mirror of
https://github.com/meshtastic/firmware.git
synced 2025-10-28 23:34:03 +00:00
058e9769d6
* Add heartbeat LED for HT-VME290 and HT-VME213 Not populated on original board, however revisions are now shipping which do have the LED * Update outdated commenting * Trunk strikes again
55 lines
1.3 KiB
C
55 lines
1.3 KiB
C
#define LED_PIN 45 // LED is not populated on earliest board variant
|
|
#define BUTTON_PIN 0
|
|
#define BUTTON_PIN_SECONDARY 21 // Second built-in button
|
|
#define BUTTON_SECONDARY_CANNEDMESSAGES // By default, use the secondary button as canned message input
|
|
|
|
// I2C
|
|
#define I2C_SDA SDA
|
|
#define I2C_SCL SCL
|
|
|
|
// Display (E-Ink)
|
|
#define USE_EINK
|
|
#define PIN_EINK_CS 3
|
|
#define PIN_EINK_BUSY 6
|
|
#define PIN_EINK_DC 4
|
|
#define PIN_EINK_RES 5
|
|
#define PIN_EINK_SCLK 2
|
|
#define PIN_EINK_MOSI 1
|
|
|
|
// SPI
|
|
#define SPI_INTERFACES_COUNT 2
|
|
#define PIN_SPI_MISO 11
|
|
#define PIN_SPI_MOSI 10
|
|
#define PIN_SPI_SCK 9
|
|
|
|
// Power
|
|
#define VEXT_ENABLE 18 // Powers the E-Ink display only
|
|
#define VEXT_ON_VALUE HIGH
|
|
#define ADC_CTRL 46
|
|
#define ADC_CTRL_ENABLED HIGH
|
|
#define BATTERY_PIN 7
|
|
#define ADC_CHANNEL ADC1_GPIO7_CHANNEL
|
|
#define ADC_MULTIPLIER 4.9 * 1.03
|
|
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5
|
|
#define HAS_32768HZ
|
|
|
|
// LoRa
|
|
#define USE_SX1262
|
|
|
|
#define LORA_DIO0 RADIOLIB_NC // a No connect on the SX1262 module
|
|
#define LORA_RESET 12
|
|
#define LORA_DIO1 14 // SX1262 IRQ
|
|
#define LORA_DIO2 13 // SX1262 BUSY
|
|
|
|
#define LORA_SCK 9
|
|
#define LORA_MISO 11
|
|
#define LORA_MOSI 10
|
|
#define LORA_CS 8
|
|
|
|
#define SX126X_CS LORA_CS
|
|
#define SX126X_DIO1 LORA_DIO1
|
|
#define SX126X_BUSY LORA_DIO2
|
|
#define SX126X_RESET LORA_RESET
|
|
|
|
#define SX126X_DIO2_AS_RF_SWITCH
|
|
#define SX126X_DIO3_TCXO_VOLTAGE 1.8 |