pohui_pohui/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-05-01 03:39:18 +00:00
Code Issues Actions 5 Packages Projects Releases Wiki Activity
7f0a8d329f
firmware/src/mesh/generated/config.pb.h
thebentern bca70d10d0 [create-pull-request] automated change
2023-01-03 12:20:39 +00:00

704 lines
34 KiB
C
Raw Blame History

/* Automatically generated nanopb header */
/* Generated by nanopb-0.4.7 */
#ifndef PB_CONFIG_PB_H_INCLUDED
#define PB_CONFIG_PB_H_INCLUDED
#include <pb.h>
#if PB_PROTO_HEADER_VERSION != 40
#error Regenerate this file with the current version of nanopb generator.
#endif
/* Enum definitions */
/* Defines the device's role on the Mesh network */
typedef enum _Config_DeviceConfig_Role {
/* Client device role */
Config_DeviceConfig_Role_CLIENT = 0,
/* Client Mute device role
Same as a client except packets will not hop over this node, does not contribute to routing packets for mesh. */
Config_DeviceConfig_Role_CLIENT_MUTE = 1,
/* Router device role.
Mesh packets will prefer to be routed over this node. This node will not be used by client apps.
The wifi/ble radios and the oled screen will be put to sleep. */
Config_DeviceConfig_Role_ROUTER = 2,
/* Router Client device role
Mesh packets will prefer to be routed over this node. The Router Client can be used as both a Router and an app connected Client. */
Config_DeviceConfig_Role_ROUTER_CLIENT = 3
} Config_DeviceConfig_Role;
/* Bit field of boolean configuration options, indicating which optional
fields to include when assembling POSITION messages
Longitude and latitude are always included (also time if GPS-synced)
NOTE: the more fields are included, the larger the message will be -
leading to longer airtime and a higher risk of packet loss */
typedef enum _Config_PositionConfig_PositionFlags {
/* Required for compilation */
Config_PositionConfig_PositionFlags_UNSET = 0,
/* Include an altitude value (if available) */
Config_PositionConfig_PositionFlags_ALTITUDE = 1,
/* Altitude value is MSL */
Config_PositionConfig_PositionFlags_ALTITUDE_MSL = 2,
/* Include geoidal separation */
Config_PositionConfig_PositionFlags_GEOIDAL_SEPARATION = 4,
/* Include the DOP value ; PDOP used by default, see below */
Config_PositionConfig_PositionFlags_DOP = 8,
/* If POS_DOP set, send separate HDOP / VDOP values instead of PDOP */
Config_PositionConfig_PositionFlags_HVDOP = 16,
/* Include number of "satellites in view" */
Config_PositionConfig_PositionFlags_SATINVIEW = 32,
/* Include a sequence number incremented per packet */
Config_PositionConfig_PositionFlags_SEQ_NO = 64,
/* Include positional timestamp (from GPS solution) */
Config_PositionConfig_PositionFlags_TIMESTAMP = 128,
/* Include positional heading
Intended for use with vehicle not walking speeds
walking speeds are likely to be error prone like the compass */
Config_PositionConfig_PositionFlags_HEADING = 256,
/* Include positional speed
Intended for use with vehicle not walking speeds
walking speeds are likely to be error prone like the compass */
Config_PositionConfig_PositionFlags_SPEED = 512
} Config_PositionConfig_PositionFlags;
typedef enum _Config_NetworkConfig_AddressMode {
/* obtain ip address via DHCP */
Config_NetworkConfig_AddressMode_DHCP = 0,
/* use static ip address */
Config_NetworkConfig_AddressMode_STATIC = 1
} Config_NetworkConfig_AddressMode;
/* How the GPS coordinates are displayed on the OLED screen. */
typedef enum _Config_DisplayConfig_GpsCoordinateFormat {
/* GPS coordinates are displayed in the normal decimal degrees format:
DD.DDDDDD DDD.DDDDDD */
Config_DisplayConfig_GpsCoordinateFormat_DEC = 0,
/* GPS coordinates are displayed in the degrees minutes seconds format:
DD°MM'SS"C DDD°MM'SS"C, where C is the compass point representing the locations quadrant */
Config_DisplayConfig_GpsCoordinateFormat_DMS = 1,
/* Universal Transverse Mercator format:
ZZB EEEEEE NNNNNNN, where Z is zone, B is band, E is easting, N is northing */
Config_DisplayConfig_GpsCoordinateFormat_UTM = 2,
/* Military Grid Reference System format:
ZZB CD EEEEE NNNNN, where Z is zone, B is band, C is the east 100k square, D is the north 100k square,
E is easting, N is northing */
Config_DisplayConfig_GpsCoordinateFormat_MGRS = 3,
/* Open Location Code (aka Plus Codes). */
Config_DisplayConfig_GpsCoordinateFormat_OLC = 4,
/* Ordnance Survey Grid Reference (the National Grid System of the UK).
