firmware/bin/device-install.sh

#!/bin/bash

PYTHON=${PYTHON:-$(which python3 python | head -n 1)}
BPS_RESET=false
TFT_BUILD=false
MCU=""

# Constants
RESET_BAUD=1200
FIRMWARE_OFFSET=0x00

# Variant groups
BIGDB_8MB=(
	"picomputer-s3"
	"unphone"
	"seeed-sensecap-indicator"
	"crowpanel-esp32s3"
	"heltec_capsule_sensor_v3"
	"heltec-v3"
	"heltec-vision-master-e213"
	"heltec-vision-master-e290"
	"heltec-vision-master-t190"
	"heltec-wireless-paper"
	"heltec-wireless-tracker"
	"heltec-wsl-v3"
	"icarus"
	"seeed-xiao-s3"
	"tbeam-s3-core"
	"tracksenger"
)
BIGDB_16MB=(
	"t-deck"
	"mesh-tab"
	"t-energy-s3"
	"dreamcatcher"
	"ESP32-S3-Pico"
	"m5stack-cores3"
	"station-g2"
    "t-eth-elite"
    "tlora-pager"
    "t-watch-s3"
    "elecrow-adv"
)
S3_VARIANTS=(
    "s3"
    "-v3"
    "t-deck"
    "wireless-paper"
    "wireless-tracker"
    "station-g2"
    "unphone"
    "t-eth-elite"
    "tlora-pager"
    "mesh-tab"
    "dreamcatcher"
    "ESP32-S3-Pico"
    "seeed-sensecap-indicator"
    "heltec_capsule_sensor_v3"
    "vision-master"
    "icarus"
    "tracksenger"
    "elecrow-adv"
)

# Determine the correct esptool command to use
if "$PYTHON" -m esptool version >/dev/null 2>&1; then
    ESPTOOL_CMD="$PYTHON -m esptool"
elif command -v esptool >/dev/null 2>&1; then
    ESPTOOL_CMD="esptool"
elif command -v esptool.py >/dev/null 2>&1; then
    ESPTOOL_CMD="esptool.py"
else
    echo "Error: esptool not found"
    exit 1
fi

set -e

# Usage info
show_help() {
    cat <<EOF
Usage: $(basename "$0") [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME] [--1200bps-reset]
Flash image file to device, but first erasing and writing system information.

    -h               Display this help and exit.
    -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
    -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
    -f FILENAME      The firmware .bin file to flash.  Custom to your device type and region.
    --1200bps-reset  Attempt to place the device in correct mode. Some hardware requires this twice. (1200bps Reset)

EOF
}
# Parse arguments using a single while loop
while [ $# -gt 0 ]; do
    case "$1" in
    -h | --help)
        show_help
        exit 0
        ;;
    -p)
        ESPTOOL_CMD="$ESPTOOL_CMD --port $2"
        shift
        ;;
    -P)
        PYTHON="$2"
        shift
        ;;
    -f)
        FILENAME="$2"
        shift
        ;;
    --1200bps-reset)
		    BPS_RESET=true
		    ;;
    --) # Stop parsing options
        shift
        break
        ;;
    *)
        echo "Unknown argument: $1" >&2
        exit 1
        ;;
    esac
    shift # Move to the next argument
done

if [[ $BPS_RESET == true ]]; then
	$ESPTOOL_CMD --baud $RESET_BAUD --after no_reset read_flash_status
	exit 0
fi

[ -z "$FILENAME" ] && [ -n "$1" ] && {
    FILENAME="$1"
    shift
}

if [[ "$FILENAME" != firmware-* ]]; then
  echo "Filename must be a firmware-* file."
  exit 1
fi

# Check if FILENAME contains "-tft-" and set target partitionScheme accordingly.
if [[ "${FILENAME//-tft-/}" != "$FILENAME" ]]; then
    TFT_BUILD=true
fi

# Extract BASENAME from %FILENAME% for later use.
BASENAME="${FILENAME/firmware-/}"

if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
    # Default littlefs* offset.
    OFFSET=0x300000

    # Default OTA Offset
    OTA_OFFSET=0x260000

    # littlefs* offset for BigDB 8mb and OTA OFFSET.
    for variant in "${BIGDB_8MB[@]}"; do
        if [ -z "${FILENAME##*"$variant"*}" ]; then
            OFFSET=0x670000
            OTA_OFFSET=0x340000
        fi
    done

    # littlefs* offset for BigDB 16mb and OTA OFFSET.
    for variant in "${BIGDB_16MB[@]}"; do
        if [ -z "${FILENAME##*"$variant"*}" ]; then
            OFFSET=0xc90000
            OTA_OFFSET=0x650000
        fi
    done

    # Account for S3 board's different OTA partition
    # FIXME: Use PlatformIO info to determine MCU type, this is unmaintainable
    for variant in "${S3_VARIANTS[@]}"; do
        if [ -z "${FILENAME##*"$variant"*}" ]; then
            MCU="esp32s3"
        fi
    done

    if [ "$MCU" != "esp32s3" ]; then
        if [ -n "${FILENAME##*"esp32c3"*}" ]; then
            OTAFILE=bleota.bin
        else
            OTAFILE=bleota-c3.bin
        fi
    else
        OTAFILE=bleota-s3.bin
    fi

    # Set SPIFFS filename with "littlefs-" prefix.
    SPIFFSFILE=littlefs-${BASENAME}

    if [[ ! -f "$FILENAME" ]]; then
        echo "Error: file ${FILENAME} wasn't found. Terminating."
        exit 1
    fi
    if [[ ! -f "$OTAFILE" ]]; then
        echo "Error: file ${OTAFILE} wasn't found. Terminating."
        exit 1
    fi
    if [[ ! -f "$SPIFFSFILE" ]]; then
        echo "Error: file ${SPIFFSFILE} wasn't found. Terminating."
        exit 1
    fi

    echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
    $ESPTOOL_CMD erase-flash
    $ESPTOOL_CMD write-flash $FIRMWARE_OFFSET "${FILENAME}"
    echo "Trying to flash ${OTAFILE} at offset ${OTA_OFFSET}"
    $ESPTOOL_CMD write-flash $OTA_OFFSET "${OTAFILE}"
    echo "Trying to flash ${SPIFFSFILE}, at offset ${OFFSET}"
    $ESPTOOL_CMD write-flash $OFFSET "${SPIFFSFILE}"

else
    show_help
    echo "Invalid file: ${FILENAME}"
fi

exit 0