diffs. I guess I'll start letting that happen with my future commits ;-). * add PowerStress module * nrf52 arduino is built upon freertos, so let platformio debug it * don't accidentally try to Segger ICE if we are using another ICE * clean up RedirectablePrint::log so it doesn't have three very different implementations inline. * remove NoopPrint - it is no longer needed * when talking to API clients via serial, don't turn off log msgs instead encapsuate them * fix the build - would loop forever if there were no files to send * don't use Segger code if not talking to a Segger debugger * when encapsulating logs, make sure the strings always has nul terminators * nrf52 soft device will watchdog if you use ICE while BT on... so have debugger disable bluetooth. * Important to not print debug messages while writing to the toPhone scratch buffer * don't include newlines if encapsulating log records as protobufs * update to latest protobufs (needed for powermon goo) * PowerStress WIP * fix linter warning * Cleanup buffer * Merge hex for wm1110 target(s) * Only sdk * Sudo * Fix exclude macros (#4233) * fix MESHTASTIC_EXCLUDE_BLUETOOTH * fix HAS_SCREEN=0 * fix MESHTASTIC_EXCLUDE_GPS * fix typo in build-nrf52.sh (#4231) chmod is the command, '+x' is the argument. * Tidy Wireless Paper variant files (#4238) * Quick tidy of pins_arduino.h Matches requests made at https://github.com/meshtastic/firmware/pull/4226#discussion_r1664183480) * Tidy variant.h * Change deprecated ADC attenuation parameter From 11dB to 12dB. Resolves compiler warning. Allegly, no impact on function: `This is deprecated, it behaves the same as `ADC_ATTEN_DB_12` * Updated raspbian CI to update apt repository ahead of libbluetooth. (#4243) * Fix BLE logging on nrf52 (#4244) * allow ble logrecords to be fetched either by NOTIFY or INDICATE ble types This allows 'lossless' log reading. If client has requested INDICATE (rather than NOTIFY) each log record emitted via log() will have to fetched by the client device before the meshtastic node can continue. * Fix serious problem with nrf52 BLE logging. When doing notifies of LogRecords it is important to use the binary write routines - writing using the 'string' write won't work. Because protobufs can contain \0 nuls inside of them which if being parsed as a string will cause only a portion of the protobuf to be sent. I noticed this because some log messages were not getting through. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Fix build when HAS_NETWORKING is false on nrf52 (#4237) (tested on a rak4631 by setting HAS_ETHERNET false when shrinking image) * If `toPhoneQueue` is full, still increment `fromNum` to avoid client never getting packets (#4246) * Update to SoftDevice 7.3.0 for wio-sdk-wm1110 and wio-tracker-wm1110 (#4248) * Update variant.h * Update wio-tracker-wm1110.json * Update wio-sdk-wm1110.json * Update platformio.ini * Update platformio.ini * Add files via upload * Add files via upload * Update variant.h --------- Co-authored-by: Mike <mikhael.skvortsov@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Mike G <mkgin@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com> Co-authored-by: Warren Guy <5602790+warrenguy@users.noreply.github.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: geeksville <kevinh@geeksville.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Alexander <156134901+Dorn8010@users.noreply.github.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: quimnut <github@dopegoat.com> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> Co-authored-by: Agent Blu, 006 <blu006@ucr.edu> Co-authored-by: Mark Trevor Birss <markbirss@gmail.com>
136 lines
6.2 KiB
C
136 lines
6.2 KiB
C
/*
|
|
* Copyright (c) Nordic Semiconductor ASA
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright notice, this
|
|
* list of conditions and the following disclaimer.
|
|
*
|
|
* 2. Redistributions in binary form, except as embedded into a Nordic
|
|
* Semiconductor ASA integrated circuit in a product or a software update for
|
|
* such product, must reproduce the above copyright notice, this list of
|
|
* conditions and the following disclaimer in the documentation and/or other
|
|
* materials provided with the distribution.
|
|
*
|
|
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
|
* contributors may be used to endorse or promote products derived from this
|
|
* software without specific prior written permission.
|
|
*
|
|
* 4. This software, with or without modification, must only be used with a
|
|
* Nordic Semiconductor ASA integrated circuit.