Format: AB EEEEE NNNNN, where A is the east 100k square, B is the north 100k square,
E is the easting, N is the northing */
Config_DisplayConfig_GpsCoordinateFormat_OSGR = 5
} Config_DisplayConfig_GpsCoordinateFormat;
/* Unit display preference */
typedef enum _Config_DisplayConfig_DisplayUnits {
/* Metric (Default) */
Config_DisplayConfig_DisplayUnits_METRIC = 0,
/* Imperial */
Config_DisplayConfig_DisplayUnits_IMPERIAL = 1
} Config_DisplayConfig_DisplayUnits;
/* Override OLED outo detect with this if it fails. */
typedef enum _Config_DisplayConfig_OledType {
/* Default / Auto */
Config_DisplayConfig_OledType_OLED_AUTO = 0,
/* Default / Auto */
Config_DisplayConfig_OledType_OLED_SSD1306 = 1,
/* Default / Auto */
Config_DisplayConfig_OledType_OLED_SH1106 = 2
} Config_DisplayConfig_OledType;
typedef enum _Config_DisplayConfig_DisplayMode {
/* Default. The old style for the 128x64 OLED screen */
Config_DisplayConfig_DisplayMode_DEFAULT = 0,
/* Rearrange display elements to cater for bicolor OLED displays */
Config_DisplayConfig_DisplayMode_TWOCOLOR = 1,
/* Same as TwoColor, but with inverted top bar. Not so good for Epaper displays */
Config_DisplayConfig_DisplayMode_INVERTED = 2,
/* TFT Full Color Displays (not implemented yet) */
Config_DisplayConfig_DisplayMode_COLOR = 3
} Config_DisplayConfig_DisplayMode;
typedef enum _Config_LoRaConfig_RegionCode {
/* Region is not set */
Config_LoRaConfig_RegionCode_UNSET = 0,
/* United States */
Config_LoRaConfig_RegionCode_US = 1,
/* European Union 433mhz */
Config_LoRaConfig_RegionCode_EU_433 = 2,
/* European Union 433mhz */
Config_LoRaConfig_RegionCode_EU_868 = 3,
/* China */
Config_LoRaConfig_RegionCode_CN = 4,
/* Japan */
Config_LoRaConfig_RegionCode_JP = 5,
/* Australia / New Zealand */
Config_LoRaConfig_RegionCode_ANZ = 6,
/* Korea */
Config_LoRaConfig_RegionCode_KR = 7,
/* Taiwan */
Config_LoRaConfig_RegionCode_TW = 8,
/* Russia */
Config_LoRaConfig_RegionCode_RU = 9,
/* India */
Config_LoRaConfig_RegionCode_IN = 10,
/* New Zealand 865mhz */
Config_LoRaConfig_RegionCode_NZ_865 = 11,
/* Thailand */
Config_LoRaConfig_RegionCode_TH = 12,
/* WLAN Band */
Config_LoRaConfig_RegionCode_LORA_24 = 13
} Config_LoRaConfig_RegionCode;
/* Standard predefined channel settings
Note: these mappings must match ModemPreset Choice in the device code. */
typedef enum _Config_LoRaConfig_ModemPreset {
/* Long Range - Fast */
Config_LoRaConfig_ModemPreset_LONG_FAST = 0,
/* Long Range - Slow */
Config_LoRaConfig_ModemPreset_LONG_SLOW = 1,
/* Very Long Range - Slow */
Config_LoRaConfig_ModemPreset_VERY_LONG_SLOW = 2,
/* Medium Range - Slow */
Config_LoRaConfig_ModemPreset_MEDIUM_SLOW = 3,
/* Medium Range - Fast */
Config_LoRaConfig_ModemPreset_MEDIUM_FAST = 4,
/* Short Range - Slow */
Config_LoRaConfig_ModemPreset_SHORT_SLOW = 5,
/* Short Range - Fast */
Config_LoRaConfig_ModemPreset_SHORT_FAST = 6
} Config_LoRaConfig_ModemPreset;
typedef enum _Config_BluetoothConfig_PairingMode {
/* Device generates a random pin that will be shown on the screen of the device for pairing */
Config_BluetoothConfig_PairingMode_RANDOM_PIN = 0,
/* Device requires a specified fixed pin for pairing */
Config_BluetoothConfig_PairingMode_FIXED_PIN = 1,
/* Device requires no pin for pairing */
Config_BluetoothConfig_PairingMode_NO_PIN = 2
} Config_BluetoothConfig_PairingMode;
/* Struct definitions */
/* Configuration */
typedef struct _Config_DeviceConfig {
/* Sets the role of node */
Config_DeviceConfig_Role role;
/* Disabling this will disable the SerialConsole by not initilizing the StreamAPI */
bool serial_enabled;
/* By default we turn off logging as soon as an API client connects (to keep shared serial link quiet).
Set this to true to leave the debug log outputting even when API is active. */
bool debug_log_enabled;
/* For boards without a hard wired button, this is the pin number that will be used
Boards that have more than one button can swap the function with this one. defaults to BUTTON_PIN if defined. */
uint32_t button_gpio;
/* For boards without a PWM buzzer, this is the pin number that will be used
Defaults to PIN_BUZZER if defined. */
uint32_t buzzer_gpio;
} Config_DeviceConfig;
/* Position Config */
typedef struct _Config_PositionConfig {
/* We should send our position this often (but only if it has changed significantly)
Defaults to 15 minutes */
uint32_t position_broadcast_secs;
/* Adaptive position braoadcast, which is now the default. */
bool position_broadcast_smart_enabled;
/* If set, this node is at a fixed position.
