mirror of
https://github.com/meshtastic/firmware.git
synced 2025-02-01 18:29:56 +00:00
d1ff160256
* add bootloader install script for wio tracker 1110 board Mostly for documentation purposes for future devs. * Generalize nrf52 hw debugging support so it works on all nrf52 targets
78 lines
3.2 KiB
INI
78 lines
3.2 KiB
INI
[nrf52840_base]
|
|
extends = nrf52_base
|
|
|
|
build_flags = ${nrf52_base.build_flags}
|
|
|
|
lib_deps =
|
|
${nrf52_base.lib_deps}
|
|
${environmental_base.lib_deps}
|
|
https://github.com/Kongduino/Adafruit_nRFCrypto.git#e31a8825ea3300b163a0a3c1ddd5de34e10e1371
|
|
|
|
; Common NRF52 debugging settings follow. See the Meshtastic developer docs for how to connect SWD debugging probes to your board.
|
|
|
|
; We want the initial breakpoint at setup() instead of main(). Also we want to enable semihosting at that point so instead of
|
|
debug_init_break = tbreak setup
|
|
; we just turn off the platformio tbreak and do it in .gdbinit (where we have more flexibility for scripting)
|
|
; also we use a permanent breakpoint so it gets reused each time we restart the debugging session?
|
|
; debug_init_break = tbreak main
|
|
|
|
; Note: add "monitor arm semihosting_redirect tcp 4444 all" if you want the stdout from the device to go to that port number instead
|
|
; (for use by meshtastic command line)
|
|
; monitor arm semihosting disable
|
|
; monitor debug_level 3
|
|
;
|
|
; IMPORTANT: fileio must be disabled before using port 5555 - openocd ver 0.12 has a bug where if enabled it never properly parses the special :tt name
|
|
; for stdio access.
|
|
; monitor arm semihosting_redirect tcp 5555 stdio
|
|
|
|
; Also note: it is _impossible_ to do non blocking reads on the semihost console port (an oversight when ARM specified the semihost API).
|
|
; So we'll neve be able to general purpose bi-directional communication with the device over semihosting.
|
|
debug_extra_cmds =
|
|
echo Running .gdbinit script
|
|
;monitor arm semihosting enable
|
|
;monitor arm semihosting_fileio enable
|
|
;monitor arm semihosting_redirect disable
|
|
commands 1
|
|
; echo Breakpoint at setup() has semihosting console, connect to it with "telnet localhost 5555"
|
|
; set wantSemihost = 1
|
|
set useSoftDevice = 0
|
|
end
|
|
|
|
; Only reprogram the board if the code has changed
|
|
debug_load_mode = modified
|
|
;debug_load_mode = manual
|
|
; We default to the stlink adapter because it is very cheap and works well, though others (such as jlink) are also supported.
|
|
;debug_tool = jlink
|
|
debug_tool = stlink
|
|
debug_speed = 4000
|
|
;debug_tool = custom
|
|
; debug_server =
|
|
; openocd
|
|
; -f
|
|
; /usr/local/share/openocd/scripts/interface/stlink.cfg
|
|
; -f
|
|
; /usr/local/share/openocd/scripts/target/nrf52.cfg
|
|
; $PLATFORMIO_CORE_DIR/packages/tool-openocd/openocd/scripts/interface/cmsis-dap.cfg
|
|
|
|
; Allows programming and debug via the RAK NanoDAP as the default debugger tool for the RAK4631 (it is only $10!)
|
|
; programming time is about the same as the bootloader version.
|
|
; For information on this see the meshtastic developers documentation for "Development on the NRF52"
|
|
; We manually pass in the elf file so that pyocd can reverse engineer FreeRTOS data (running threads, etc...)
|
|
;debug_server =
|
|
; pyocd
|
|
; gdbserver
|
|
; -j
|
|
; ${platformio.workspace_dir}/..
|
|
; -t
|
|
; nrf52840
|
|
; --semihosting
|
|
; --elf
|
|
; ${platformio.build_dir}/${this.__env__}/firmware.elf
|
|
|
|
; If you want to debug the semihosting support you can turn on extra logging in pyocd with
|
|
; -L
|
|
; pyocd.debug.semihost.trace=debug
|
|
|
|
; The following is not needed because it automatically tries do this
|
|
;debug_server_ready_pattern = -.*GDB server started on port \d+.*
|
|
;debug_port = localhost:3333 |