|
|
*
|
|
* 5. Any software provided in binary form under this license must not be reverse
|
|
* engineered, decompiled, modified and/or disassembled.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
|
|
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
|
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
|
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/**
|
|
@addtogroup BLE_COMMON
|
|
@{
|
|
*/
|
|
|
|
#ifndef BLE_HCI_H__
|
|
#define BLE_HCI_H__
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/** @defgroup BLE_HCI_STATUS_CODES Bluetooth status codes
|
|
* @{ */
|
|
|
|
#define BLE_HCI_STATUS_CODE_SUCCESS 0x00 /**< Success. */
|
|
#define BLE_HCI_STATUS_CODE_UNKNOWN_BTLE_COMMAND 0x01 /**< Unknown BLE Command. */
|
|
#define BLE_HCI_STATUS_CODE_UNKNOWN_CONNECTION_IDENTIFIER 0x02 /**< Unknown Connection Identifier. */
|
|
/*0x03 Hardware Failure
|
|
0x04 Page Timeout
|
|
*/
|
|
#define BLE_HCI_AUTHENTICATION_FAILURE 0x05 /**< Authentication Failure. */
|
|
#define BLE_HCI_STATUS_CODE_PIN_OR_KEY_MISSING 0x06 /**< Pin or Key missing. */
|
|
#define BLE_HCI_MEMORY_CAPACITY_EXCEEDED 0x07 /**< Memory Capacity Exceeded. */
|
|
#define BLE_HCI_CONNECTION_TIMEOUT 0x08 /**< Connection Timeout. */
|
|
/*0x09 Connection Limit Exceeded
|
|
0x0A Synchronous Connection Limit To A Device Exceeded
|
|
0x0B ACL Connection Already Exists*/
|
|
#define BLE_HCI_STATUS_CODE_COMMAND_DISALLOWED 0x0C /**< Command Disallowed. */
|
|
/*0x0D Connection Rejected due to Limited Resources
|
|
0x0E Connection Rejected Due To Security Reasons
|
|
0x0F Connection Rejected due to Unacceptable BD_ADDR
|
|
0x10 Connection Accept Timeout Exceeded
|
|
0x11 Unsupported Feature or Parameter Value*/
|
|
#define BLE_HCI_STATUS_CODE_INVALID_BTLE_COMMAND_PARAMETERS 0x12 /**< Invalid BLE Command Parameters. */
|
|
#define BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION 0x13 /**< Remote User Terminated Connection. */
|
|
#define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES \
|
|
0x14 /**< Remote Device Terminated Connection due to low \
|
|
resources.*/
|
|
#define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF 0x15 /**< Remote Device Terminated Connection due to power off. */
|
|
#define BLE_HCI_LOCAL_HOST_TERMINATED_CONNECTION 0x16 /**< Local Host Terminated Connection. */
|
|
/*
|
|
0x17 Repeated Attempts
|
|
0x18 Pairing Not Allowed
|
|
0x19 Unknown LMP PDU
|
|
*/
|
|
#define BLE_HCI_UNSUPPORTED_REMOTE_FEATURE 0x1A /**< Unsupported Remote Feature. */
|
|
/*
|
|
0x1B SCO Offset Rejected
|
|
0x1C SCO Interval Rejected
|
|
0x1D SCO Air Mode Rejected*/
|
|
#define BLE_HCI_STATUS_CODE_INVALID_LMP_PARAMETERS 0x1E /**< Invalid LMP Parameters. */
|
|
#define BLE_HCI_STATUS_CODE_UNSPECIFIED_ERROR 0x1F /**< Unspecified Error. */
|
|
/*0x20 Unsupported LMP Parameter Value
|
|
0x21 Role Change Not Allowed
|
|
*/
|
|
#define BLE_HCI_STATUS_CODE_LMP_RESPONSE_TIMEOUT 0x22 /**< LMP Response Timeout. */
|
|
#define BLE_HCI_STATUS_CODE_LMP_ERROR_TRANSACTION_COLLISION 0x23 /**< LMP Error Transaction Collision/LL Procedure Collision. */
|
|
#define BLE_HCI_STATUS_CODE_LMP_PDU_NOT_ALLOWED 0x24 /**< LMP PDU Not Allowed. */
|
|
/*0x25 Encryption Mode Not Acceptable
|
|
0x26 Link Key Can Not be Changed
|
|
0x27 Requested QoS Not Supported
|
|
*/
|
|
#define BLE_HCI_INSTANT_PASSED 0x28 /**< Instant Passed. */
|
|
#define BLE_HCI_PAIRING_WITH_UNIT_KEY_UNSUPPORTED 0x29 /**< Pairing with Unit Key Unsupported. */
|
|
#define BLE_HCI_DIFFERENT_TRANSACTION_COLLISION 0x2A /**< Different Transaction Collision. */
|
|
/*
|
|
0x2B Reserved
|
|
0x2C QoS Unacceptable Parameter
|
|
0x2D QoS Rejected
|
|
0x2E Channel Classification Not Supported
|
|
0x2F Insufficient Security
|
|
*/
|
|
#define BLE_HCI_PARAMETER_OUT_OF_MANDATORY_RANGE 0x30 /**< Parameter Out Of Mandatory Range. */
|
|
/*
|
|
0x31 Reserved
|
|
0x32 Role Switch Pending
|
|
0x33 Reserved
|
|
0x34 Reserved Slot Violation
|
|
0x35 Role Switch Failed
|
|
0x36 Extended Inquiry Response Too Large
|
|
0x37 Secure Simple Pairing Not Supported By Host.
|
|
0x38 Host Busy - Pairing
|
|
0x39 Connection Rejected due to No Suitable Channel Found*/
|
|
#define BLE_HCI_CONTROLLER_BUSY 0x3A /**< Controller Busy. */
|
|
#define BLE_HCI_CONN_INTERVAL_UNACCEPTABLE 0x3B /**< Connection Interval Unacceptable. */
|
|
#define BLE_HCI_DIRECTED_ADVERTISER_TIMEOUT 0x3C /**< Directed Advertisement Timeout. */
|
|
#define BLE_HCI_CONN_TERMINATED_DUE_TO_MIC_FAILURE 0x3D /**< Connection Terminated due to MIC Failure. */
|
|
#define BLE_HCI_CONN_FAILED_TO_BE_ESTABLISHED 0x3E /**< Connection Failed to be Established. */
|
|
|
|
/** @} */
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
#endif // BLE_HCI_H__
|
|
|
|
/** @} */
|