We will generate GPS position updates at the regular interval, but use whatever the last lat/lon/alt we have for the node.
The lat/lon/alt can be set by an internal GPS or with the help of the app. */
bool fixed_position;
/* Is GPS enabled for this node? */
bool gps_enabled;
/* How often should we try to get GPS position (in seconds)
or zero for the default of once every 30 seconds
or a very large value (maxint) to update only once at boot. */
uint32_t gps_update_interval;
/* How long should we try to get our position during each gps_update_interval attempt? (in seconds)
Or if zero, use the default of 30 seconds.
If we don't get a new gps fix in that time, the gps will be put into sleep until the next gps_update_rate
window. */
uint32_t gps_attempt_time;
/* Bit field of boolean configuration options for POSITION messages
(bitwise OR of PositionFlags) */
uint32_t position_flags;
/* (Re)define GPS_RX_PIN for your board. */
uint32_t rx_gpio;
/* (Re)define GPS_TX_PIN for your board. */
uint32_t tx_gpio;
} Config_PositionConfig;
/* Power Config\
See [Power Config](/docs/settings/config/power) for additional power config details. */
typedef struct _Config_PowerConfig {
/* If set, we are powered from a low-current source (i.e. solar), so even if it looks like we have power flowing in
we should try to minimize power consumption as much as possible.
YOU DO NOT NEED TO SET THIS IF YOU'VE set is_router (it is implied in that case).
Advanced Option */
bool is_power_saving;
/* If non-zero, the device will fully power off this many seconds after external power is removed. */
uint32_t on_battery_shutdown_after_secs;
/* Ratio of voltage divider for battery pin eg. 3.20 (R1=100k, R2=220k)
Overrides the ADC_MULTIPLIER defined in variant for battery voltage calculation.
Should be set to floating point value between 2 and 4
Fixes issues on Heltec v2 */
float adc_multiplier_override;
/* Wait Bluetooth Seconds
The number of seconds for to wait before turning off BLE in No Bluetooth states
0 for default of 1 minute */
uint32_t wait_bluetooth_secs;
/* Mesh Super Deep Sleep Timeout Seconds
While in Light Sleep if this value is exceeded we will lower into super deep sleep
for sds_secs (default 1 year) or a button press
0 for default of two hours, MAXUINT for disabled */
uint32_t mesh_sds_timeout_secs;
/* Super Deep Sleep Seconds
While in Light Sleep if mesh_sds_timeout_secs is exceeded we will lower into super deep sleep
for this value (default 1 year) or a button press
0 for default of one year */
uint32_t sds_secs;
/* Light Sleep Seconds
In light sleep the CPU is suspended, LoRa radio is on, BLE is off an GPS is on
ESP32 Only
0 for default of 300 */
uint32_t ls_secs;
/* Minimum Wake Seconds
While in light sleep when we receive packets on the LoRa radio we will wake and handle them and stay awake in no BLE mode for this value
0 for default of 10 seconds */
uint32_t min_wake_secs;
} Config_PowerConfig;
typedef struct _Config_NetworkConfig_IpV4Config {
/* Static IP address */
uint32_t ip;
/* Static gateway address */
uint32_t gateway;
/* Static subnet mask */
uint32_t subnet;
/* Static DNS server address */
uint32_t dns;
} Config_NetworkConfig_IpV4Config;
/* Network Config */
typedef struct _Config_NetworkConfig {
/* Enable WiFi (disables Bluetooth) */
bool wifi_enabled;
/* If set, this node will try to join the specified wifi network and
acquire an address via DHCP */
char wifi_ssid[33];
/* If set, will be use to authenticate to the named wifi */
char wifi_psk[64];
/* NTP server to use if WiFi is conneced, defaults to `0.pool.ntp.org` */
char ntp_server[33];
/* Enable Ethernet */
bool eth_enabled;
/* acquire an address via DHCP or assign static */
Config_NetworkConfig_AddressMode address_mode;
/* struct to keep static address */
bool has_ipv4_config;
Config_NetworkConfig_IpV4Config ipv4_config;
} Config_NetworkConfig;
/* Display Config */
typedef struct _Config_DisplayConfig {
/* Number of seconds the screen stays on after pressing the user button or receiving a message
0 for default of one minute MAXUINT for always on */
uint32_t screen_on_secs;
/* How the GPS coordinates are formatted on the OLED screen. */
Config_DisplayConfig_GpsCoordinateFormat gps_format;
/* Automatically toggles to the next page on the screen like a carousel, based the specified interval in seconds.
