Kevin Hester d7d13d637c clean up filesystem goo, add spiffs to install scripts, fix #496 ... @mc-hamster seems to work pretty good for me, so I'll send a PR to you for the dev-http branch. I'll push out an android alpha build later today (once the build is complete). Once this new device load is out in the field _future_ device builds will support updating spiffs from android. (i.e. device loads older than 1.1.9 must be updated to 1.1.9 or later before spiffs support is implemented on the device side - so some users might need to update twice before the new spiffs contents will appear on their device)		2020-11-19 09:25:02 +08:00
..
build-all.sh	clean up filesystem goo, add spiffs to install scripts, fix #496	2020-11-19 09:25:02 +08:00
device-install.sh	clean up filesystem goo, add spiffs to install scripts, fix #496	2020-11-19 09:25:02 +08:00
device-update.sh
dump-ram-users.sh
exception_decoder.py
genpartitions.py
install-bootloader.sh	The new 7.2.0 soft device works on nrf52833	2020-10-28 13:01:50 +08:00
install-eink.sh	eink display improvements	2020-10-16 10:53:55 +08:00
lora32-openocd.cfg
nrf52-console.sh
nrf52832-gdbserver.sh	ppr1 make jlink scripts	2020-10-14 10:21:55 +08:00
nrf52833-gdbserver.sh	ppr1 make jlink scripts	2020-10-14 10:21:55 +08:00
nrf52840-gdbserver.sh	ppr1 make jlink scripts	2020-10-14 10:21:55 +08:00
program-release-heltec.sh
program-release-tbeam.sh
qspi-flash-test.sh
read-system-info.sh
regen-protos.sh
run-0-monitor.sh
run-1-monitor.sh
run-both-monitor.sh
run-openocd.sh
start-terminal0.sh
start-terminal1.sh
uf2conv.py
upload-to-bootloader.sh	corvus2 gps still doesn't work WIP	2020-10-13 14:43:28 +08:00
upload-usb1.sh
version.sh	1.1.8	2020-11-07 19:20:38 +08:00
view-map.sh	PPR1 and allow boards to set lower or higher sx1262 power limits	2020-10-15 13:47:10 +08:00