mirror of
https://github.com/meshtastic/firmware.git
synced 2025-02-01 10:19:59 +00:00
3fa8b357e5
* Fix for serial monitoring and I2C for Vision Master e213 (#4280) * Fix for serial monitoring and I2C The board did not allow serial monitoring while on boot mode, i was able to fix this by adding a board variant. I also corrected the i2c pins. I was able to test it with a cardkb * oops I delete some code by mistake, all back now * Made some adjustments * Minimize the diff --------- Co-authored-by: Todd Herbert <herbert.todd@gmail.com> * Don't redefine board identifier Suppresses compiler warnings * Detect Vision Master 213 with PIO serial monitor * Use outermost button as user-button Less chance of accidentally hitting reset * Use 1200bps touch (213) Allows upload without manually entering bootloader --------- Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
43 lines
1.0 KiB
JSON
43 lines
1.0 KiB
JSON
{
|
|
"build": {
|
|
"arduino": {
|
|
"ldscript": "esp32s3_out.ld",
|
|
"partitions": "default_8MB.csv"
|
|
},
|
|
"core": "esp32",
|
|
"extra_flags": [
|
|
"-DBOARD_HAS_PSRAM",
|
|
"-DARDUINO_USB_CDC_ON_BOOT=1",
|
|
"-DARDUINO_USB_MODE=0",
|
|
"-DARDUINO_RUNNING_CORE=1",
|
|
"-DARDUINO_EVENT_RUNNING_CORE=1"
|
|
],
|
|
"f_cpu": "240000000L",
|
|
"f_flash": "80000000L",
|
|
"flash_mode": "qio",
|
|
"hwids": [
|
|
["0x303A", "0x1001"],
|
|
["0x303A", "0x0002"]
|
|
],
|
|
"mcu": "esp32s3",
|
|
"variant": "heltec_vision_master_e213"
|
|
},
|
|
"connectivity": ["wifi", "bluetooth", "lora"],
|
|
"debug": {
|
|
"openocd_target": "esp32s3.cfg"
|
|
},
|
|
"frameworks": ["arduino", "espidf"],
|
|
"name": "Heltec Vision Master E213",
|
|
"upload": {
|
|
"flash_size": "8MB",
|
|
"maximum_ram_size": 327680,
|
|
"maximum_size": 8388608,
|
|
"use_1200bps_touch": true,
|
|
"wait_for_upload_port": true,
|
|
"require_upload_port": true,
|
|
"speed": 921600
|
|
},
|
|
"url": "https://heltec.org/project/vision-master-e213/",
|
|
"vendor": "Heltec"
|
|
}
|