Potentially useful for devices without user buttons. */
uint32_t auto_screen_carousel_secs;
/* If this is set, the displayed compass will always point north. if unset, the old behaviour
(top of display is heading direction) is used. */
bool compass_north_top;
/* Flip screen vertically, for cases that mount the screen upside down */
bool flip_screen;
/* Perferred display units */
Config_DisplayConfig_DisplayUnits units;
/* Override auto-detect in screen */
Config_DisplayConfig_OledType oled;
/* Display Mode */
Config_DisplayConfig_DisplayMode displaymode;
/* Print first line in pseudo-bold? FALSE is original style, TRUE is bold */
bool heading_bold;
} Config_DisplayConfig;
/* Lora Config */
typedef struct _Config_LoRaConfig {
/* When enabled, the `modem_preset` fields will be adheared to, else the `bandwidth`/`spread_factor`/`coding_rate`
will be taked from their respective manually defined fields */
bool use_preset;
/* Either modem_config or bandwidth/spreading/coding will be specified - NOT BOTH.
As a heuristic: If bandwidth is specified, do not use modem_config.
Because protobufs take ZERO space when the value is zero this works out nicely.
This value is replaced by bandwidth/spread_factor/coding_rate.
If you'd like to experiment with other options add them to MeshRadio.cpp in the device code. */
Config_LoRaConfig_ModemPreset modem_preset;
/* Bandwidth in MHz
Certain bandwidth numbers are 'special' and will be converted to the
appropriate floating point value: 31 -> 31.25MHz */
uint16_t bandwidth;
/* A number from 7 to 12.
Indicates number of chirps per symbol as 1<<spread_factor. */
uint32_t spread_factor;
/* The denominator of the coding rate.
ie for 4/5, the value is 5. 4/8 the value is 8. */
uint8_t coding_rate;
/* This parameter is for advanced users with advanced test equipment, we do not recommend most users use it.
A frequency offset that is added to to the calculated band center frequency.
Used to correct for crystal calibration errors. */
float frequency_offset;
/* The region code for the radio (US, CN, EU433, etc...) */
Config_LoRaConfig_RegionCode region;
/* Maximum number of hops. This can't be greater than 7.
Default of 3 */
uint32_t hop_limit;
/* Disable TX from the LoRa radio. Useful for hot-swapping antennas and other tests.
Defaults to false */
bool tx_enabled;
/* If zero then, use default max legal continuous power (ie. something that won't
burn out the radio hardware)
In most cases you should use zero here.
Units are in dBm. */
int8_t tx_power;
/* This is controlling the actual hardware frequency the radio is transmitting on.
Most users should never need to be exposed to this field/concept.
A channel number between 1 and NUM_CHANNELS (whatever the max is in the current region).
If ZERO then the rule is "use the old channel name hash based
algorithm to derive the channel number")
If using the hash algorithm the channel number will be: hash(channel_name) %
NUM_CHANNELS (Where num channels depends on the regulatory region). */
uint16_t channel_num;
/* If true, duty cycle limits will be exceeded and thus you're possibly not following
the local regulations if you're not a HAM.
Has no effect if the duty cycle of the used region is 100%. */
bool override_duty_cycle;
/* For testing it is useful sometimes to force a node to never listen to
particular other nodes (simulating radio out of range). All nodenums listed
in ignore_incoming will have packets they send droped on receive (by router.cpp) */
pb_size_t ignore_incoming_count;
uint32_t ignore_incoming[3];
} Config_LoRaConfig;
typedef struct _Config_BluetoothConfig {
/* Enable Bluetooth on the device */
bool enabled;
/* Determines the pairing strategy for the device */
Config_BluetoothConfig_PairingMode mode;
/* Specified pin for PairingMode.FixedPin */
uint32_t fixed_pin;
} Config_BluetoothConfig;
typedef struct _Config {
pb_size_t which_payload_variant;
union {
Config_DeviceConfig device;
Config_PositionConfig position;
