mirror of
https://github.com/meshtastic/firmware.git
synced 2025-10-28 23:34:03 +00:00
88655ffc44
* Move bluetooth to system menu and add confirmation for canned messages * Cruft * Handle else * Warn * Fixed screen reset
189 lines
7.6 KiB
C
189 lines
7.6 KiB
C
#ifndef _SEEED_TRACKER_L1_H_
|
|
#define _SEEED_TRACKER_L1_H_
|
|
#include "WVariant.h"
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// Clock Configuration
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
#define VARIANT_MCK (64000000ul) // Master clock frequency
|
|
#define USE_LFXO // 32.768kHz crystal for LFCLK
|
|
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// Pin Capacity Definitions
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
#define PINS_COUNT (33u) // Total GPIO pins
|
|
#define NUM_DIGITAL_PINS (33u) // Digital I/O pins
|
|
#define NUM_ANALOG_INPUTS (8u) // Analog inputs (A0-A5 + VBAT + AREF)
|
|
#define NUM_ANALOG_OUTPUTS (0u)
|
|
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// LED Configuration
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// LEDs
|
|
// LEDs
|
|
#define PIN_LED1 (11) // LED P1.15
|
|
#define PIN_LED2 (12) //
|
|
|
|
#define LED_BUILTIN PIN_LED1
|
|
#define LED_CONN PIN_LED2
|
|
|
|
#define LED_GREEN PIN_LED1
|
|
#define LED_BLUE PIN_LED2
|
|
// #define LED_PIN PIN_LED2
|
|
#define LED_STATE_ON 1 // State when LED is litted
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// Button Configuration
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
#define CANCEL_BUTTON_PIN D13 // This is the Program Button
|
|
// #define BUTTON_NEED_PULLUP 1
|
|
#define CANCEL_BUTTON_ACTIVE_LOW true
|
|
#define CANCEL_BUTTON_ACTIVE_PULLUP false
|
|
|
|
// #define BUTTON_PIN_TOUCH 13 // Touch button
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// Digital Pin Mapping (D0-D10)
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
#define D0 0 // P1.06 GNSS_WAKEUP/IO0
|
|
#define D1 1 // P0.07 LORA_DIO1
|
|
#define D2 2 // P1.07 LORA_RESET
|
|
#define D3 3 // P1.10 LORA_BUSY
|
|
#define D4 4 // P1.14 LORA_CS
|
|
#define D5 5 // P1.08 LORA_SW
|
|
#define D6 6 // P0.27 GNSS_TX
|
|
#define D7 7 // P0.26 GNSS_RX
|
|
#define D8 8 // P0.30 SPI_SCK
|
|
#define D9 9 // P0.03 SPI_MISO
|
|
#define D10 10 // P0.28 SPI_MOSI
|
|
#define D12 12 // P1.00 Buzzer
|
|
#define D13 13 // P0.08 User Button
|
|
#define D14 14 // P0.05 OLED SCL
|
|
#define D15 15 // P0.06 OLED SDA
|
|
#define D16 16 // P0.31 VBAT_ADC
|
|
#define D17 17 // P0.00 GROVE SDA
|
|
#define D18 18 // P0.01 GROVE_SCL
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// Analog Pin Definitions
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
#define PIN_A0 0 // P0.02 Analog Input 0
|
|
#define PIN_A1 1 // P0.03 Analog Input 1
|
|
#define PIN_A2 2 // P0.28 Analog Input 2
|
|
#define PIN_A3 3 // P0.29 Analog Input 3
|
|
#define PIN_A4 4 // P0.04 Analog Input 4
|
|
#define PIN_A5 5 // P0.05 Analog Input 5
|
|
#define PIN_VBAT D16 // P0.31 Battery voltage sense
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// Communication Interfaces
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// I2C Configuration
|
|
// #define HAS_WIRE 1
|
|
#define PIN_WIRE_SDA D14 // P0.09
|
|
#define PIN_WIRE_SCL D15 // P0.10
