GUVWAF 95bbcd2cb7 Use LORA_DIO1 as RadioLib GPIO for SX127x chips (#2290) ... * When channel is active, first try receiving that packet Afterwards we'll try transmitting again * Remove setStandby in startSend Already done in isChannelActive() * Set LORA_DIO1 as RadioLib GPIO for SX127x * LORA_DIO1 for Heltec v1, overlaps with GPS_TX Set to RADIOLIB_NC for now * If receive was not successful, startReceive doesn't trigger the interrupt So we have to go back to transmitting anyway --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>		2023-02-20 07:40:44 -06:00
..
betafpv_2400_tx_micro	label boards as secondary to split the core firmware archive by support level.	2023-02-10 01:35:25 +01:00
diy	label boards as secondary to split the core firmware archive by support level.	2023-02-10 01:35:25 +01:00
Dongle_nRF52840-pca10059-v1	label boards as secondary to split the core firmware archive by support level.	2023-02-10 01:35:25 +01:00
feather_diy	label boards as secondary to split the core firmware archive by support level.	2023-02-10 01:35:25 +01:00
heltec_v1	Use LORA_DIO1 as RadioLib GPIO for SX127x chips (#2290)	2023-02-20 07:40:44 -06:00
heltec_v2	Use LORA_DIO1 as RadioLib GPIO for SX127x chips (#2290)	2023-02-20 07:40:44 -06:00
heltec_v2.1	Use LORA_DIO1 as RadioLib GPIO for SX127x chips (#2290)	2023-02-20 07:40:44 -06:00
heltec_v3	trunk roundhouse kick	2023-01-21 21:23:24 +01:00
heltec_wsl_v3	trunk roundhouse kick	2023-01-21 21:23:24 +01:00
lora_isp4520	label boards as secondary to split the core firmware archive by support level.	2023-02-10 01:35:25 +01:00
lora_relay_v1	label boards as secondary to split the core firmware archive by support level.	2023-02-10 01:35:25 +01:00
lora_relay_v2	label boards as secondary to split the core firmware archive by support level.	2023-02-10 01:35:25 +01:00
m5stack_core	label boards as secondary to split the core firmware archive by support level.	2023-02-10 01:35:25 +01:00
m5stack_coreink	label boards as secondary to split the core firmware archive by support level.	2023-02-10 01:35:25 +01:00
nano-g1	trunk roundhouse kick	2023-01-21 21:23:24 +01:00
nano-g1-explorer	'nano-g1-explorer'	2023-02-18 04:49:37 +08:00
pca10056-rc-clock	label boards as secondary to split the core firmware archive by support level.	2023-02-10 01:35:25 +01:00
portduino	Portduino isn't extra. It's extra special	2023-02-10 07:47:43 -06:00
ppr	label boards as secondary to split the core firmware archive by support level.	2023-02-10 01:35:25 +01:00
ppr1	label boards as secondary to split the core firmware archive by support level.	2023-02-10 01:35:25 +01:00
rak4631	For science!	2023-01-25 10:10:09 -06:00
rak4631_epaper	Add to Eink target as well	2023-01-25 11:48:11 -06:00
rak11200	label boards as secondary to split the core firmware archive by support level.	2023-02-10 01:35:25 +01:00
rpipico	label boards as secondary to split the core firmware archive by support level.	2023-02-10 01:35:25 +01:00
rpipicow	label boards as secondary to split the core firmware archive by support level.	2023-02-10 01:35:25 +01:00
station-g1	trunk roundhouse kick	2023-01-21 21:23:24 +01:00
t-echo	trunk roundhouse kick	2023-01-21 21:23:24 +01:00
tbeam	trunk roundhouse kick	2023-01-21 21:23:24 +01:00
tbeam_v07	Use LORA_DIO1 as RadioLib GPIO for SX127x chips (#2290)	2023-02-20 07:40:44 -06:00
tbeam-s3-core	trunk roundhouse kick	2023-01-21 21:23:24 +01:00
tlora_t3s3_v1	trunk roundhouse kick	2023-01-21 21:23:24 +01:00
tlora_v1	Use LORA_DIO1 as RadioLib GPIO for SX127x chips (#2290)	2023-02-20 07:40:44 -06:00
tlora_v1_3	Use LORA_DIO1 as RadioLib GPIO for SX127x chips (#2290)	2023-02-20 07:40:44 -06:00
tlora_v2	Use LORA_DIO1 as RadioLib GPIO for SX127x chips (#2290)	2023-02-20 07:40:44 -06:00
tlora_v2_1_16	Use LORA_DIO1 as RadioLib GPIO for SX127x chips (#2290)	2023-02-20 07:40:44 -06:00
tlora_v2_1_18	trunk roundhouse kick	2023-01-21 21:23:24 +01:00
wio-e5	label boards as secondary to split the core firmware archive by support level.	2023-02-10 01:35:25 +01:00