mirror of
https://github.com/meshtastic/firmware.git
synced 2025-02-01 18:29:56 +00:00
207 lines
6.2 KiB
C
207 lines
6.2 KiB
C
/*
|
|
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
|
Copyright (c) 2016 Sandeep Mistry All right reserved.
|
|
Copyright (c) 2018, Adafruit Industries (adafruit.com)
|
|
|
|
This library is free software; you can redistribute it and/or
|
|
modify it under the terms of the GNU Lesser General Public
|
|
License as published by the Free Software Foundation; either
|
|
version 2.1 of the License, or (at your option) any later version.
|
|
This library is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
|
See the GNU Lesser General Public License for more details.
|
|
You should have received a copy of the GNU Lesser General Public
|
|
License along with this library; if not, write to the Free Software
|
|
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
#ifndef _VARIANT_HELTEC_NRF_
|
|
#define _VARIANT_HELTEC_NRF_
|
|
/** Master clock frequency */
|
|
#define VARIANT_MCK (64000000ul)
|
|
|
|
#define USE_LFXO // Board uses 32khz crystal for LF
|
|
|
|
/*----------------------------------------------------------------------------
|
|
* Headers
|
|
*----------------------------------------------------------------------------*/
|
|
|
|
#include "WVariant.h"
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif // __cplusplus
|
|
|
|
#define HELTEC_MESH_NODE_T114
|
|
|
|
#define USE_ST7789
|
|
|
|
#define ST7789_NSS 11
|
|
#define ST7789_RS 12 // DC
|
|
#define ST7789_SDA 41 // MOSI
|
|
#define ST7789_SCK 40
|
|
#define ST7789_RESET 2
|
|
#define ST7789_MISO -1
|
|
#define ST7789_BUSY -1
|
|
#define VTFT_CTRL 3
|
|
#define VTFT_LEDA 15
|
|
// #define ST7789_BL (32+6)
|
|
#define TFT_BACKLIGHT_ON LOW
|
|
#define ST7789_SPI_HOST SPI1_HOST
|
|
// #define TFT_BL (32+6)
|
|
#define SPI_FREQUENCY 40000000
|
|
#define SPI_READ_FREQUENCY 16000000
|
|
#define TFT_HEIGHT 135
|
|
#define TFT_WIDTH 240
|
|
#define TFT_OFFSET_X 0
|
|
#define TFT_OFFSET_Y 0
|
|
// #define TFT_OFFSET_ROTATION 0
|
|
// #define SCREEN_ROTATE
|
|
// #define SCREEN_TRANSITION_FRAMERATE 5
|
|
|
|
// Number of pins defined in PinDescription array
|
|
#define PINS_COUNT (48)
|
|
#define NUM_DIGITAL_PINS (48)
|
|
#define NUM_ANALOG_INPUTS (1)
|
|
#define NUM_ANALOG_OUTPUTS (0)
|
|
|
|
// LEDs
|
|
#define PIN_LED1 (32 + 3) // green (confirmed on 1.0 board)
|
|
#define LED_BLUE PIN_LED1 // fake for bluefruit library
|
|
#define LED_GREEN PIN_LED1
|
|
#define LED_BUILTIN LED_GREEN
|
|
#define LED_STATE_ON 0 // State when LED is lit
|
|
|
|
#define HAS_NEOPIXEL // Enable the use of neopixels
|
|
#define NEOPIXEL_COUNT 2 // How many neopixels are connected
|
|
#define NEOPIXEL_DATA 14 // gpio pin used to send data to the neopixels
|
|
#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
|
|
|
|
/*
|
|
* Buttons
|
|
*/
|
|
#define PIN_BUTTON1 (32 + 10)
|
|
// #define PIN_BUTTON2 (0 + 18) // 0.18 is labeled on the board as RESET but we configure it in the bootloader as a regular
|
|
// GPIO
|
|
|
|
/*
|
|
No longer populated on PCB
|
|
*/
|
|
#define PIN_SERIAL2_RX (0 + 9)
|
|
#define PIN_SERIAL2_TX (0 + 10)
|
|
// #define PIN_SERIAL2_EN (0 + 17)
|
|
|
|
/**
|
|
Wire Interfaces
|
|
*/
|
|
#define WIRE_INTERFACES_COUNT 1
|
|
|
|
#define PIN_WIRE_SDA (26)
|
|
#define PIN_WIRE_SCL (27)
|
|
|
|
// QSPI Pins
|
|
#define PIN_QSPI_SCK (32 + 14)
|
|
#define PIN_QSPI_CS (32 + 15)
|
|
#define PIN_QSPI_IO0 (32 + 12) // MOSI if using two bit interface
|
|
#define PIN_QSPI_IO1 (32 + 13) // MISO if using two bit interface
|
|
#define PIN_QSPI_IO2 (0 + 7) // WP if using two bit interface (i.e. not used)
|
|
#define PIN_QSPI_IO3 (0 + 5) // HOLD if using two bit interface (i.e. not used)
|
|
|
|
// On-board QSPI Flash
|
|
#define EXTERNAL_FLASH_DEVICES MX25R1635F
|
|
#define EXTERNAL_FLASH_USE_QSPI
|
|
|
|
/*
|
|
* Lora radio
|
|
*/
|
|
|
|
#define USE_SX1262
|
|
// #define USE_SX1268
|
|
#define SX126X_CS (0 + 24) // FIXME - we really should define LORA_CS instead
|
|
#define LORA_CS (0 + 24)
|
|
#define SX126X_DIO1 (0 + 20)
|
|
// Note DIO2 is attached internally to the module to an analog switch for TX/RX switching
|
|
// #define SX1262_DIO3 (0 + 21)
|
|
// This is used as an *output* from the sx1262 and connected internally to power the tcxo, do not drive from the
|
|
// main
|
|
// CPU?
