mirror of
https://github.com/meshtastic/firmware.git
synced 2025-02-08 05:31:25 +00:00
2ff0af55b1
* New variant "t-energy-s3_e22" - Lilygo T-Energy-S3 - NanoVHF "Mesh-v1.06-TTGO-T18" board - Ebyte E22 Series * add board_level = extra * Update variant.h --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net>
47 lines
1.9 KiB
C
47 lines
1.9 KiB
C
// NanoVHF T-Energy-S3 + E22(0)-xxxM - DIY
|
|
// https://github.com/NanoVHF/Meshtastic-DIY/tree/main/PCB/ESP-32-devkit_EBYTE-E22/Mesh-v1.06-TTGO-T18
|
|
|
|
// Battery
|
|
#define BATTERY_PIN 3
|
|
#define ADC_MULTIPLIER 2.0
|
|
#define ADC_CHANNEL ADC1_GPIO3_CHANNEL
|
|
|
|
// Button on NanoVHF PCB
|
|
#define BUTTON_PIN 39
|
|
|
|
// I2C via connectors on NanoVHF PCB
|
|
#define I2C_SCL 2
|
|
#define I2C_SDA 42
|
|
|
|
// Screen (disabled)
|
|
#define HAS_SCREEN 0 // Assume no screen present by default to prevent crash...
|
|
|
|
// GPS via T-Energy-S3 onboard connector
|
|
#define HAS_GPS 1
|
|
#define GPS_TX_PIN 43
|
|
#define GPS_RX_PIN 44
|
|
|
|
// LoRa
|
|
#define USE_SX1262 // E22-900M30S, E22-900M22S, and E22-900MM22S (not E220!) use SX1262
|
|
#define USE_SX1268 // E22-400M30S, E22-400M33S, E22-400M22S, and E22-400MM22S use SX1268
|
|
|
|
#define SX126X_MAX_POWER 22 // SX126xInterface.cpp defaults to 22 if not defined, but here we define it for good practice
|
|
#define SX126X_DIO3_TCXO_VOLTAGE 1.8 // E22 series TCXO reference voltage is 1.8V
|
|
|
|
#define SX126X_CS 5 // EBYTE module's NSS pin // FIXME: rename to SX126X_SS
|
|
#define SX126X_SCK 6 // EBYTE module's SCK pin
|
|
#define SX126X_MOSI 13 // EBYTE module's MOSI pin
|
|
#define SX126X_MISO 4 // EBYTE module's MISO pin
|
|
#define SX126X_RESET 1 // EBYTE module's NRST pin
|
|
#define SX126X_BUSY 48 // EBYTE module's BUSY pin
|
|
#define SX126X_DIO1 47 // EBYTE module's DIO1 pin
|
|
|
|
#define SX126X_TXEN 10 // Schematic connects EBYTE module's TXEN pin to MCU
|
|
#define SX126X_RXEN 12 // Schematic connects EBYTE module's RXEN pin to MCU
|
|
|
|
#define LORA_CS SX126X_CS // Compatibility with variant file configuration structure
|
|
#define LORA_SCK SX126X_SCK // Compatibility with variant file configuration structure
|
|
#define LORA_MOSI SX126X_MOSI // Compatibility with variant file configuration structure
|
|
#define LORA_MISO SX126X_MISO // Compatibility with variant file configuration structure
|
|
#define LORA_DIO1 SX126X_DIO1 // Compatibility with variant file configuration structure
|