Config_PowerConfig power;
Config_NetworkConfig network;
Config_DisplayConfig display;
Config_LoRaConfig lora;
Config_BluetoothConfig bluetooth;
} payload_variant;
} Config;
#ifdef __cplusplus
extern "C" {
#endif
/* Helper constants for enums */
#define _Config_DeviceConfig_Role_MIN Config_DeviceConfig_Role_CLIENT
#define _Config_DeviceConfig_Role_MAX Config_DeviceConfig_Role_ROUTER_CLIENT
#define _Config_DeviceConfig_Role_ARRAYSIZE ((Config_DeviceConfig_Role)(Config_DeviceConfig_Role_ROUTER_CLIENT+1))
#define _Config_PositionConfig_PositionFlags_MIN Config_PositionConfig_PositionFlags_UNSET
#define _Config_PositionConfig_PositionFlags_MAX Config_PositionConfig_PositionFlags_SPEED
#define _Config_PositionConfig_PositionFlags_ARRAYSIZE ((Config_PositionConfig_PositionFlags)(Config_PositionConfig_PositionFlags_SPEED+1))
#define _Config_NetworkConfig_AddressMode_MIN Config_NetworkConfig_AddressMode_DHCP
#define _Config_NetworkConfig_AddressMode_MAX Config_NetworkConfig_AddressMode_STATIC
#define _Config_NetworkConfig_AddressMode_ARRAYSIZE ((Config_NetworkConfig_AddressMode)(Config_NetworkConfig_AddressMode_STATIC+1))
#define _Config_DisplayConfig_GpsCoordinateFormat_MIN Config_DisplayConfig_GpsCoordinateFormat_DEC
#define _Config_DisplayConfig_GpsCoordinateFormat_MAX Config_DisplayConfig_GpsCoordinateFormat_OSGR
#define _Config_DisplayConfig_GpsCoordinateFormat_ARRAYSIZE ((Config_DisplayConfig_GpsCoordinateFormat)(Config_DisplayConfig_GpsCoordinateFormat_OSGR+1))
#define _Config_DisplayConfig_DisplayUnits_MIN Config_DisplayConfig_DisplayUnits_METRIC
#define _Config_DisplayConfig_DisplayUnits_MAX Config_DisplayConfig_DisplayUnits_IMPERIAL
#define _Config_DisplayConfig_DisplayUnits_ARRAYSIZE ((Config_DisplayConfig_DisplayUnits)(Config_DisplayConfig_DisplayUnits_IMPERIAL+1))
#define _Config_DisplayConfig_OledType_MIN Config_DisplayConfig_OledType_OLED_AUTO
#define _Config_DisplayConfig_OledType_MAX Config_DisplayConfig_OledType_OLED_SH1106
#define _Config_DisplayConfig_OledType_ARRAYSIZE ((Config_DisplayConfig_OledType)(Config_DisplayConfig_OledType_OLED_SH1106+1))
#define _Config_DisplayConfig_DisplayMode_MIN Config_DisplayConfig_DisplayMode_DEFAULT
#define _Config_DisplayConfig_DisplayMode_MAX Config_DisplayConfig_DisplayMode_COLOR
#define _Config_DisplayConfig_DisplayMode_ARRAYSIZE ((Config_DisplayConfig_DisplayMode)(Config_DisplayConfig_DisplayMode_COLOR+1))
#define _Config_LoRaConfig_RegionCode_MIN Config_LoRaConfig_RegionCode_UNSET
#define _Config_LoRaConfig_RegionCode_MAX Config_LoRaConfig_RegionCode_LORA_24
#define _Config_LoRaConfig_RegionCode_ARRAYSIZE ((Config_LoRaConfig_RegionCode)(Config_LoRaConfig_RegionCode_LORA_24+1))
#define _Config_LoRaConfig_ModemPreset_MIN Config_LoRaConfig_ModemPreset_LONG_FAST
#define _Config_LoRaConfig_ModemPreset_MAX Config_LoRaConfig_ModemPreset_SHORT_FAST
#define _Config_LoRaConfig_ModemPreset_ARRAYSIZE ((Config_LoRaConfig_ModemPreset)(Config_LoRaConfig_ModemPreset_SHORT_FAST+1))
#define _Config_BluetoothConfig_PairingMode_MIN Config_BluetoothConfig_PairingMode_RANDOM_PIN
#define _Config_BluetoothConfig_PairingMode_MAX Config_BluetoothConfig_PairingMode_NO_PIN
#define _Config_BluetoothConfig_PairingMode_ARRAYSIZE ((Config_BluetoothConfig_PairingMode)(Config_BluetoothConfig_PairingMode_NO_PIN+1))
#define Config_DeviceConfig_role_ENUMTYPE Config_DeviceConfig_Role
#define Config_NetworkConfig_address_mode_ENUMTYPE Config_NetworkConfig_AddressMode
#define Config_DisplayConfig_gps_format_ENUMTYPE Config_DisplayConfig_GpsCoordinateFormat
#define Config_DisplayConfig_units_ENUMTYPE Config_DisplayConfig_DisplayUnits
#define Config_DisplayConfig_oled_ENUMTYPE Config_DisplayConfig_OledType
#define Config_DisplayConfig_displaymode_ENUMTYPE Config_DisplayConfig_DisplayMode
#define Config_LoRaConfig_modem_preset_ENUMTYPE Config_LoRaConfig_ModemPreset
#define Config_LoRaConfig_region_ENUMTYPE Config_LoRaConfig_RegionCode
