mirror of
https://github.com/meshtastic/firmware.git
synced 2025-10-28 23:34:03 +00:00
126 lines
3.3 KiB
C
126 lines
3.3 KiB
C
/*
|
|
Initial settings and work by https://github.com/gjelsoe
|
|
Unit provided by Radio Master RC
|
|
https://radiomasterrc.com/products/bandit-expresslrs-rf-module with 1.29" OLED display CH1115 driver
|
|
*/
|
|
|
|
/*
|
|
On this model then screen is NOT upside down, don't flip it for the user.
|
|
*/
|
|
#undef DISPLAY_FLIP_SCREEN
|
|
|
|
/*
|
|
I2C SDA and SCL.
|
|
0x18 - STK8XXX Accelerometer
|
|
0x3C - SH1115 Display Driver
|
|
*/
|
|
#define I2C_SDA 14
|
|
#define I2C_SCL 12
|
|
|
|
/*
|
|
I2C STK8XXX Accelerometer Interrupt PIN to ESP32 Pin 6 - SENSOR_CAPP (GPIO37)
|
|
*/
|
|
#define STK8XXX_INT 37
|
|
|
|
/*
|
|
No GPS - but free pins are available.
|
|
*/
|
|
#define HAS_GPS 0
|
|
#undef GPS_RX_PIN
|
|
#undef GPS_TX_PIN
|
|
|
|
/*
|
|
Pin connections from ESP32-D0WDQ6 to SX1276.
|
|
*/
|
|
#define LORA_DIO0 22
|
|
#define LORA_DIO1 21
|
|
#define LORA_SCK 18
|
|
#define LORA_MISO 19
|
|
#define LORA_MOSI 23
|
|
#define LORA_CS 4
|
|
#define LORA_RESET 5
|
|
#define LORA_TXEN 33
|
|
|
|
/*
|
|
This unit has a FAN built-in.
|
|
FAN is active at 250mW on it's ExpressLRS Firmware.
|
|
This FAN has TACHO signal on Pin 27 for use with PWM.
|
|
*/
|
|
#define RF95_FAN_EN 2
|
|
|
|
/*
|
|
LED PIN setup and it has a NeoPixel LED.
|
|
It's possible to setup colors for Button 1 and 2,
|
|
look at BUTTON1_COLOR, BUTTON1_COLOR_INDEX, BUTTON2_COLOR and BUTTON2_COLOR_INDEX
|
|
this is done here for now.
|
|
*/
|
|
#define HAS_NEOPIXEL // Enable the use of neopixels
|
|
#define NEOPIXEL_COUNT 6 // How many neopixels are connected
|
|
#define NEOPIXEL_DATA 15 // GPIO pin used to send data to the neopixels
|
|
#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // Type of neopixels in use
|
|
#define ENABLE_AMBIENTLIGHTING // Turn on Ambient Lighting
|
|
// #define BUTTON1_COLOR 0xFF0000 // Background light for Button 1 in HEX RGB Color (RadioMaster Bandit only).
|
|
// #define BUTTON1_COLOR_INDEX 0 // NeoPixel Index ID for Button 1
|
|
// #define BUTTON2_COLOR 0x0000FF // Background light for Button 2 in HEX RGB Color (RadioMaster Bandit only).
|
|
// #define BUTTON2_COLOR_INDEX 1 // NeoPixel Index ID for Button 2
|
|
|
|
/*
|
|
It has 1 x five-way and 2 x normal buttons.
|
|
|
|
Button GPIO RGB Index
|
|
---------------------------
|
|
Five-way 39 -
|
|
Button 1 34 0
|
|
Button 2 35 1
|
|
|
|
Five way button when using ADC.
|
|
2.632V, 2.177V, 1.598V, 1.055V, 0V
|
|
|
|
ADC Values:
|
|
{ UP, DOWN, LEFT, RIGHT, ENTER, IDLE }
|
|
3227, 0 ,1961, 2668, 1290, 4095
|
|
|
|
Five way button when using ADC.
|
|
https://github.com/ExpressLRS/targets/blob/f3215b5ec891108db1a13523e4163950cfcadaac/TX/Radiomaster%20Bandit.json#L41
|
|
|
|
*/
|
|
#define INPUTBROKER_EXPRESSLRSFIVEWAY_TYPE
|
|
#define PIN_JOYSTICK 39
|
|
#define JOYSTICK_ADC_VALS /*UP*/ 3227, /*DOWN*/ 0, /*LEFT*/ 1961, /*RIGHT*/ 2668, /*OK*/ 1290, /*IDLE*/ 4095
|
|
|
|
/*
|
|
Normal Button Pin setup.
|
|
*/
|
|
#define BUTTON_PIN 34
|
|
#define BUTTON_NEED_PULLUP
|
|
|
|
/*
|
|
No External notification.
|
|
*/
|
|
#undef EXT_NOTIFY_OUT
|
|
|
|
/*
|
|
Remapping PIN Names.
|
|
Note, that this unit uses RFO
|
|
*/
|
|
#define USE_RF95
|
|
#define USE_RF95_RFO
|
|
#define RF95_CS LORA_CS
|
|
#define RF95_DIO1 LORA_DIO1
|
|
#define RF95_TXEN LORA_TXEN
|
|
#define RF95_RESET LORA_RESET
|
|
#define RF95_MAX_POWER 10
|
|
|
|
/*
|
|
This module has Skyworks SKY66122 controlled by dacWrite
|
|
power ranging from 100mW to 1000mW.
|
|
|
|
Mapping of PA_LEVEL to Power output: GPIO26/dacWrite
|
|
168 -> 100mW
|
|
155 -> 250mW
|
|
142 -> 500mW
|
|
110 -> 1000mW
|
|
*/
|
|
#define RF95_PA_EN 26
|
|
#define RF95_PA_DAC_EN
|
|
#define RF95_PA_LEVEL 110 |