|
|
#define SX126X_BUSY (0 + 17)
|
|
#define SX126X_RESET (0 + 25)
|
|
// Not really an E22 but TTGO seems to be trying to clone that
|
|
#define SX126X_DIO2_AS_RF_SWITCH
|
|
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
|
|
|
#define PIN_SPI1_MISO \
|
|
ST7789_MISO // FIXME not really needed, but for now the SPI code requires something to be defined, pick an used GPIO
|
|
#define PIN_SPI1_MOSI ST7789_SDA
|
|
#define PIN_SPI1_SCK ST7789_SCK
|
|
|
|
/*
|
|
* GPS pins
|
|
*/
|
|
|
|
#define GPS_L76K
|
|
|
|
// #define PIN_GPS_RESET (32 + 6) // An output to reset L76K GPS. As per datasheet, low for > 100ms will reset the L76K
|
|
#define GPS_RESET_MODE LOW
|
|
#define PIN_GPS_EN (21)
|
|
#define GPS_EN_ACTIVE HIGH
|
|
#define PIN_GPS_STANDBY (32 + 2) // An output to wake GPS, low means allow sleep, high means force wake
|
|
#define PIN_GPS_PPS (32 + 4)
|
|
// Seems to be missing on this new board
|
|
// #define PIN_GPS_PPS (32 + 4) // Pulse per second input from the GPS
|
|
#define GPS_TX_PIN (32 + 5) // This is for bits going TOWARDS the CPU
|
|
#define GPS_RX_PIN (32 + 7) // This is for bits going TOWARDS the GPS
|
|
|
|
#define GPS_THREAD_INTERVAL 50
|
|
|
|
#define PIN_SERIAL1_RX GPS_TX_PIN
|
|
#define PIN_SERIAL1_TX GPS_RX_PIN
|
|
|
|
// PCF8563 RTC Module
|
|
#define PCF8563_RTC 0x51
|
|
|
|
/*
|
|
* SPI Interfaces
|
|
*/
|
|
#define SPI_INTERFACES_COUNT 2
|
|
|
|
// For LORA, spi 0
|
|
#define PIN_SPI_MISO (0 + 23)
|
|
#define PIN_SPI_MOSI (0 + 22)
|
|
#define PIN_SPI_SCK (0 + 19)
|
|
|
|
// #define PIN_PWR_EN (0 + 6)
|
|
|
|
// To debug via the segger JLINK console rather than the CDC-ACM serial device
|
|
// #define USE_SEGGER
|
|
|
|
// Battery
|
|
// The battery sense is hooked to pin A0 (4)
|
|
// it is defined in the anlaolgue pin section of this file
|
|
// and has 12 bit resolution
|
|
|
|
#define ADC_CTRL 6
|
|
#define ADC_CTRL_ENABLED HIGH
|
|
#define BATTERY_PIN 4
|
|
#define ADC_RESOLUTION 14
|
|
|
|
#define BATTERY_SENSE_RESOLUTION_BITS 12
|
|
#define BATTERY_SENSE_RESOLUTION 4096.0
|
|
#undef AREF_VOLTAGE
|
|
#define AREF_VOLTAGE 3.0
|
|
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
|
|
#define ADC_MULTIPLIER (4.90F)
|
|
|
|
#define HAS_RTC 0
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
/*----------------------------------------------------------------------------
|
|
* Arduino objects - C++ only
|
|
*----------------------------------------------------------------------------*/
|
|
|
|
#endif
|