#define Config_BluetoothConfig_mode_ENUMTYPE Config_BluetoothConfig_PairingMode
/* Initializer values for message structs */
#define Config_init_default {0, {Config_DeviceConfig_init_default}}
#define Config_DeviceConfig_init_default {_Config_DeviceConfig_Role_MIN, 0, 0, 0, 0}
#define Config_PositionConfig_init_default {0, 0, 0, 0, 0, 0, 0, 0, 0}
#define Config_PowerConfig_init_default {0, 0, 0, 0, 0, 0, 0, 0}
#define Config_NetworkConfig_init_default {0, "", "", "", 0, _Config_NetworkConfig_AddressMode_MIN, false, Config_NetworkConfig_IpV4Config_init_default}
#define Config_NetworkConfig_IpV4Config_init_default {0, 0, 0, 0}
#define Config_DisplayConfig_init_default {0, _Config_DisplayConfig_GpsCoordinateFormat_MIN, 0, 0, 0, _Config_DisplayConfig_DisplayUnits_MIN, _Config_DisplayConfig_OledType_MIN, _Config_DisplayConfig_DisplayMode_MIN, 0}
#define Config_LoRaConfig_init_default {0, _Config_LoRaConfig_ModemPreset_MIN, 0, 0, 0, 0, _Config_LoRaConfig_RegionCode_MIN, 0, 0, 0, 0, 0, 0, {0, 0, 0}}
#define Config_BluetoothConfig_init_default {0, _Config_BluetoothConfig_PairingMode_MIN, 0}
#define Config_init_zero {0, {Config_DeviceConfig_init_zero}}
#define Config_DeviceConfig_init_zero {_Config_DeviceConfig_Role_MIN, 0, 0, 0, 0}
#define Config_PositionConfig_init_zero {0, 0, 0, 0, 0, 0, 0, 0, 0}
#define Config_PowerConfig_init_zero {0, 0, 0, 0, 0, 0, 0, 0}
#define Config_NetworkConfig_init_zero {0, "", "", "", 0, _Config_NetworkConfig_AddressMode_MIN, false, Config_NetworkConfig_IpV4Config_init_zero}
#define Config_NetworkConfig_IpV4Config_init_zero {0, 0, 0, 0}
#define Config_DisplayConfig_init_zero {0, _Config_DisplayConfig_GpsCoordinateFormat_MIN, 0, 0, 0, _Config_DisplayConfig_DisplayUnits_MIN, _Config_DisplayConfig_OledType_MIN, _Config_DisplayConfig_DisplayMode_MIN, 0}
#define Config_LoRaConfig_init_zero {0, _Config_LoRaConfig_ModemPreset_MIN, 0, 0, 0, 0, _Config_LoRaConfig_RegionCode_MIN, 0, 0, 0, 0, 0, 0, {0, 0, 0}}
#define Config_BluetoothConfig_init_zero {0, _Config_BluetoothConfig_PairingMode_MIN, 0}
/* Field tags (for use in manual encoding/decoding) */
#define Config_DeviceConfig_role_tag 1
#define Config_DeviceConfig_serial_enabled_tag 2
#define Config_DeviceConfig_debug_log_enabled_tag 3
#define Config_DeviceConfig_button_gpio_tag 4
#define Config_DeviceConfig_buzzer_gpio_tag 5
#define Config_PositionConfig_position_broadcast_secs_tag 1
#define Config_PositionConfig_position_broadcast_smart_enabled_tag 2
#define Config_PositionConfig_fixed_position_tag 3
#define Config_PositionConfig_gps_enabled_tag 4
#define Config_PositionConfig_gps_update_interval_tag 5
#define Config_PositionConfig_gps_attempt_time_tag 6
#define Config_PositionConfig_position_flags_tag 7
#define Config_PositionConfig_rx_gpio_tag 8
#define Config_PositionConfig_tx_gpio_tag 9
#define Config_PowerConfig_is_power_saving_tag 1
#define Config_PowerConfig_on_battery_shutdown_after_secs_tag 2
#define Config_PowerConfig_adc_multiplier_override_tag 3
#define Config_PowerConfig_wait_bluetooth_secs_tag 4
#define Config_PowerConfig_mesh_sds_timeout_secs_tag 5
#define Config_PowerConfig_sds_secs_tag 6
#define Config_PowerConfig_ls_secs_tag 7
#define Config_PowerConfig_min_wake_secs_tag 8
#define Config_NetworkConfig_IpV4Config_ip_tag 1
#define Config_NetworkConfig_IpV4Config_gateway_tag 2
#define Config_NetworkConfig_IpV4Config_subnet_tag 3
#define Config_NetworkConfig_IpV4Config_dns_tag 4
#define Config_NetworkConfig_wifi_enabled_tag 1
#define Config_NetworkConfig_wifi_ssid_tag 3
#define Config_NetworkConfig_wifi_psk_tag 4
#define Config_NetworkConfig_ntp_server_tag 5
#define Config_NetworkConfig_eth_enabled_tag 6
#define Config_NetworkConfig_address_mode_tag 7
#define Config_NetworkConfig_ipv4_config_tag 8
#define Config_DisplayConfig_screen_on_secs_tag 1
#define Config_DisplayConfig_gps_format_tag 2
#define Config_DisplayConfig_auto_screen_carousel_secs_tag 3
#define Config_DisplayConfig_compass_north_top_tag 4
#define Config_DisplayConfig_flip_screen_tag 5