|
|
#define WIRE_INTERFACES_COUNT 2
|
|
#define PIN_WIRE1_SDA D18
|
|
#define PIN_WIRE1_SCL D17
|
|
#define I2C_NO_RESCAN
|
|
|
|
static const uint8_t SDA = PIN_WIRE_SDA;
|
|
static const uint8_t SCL = PIN_WIRE_SCL;
|
|
|
|
#define HAS_SCREEN 1
|
|
#define USE_SSD1306 1
|
|
|
|
// SPI Configuration (SX1262)
|
|
|
|
#define SPI_INTERFACES_COUNT 1
|
|
#define PIN_SPI_MISO 9 // P0.03 (D9)
|
|
#define PIN_SPI_MOSI 10 // P0.28 (D10)
|
|
#define PIN_SPI_SCK 8 // P0.30 (D8)
|
|
|
|
// SX1262 LoRa Module Pins
|
|
#define USE_SX1262
|
|
#define SX126X_CS D4 // Chip select
|
|
#define SX126X_DIO1 D1 // Digital IO 1 (Interrupt)
|
|
#define SX126X_BUSY D3 // Busy status
|
|
#define SX126X_RESET D2 // Reset control
|
|
#define SX126X_DIO3_TCXO_VOLTAGE 1.8 // TCXO supply voltage
|
|
#define SX126X_RXEN D5 // RX enable control
|
|
#define SX126X_TXEN RADIOLIB_NC
|
|
#define SX126X_DIO2_AS_RF_SWITCH // This Line is really necessary for SX1262 to work with RF switch or will loss TX power
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// Power Management
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
|
|
#define BAT_READ 30 // D30 = P0.04 Reads battery voltage from divider on signal board.
|
|
#define BATTERY_SENSE_RESOLUTION_BITS 12
|
|
#define ADC_MULTIPLIER 2.0
|
|
#define BATTERY_PIN PIN_VBAT // PIN_A7
|
|
#define AREF_VOLTAGE 3.6
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// GPS L76KB
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
#define GPS_L76K
|
|
#ifdef GPS_L76K
|
|
#define PIN_GPS_RX D6 // P0.26
|
|
#define PIN_GPS_TX D7
|
|
#define HAS_GPS 1
|
|
#define GPS_BAUDRATE 9600
|
|
#define GPS_THREAD_INTERVAL 50
|
|
#define PIN_SERIAL1_RX PIN_GPS_TX
|
|
#define PIN_SERIAL1_TX PIN_GPS_RX
|
|
|
|
#define GPS_RX_PIN PIN_GPS_TX
|
|
#define GPS_TX_PIN PIN_GPS_RX
|
|
#define PIN_GPS_STANDBY D0
|
|
|
|
// #define GPS_DEBUG
|
|
// #define GPS_EN D18 // P1.05
|
|
#endif
|
|
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// On-board QSPI Flash
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// On-board QSPI Flash
|
|
#define PIN_QSPI_SCK (21)
|
|
#define PIN_QSPI_CS (22)
|
|
#define PIN_QSPI_IO0 (23)
|
|
#define PIN_QSPI_IO1 (24)
|
|
#define PIN_QSPI_IO2 (25)
|
|
#define PIN_QSPI_IO3 (26)
|
|
|
|
#define EXTERNAL_FLASH_DEVICES P25Q16H
|
|
#define EXTERNAL_FLASH_USE_QSPI
|
|
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// Buzzer
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// Buzzer
|
|
|
|
#define PIN_BUZZER D12 // P1.00, pwm output
|
|
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// joystick
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
|
|
#define CANNED_MESSAGE_MODULE_ENABLE 1
|
|
|
|
#define CANNED_MESSAGE_ADD_CONFIRMATION 1
|
|
|
|
// trackball
|
|
#define HAS_TRACKBALL 1
|
|
#define TB_UP 25
|
|
#define TB_DOWN 26
|
|
#define TB_LEFT 27
|
|
#define TB_RIGHT 28
|
|
#define TB_PRESS 29
|
|
#define TB_DIRECTION FALLING
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// Compatibility Definitions
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
// Serial port placeholders
|
|
|
|
#define PIN_SERIAL2_RX (-1)
|
|
#define PIN_SERIAL2_TX (-1)
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif // _SEEED_SOLAR_NODE_H_
|