mirror of
https://github.com/meshtastic/firmware.git
synced 2025-06-18 19:12:09 +00:00
5c48e372ce
* Rework the OneButton thread to be much less of a mess. And break lots of targets temporarily * Update src/input/ButtonThread.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * fix GPS toggle * Send the shutdown event, not just the kbchar * Honor the back button in a notificaiton popup * Draw the right size box for popup with options * Try to un-break all the things --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
48 lines
1.5 KiB
C
48 lines
1.5 KiB
C
#define EXT_PWR_DETECT 20
|
|
|
|
#define BUTTON_PIN 17
|
|
#define BUTTON_ACTIVE_LOW false
|
|
#define BUTTON_ACTIVE_PULLUP false
|
|
|
|
#define BATTERY_PIN 7 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
|
|
#define ADC_CHANNEL ADC1_GPIO7_CHANNEL
|
|
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
|
|
#define ADC_MULTIPLIER (4.9 * 1.045)
|
|
#define ADC_CTRL 34 // active HIGH, powers the voltage divider. Only on 1.1
|
|
#define ADC_CTRL_ENABLED HIGH
|
|
|
|
#define HAS_NEOPIXEL // Enable the use of neopixels
|
|
#define NEOPIXEL_COUNT 1 // How many neopixels are connected
|
|
#define NEOPIXEL_DATA 18 // gpio pin used to send data to the neopixels
|
|
#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
|
|
|
|
#define USE_SX1262
|
|
#define LORA_DIO0 RADIOLIB_NC
|
|
#define LORA_RESET 12
|
|
#define LORA_DIO1 14 // SX1262 IRQ
|
|
#define LORA_DIO2 13 // SX1262 BUSY
|
|
|
|
#define LORA_SCK 9
|
|
#define LORA_MISO 11
|
|
#define LORA_MOSI 10
|
|
#define LORA_CS 8
|
|
|
|
#define SX126X_CS LORA_CS
|
|
#define SX126X_DIO1 LORA_DIO1
|
|
#define SX126X_BUSY LORA_DIO2
|
|
#define SX126X_RESET LORA_RESET
|
|
|
|
#define SX126X_DIO2_AS_RF_SWITCH
|
|
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
|
|
|
#define I2C_SDA 1
|
|
#define I2C_SCL 2
|
|
#define HAS_SCREEN 0
|
|
#define SENSOR_POWER_CTRL_PIN 33
|
|
#define SENSOR_POWER_ON 1
|
|
|
|
#define PERIPHERAL_WARMUP_MS 100
|
|
|
|
#define ESP32S3_WAKE_TYPE ESP_EXT1_WAKEUP_ANY_HIGH
|
|
|
|
#define ENVIRONMENTAL_TELEMETRY_MODULE_ENABLE 1 |