#define Config_DisplayConfig_units_tag 6
#define Config_DisplayConfig_oled_tag 7
#define Config_DisplayConfig_displaymode_tag 8
#define Config_DisplayConfig_heading_bold_tag 9
#define Config_LoRaConfig_use_preset_tag 1
#define Config_LoRaConfig_modem_preset_tag 2
#define Config_LoRaConfig_bandwidth_tag 3
#define Config_LoRaConfig_spread_factor_tag 4
#define Config_LoRaConfig_coding_rate_tag 5
#define Config_LoRaConfig_frequency_offset_tag 6
#define Config_LoRaConfig_region_tag 7
#define Config_LoRaConfig_hop_limit_tag 8
#define Config_LoRaConfig_tx_enabled_tag 9
#define Config_LoRaConfig_tx_power_tag 10
#define Config_LoRaConfig_channel_num_tag 11
#define Config_LoRaConfig_override_duty_cycle_tag 12
#define Config_LoRaConfig_ignore_incoming_tag 103
#define Config_BluetoothConfig_enabled_tag 1
#define Config_BluetoothConfig_mode_tag 2
#define Config_BluetoothConfig_fixed_pin_tag 3
#define Config_device_tag 1
#define Config_position_tag 2
#define Config_power_tag 3
#define Config_network_tag 4
#define Config_display_tag 5
#define Config_lora_tag 6
#define Config_bluetooth_tag 7
/* Struct field encoding specification for nanopb */
#define Config_FIELDLIST(X, a) \
X(a, STATIC, ONEOF, MESSAGE, (payload_variant,device,payload_variant.device), 1) \
X(a, STATIC, ONEOF, MESSAGE, (payload_variant,position,payload_variant.position), 2) \
X(a, STATIC, ONEOF, MESSAGE, (payload_variant,power,payload_variant.power), 3) \
X(a, STATIC, ONEOF, MESSAGE, (payload_variant,network,payload_variant.network), 4) \
X(a, STATIC, ONEOF, MESSAGE, (payload_variant,display,payload_variant.display), 5) \
X(a, STATIC, ONEOF, MESSAGE, (payload_variant,lora,payload_variant.lora), 6) \
X(a, STATIC, ONEOF, MESSAGE, (payload_variant,bluetooth,payload_variant.bluetooth), 7)
#define Config_CALLBACK NULL
#define Config_DEFAULT NULL
#define Config_payload_variant_device_MSGTYPE Config_DeviceConfig
#define Config_payload_variant_position_MSGTYPE Config_PositionConfig
#define Config_payload_variant_power_MSGTYPE Config_PowerConfig
#define Config_payload_variant_network_MSGTYPE Config_NetworkConfig
#define Config_payload_variant_display_MSGTYPE Config_DisplayConfig
#define Config_payload_variant_lora_MSGTYPE Config_LoRaConfig
#define Config_payload_variant_bluetooth_MSGTYPE Config_BluetoothConfig
#define Config_DeviceConfig_FIELDLIST(X, a) \
X(a, STATIC, SINGULAR, UENUM, role, 1) \
X(a, STATIC, SINGULAR, BOOL, serial_enabled, 2) \
X(a, STATIC, SINGULAR, BOOL, debug_log_enabled, 3) \
X(a, STATIC, SINGULAR, UINT32, button_gpio, 4) \
X(a, STATIC, SINGULAR, UINT32, buzzer_gpio, 5)
#define Config_DeviceConfig_CALLBACK NULL
#define Config_DeviceConfig_DEFAULT NULL
#define Config_PositionConfig_FIELDLIST(X, a) \
X(a, STATIC, SINGULAR, UINT32, position_broadcast_secs, 1) \
X(a, STATIC, SINGULAR, BOOL, position_broadcast_smart_enabled, 2) \
X(a, STATIC, SINGULAR, BOOL, fixed_position, 3) \
X(a, STATIC, SINGULAR, BOOL, gps_enabled, 4) \
X(a, STATIC, SINGULAR, UINT32, gps_update_interval, 5) \
X(a, STATIC, SINGULAR, UINT32, gps_attempt_time, 6) \
X(a, STATIC, SINGULAR, UINT32, position_flags, 7) \
X(a, STATIC, SINGULAR, UINT32, rx_gpio, 8) \
X(a, STATIC, SINGULAR, UINT32, tx_gpio, 9)
#define Config_PositionConfig_CALLBACK NULL
#define Config_PositionConfig_DEFAULT NULL
#define Config_PowerConfig_FIELDLIST(X, a) \
X(a, STATIC, SINGULAR, BOOL, is_power_saving, 1) \
X(a, STATIC, SINGULAR, UINT32, on_battery_shutdown_after_secs, 2) \
X(a, STATIC, SINGULAR, FLOAT, adc_multiplier_override, 3) \
X(a, STATIC, SINGULAR, UINT32, wait_bluetooth_secs, 4) \
X(a, STATIC, SINGULAR, UINT32, mesh_sds_timeout_secs, 5) \
X(a, STATIC, SINGULAR, UINT32, sds_secs, 6) \
X(a, STATIC, SINGULAR, UINT32, ls_secs, 7) \
X(a, STATIC, SINGULAR, UINT32, min_wake_secs, 8)
#define Config_PowerConfig_CALLBACK NULL
#define Config_PowerConfig_DEFAULT NULL
#define Config_NetworkConfig_FIELDLIST(X, a) \
X(a, STATIC, SINGULAR, BOOL, wifi_enabled, 1) \
X(a, STATIC, SINGULAR, STRING, wifi_ssid, 3) \
X(a, STATIC, SINGULAR, STRING, wifi_psk, 4) \
X(a, STATIC, SINGULAR, STRING, ntp_server, 5) \
X(a, STATIC, SINGULAR, BOOL, eth_enabled, 6) \
X(a, STATIC, SINGULAR, UENUM, address_mode, 7) \
X(a, STATIC, OPTIONAL, MESSAGE, ipv4_config, 8)
#define Config_NetworkConfig_CALLBACK NULL
#define Config_NetworkConfig_DEFAULT NULL
#define Config_NetworkConfig_ipv4_config_MSGTYPE Config_NetworkConfig_IpV4Config
#define Config_NetworkConfig_IpV4Config_FIELDLIST(X, a) \
X(a, STATIC, SINGULAR, FIXED32, ip, 1) \
X(a, STATIC, SINGULAR, FIXED32, gateway, 2) \
X(a, STATIC, SINGULAR, FIXED32, subnet, 3) \
X(a, STATIC, SINGULAR, FIXED32, dns, 4)
#define Config_NetworkConfig_IpV4Config_CALLBACK NULL
#define Config_NetworkConfig_IpV4Config_DEFAULT NULL
#define Config_DisplayConfig_FIELDLIST(X, a) \
X(a, STATIC, SINGULAR, UINT32, screen_on_secs, 1) \
X(a, STATIC, SINGULAR, UENUM, gps_format, 2) \
X(a, STATIC, SINGULAR, UINT32, auto_screen_carousel_secs, 3) \
X(a, STATIC, SINGULAR, BOOL, compass_north_top, 4) \
X(a, STATIC, SINGULAR, BOOL, flip_screen, 5) \
X(a, STATIC, SINGULAR, UENUM, units, 6) \
X(a, STATIC, SINGULAR, UENUM, oled, 7) \
X(a, STATIC, SINGULAR, UENUM, displaymode, 8) \
X(a, STATIC, SINGULAR, BOOL, heading_bold, 9)
#define Config_DisplayConfig_CALLBACK NULL
#define Config_DisplayConfig_DEFAULT NULL
#define Config_LoRaConfig_FIELDLIST(X, a) \
X(a, STATIC, SINGULAR, BOOL, use_preset, 1) \
X(a, STATIC, SINGULAR, UENUM, modem_preset, 2) \
X(a, STATIC, SINGULAR, UINT32, bandwidth, 3) \
X(a, STATIC, SINGULAR, UINT32, spread_factor, 4) \
X(a, STATIC, SINGULAR, UINT32, coding_rate, 5) \
X(a, STATIC, SINGULAR, FLOAT, frequency_offset, 6) \
X(a, STATIC, SINGULAR, UENUM, region, 7) \
X(a, STATIC, SINGULAR, UINT32, hop_limit, 8) \
X(a, STATIC, SINGULAR, BOOL, tx_enabled, 9) \
X(a, STATIC, SINGULAR, INT32, tx_power, 10) \
X(a, STATIC, SINGULAR, UINT32, channel_num, 11) \
X(a, STATIC, SINGULAR, BOOL, override_duty_cycle, 12) \
X(a, STATIC, REPEATED, UINT32, ignore_incoming, 103)
#define Config_LoRaConfig_CALLBACK NULL
#define Config_LoRaConfig_DEFAULT NULL
#define Config_BluetoothConfig_FIELDLIST(X, a) \
X(a, STATIC, SINGULAR, BOOL, enabled, 1) \
X(a, STATIC, SINGULAR, UENUM, mode, 2) \
X(a, STATIC, SINGULAR, UINT32, fixed_pin, 3)
#define Config_BluetoothConfig_CALLBACK NULL
#define Config_BluetoothConfig_DEFAULT NULL
extern const pb_msgdesc_t Config_msg;
extern const pb_msgdesc_t Config_DeviceConfig_msg;
extern const pb_msgdesc_t Config_PositionConfig_msg;
extern const pb_msgdesc_t Config_PowerConfig_msg;
extern const pb_msgdesc_t Config_NetworkConfig_msg;
extern const pb_msgdesc_t Config_NetworkConfig_IpV4Config_msg;
extern const pb_msgdesc_t Config_DisplayConfig_msg;
extern const pb_msgdesc_t Config_LoRaConfig_msg;
extern const pb_msgdesc_t Config_BluetoothConfig_msg;
/* Defines for backwards compatibility with code written before nanopb-0.4.0 */
#define Config_fields &Config_msg
#define Config_DeviceConfig_fields &Config_DeviceConfig_msg
#define Config_PositionConfig_fields &Config_PositionConfig_msg
#define Config_PowerConfig_fields &Config_PowerConfig_msg
#define Config_NetworkConfig_fields &Config_NetworkConfig_msg
#define Config_NetworkConfig_IpV4Config_fields &Config_NetworkConfig_IpV4Config_msg
#define Config_DisplayConfig_fields &Config_DisplayConfig_msg
#define Config_LoRaConfig_fields &Config_LoRaConfig_msg
#define Config_BluetoothConfig_fields &Config_BluetoothConfig_msg
/* Maximum encoded size of messages (where known) */
#define Config_BluetoothConfig_size 10
#define Config_DeviceConfig_size 18
#define Config_DisplayConfig_size 26
#define Config_LoRaConfig_size 70
#define Config_NetworkConfig_IpV4Config_size 20
#define Config_NetworkConfig_size 161
#define Config_PositionConfig_size 42
#define Config_PowerConfig_size 43
#define Config_size 164
#ifdef __cplusplus
} /* extern "C" */
#endif
#endif
Reference in New Issue View Git Blame Copy Permalink