firmware/variants/wio-sdk-wm1110/softdevice/ble_gattc.h

/*
 * Copyright (c) Nordic Semiconductor ASA
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice, this
 *    list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form, except as embedded into a Nordic
 *    Semiconductor ASA integrated circuit in a product or a software update for
 *    such product, must reproduce the above copyright notice, this list of
 *    conditions and the following disclaimer in the documentation and/or other
 *    materials provided with the distribution.
 *
 * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
 *    contributors may be used to endorse or promote products derived from this
 *    software without specific prior written permission.
 *
 * 4. This software, with or without modification, must only be used with a
 *    Nordic Semiconductor ASA integrated circuit.
 *
 * 5. Any software provided in binary form under this license must not be reverse
 *    engineered, decompiled, modified and/or disassembled.
 *
 * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
 * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/**
  @addtogroup BLE_GATTC Generic Attribute Profile (GATT) Client
  @{
  @brief  Definitions and prototypes for the GATT Client interface.
 */

#ifndef BLE_GATTC_H__
#define BLE_GATTC_H__

#include "ble_err.h"
#include "ble_gatt.h"
#include "ble_ranges.h"
#include "ble_types.h"
#include "nrf.h"
#include "nrf_error.h"
#include "nrf_svc.h"
#include <stdint.h>

#ifdef __cplusplus
extern "C" {
#endif

/** @addtogroup BLE_GATTC_ENUMERATIONS Enumerations
 * @{ */

/**@brief GATTC API SVC numbers. */
enum BLE_GATTC_SVCS {
    SD_BLE_GATTC_PRIMARY_SERVICES_DISCOVER = BLE_GATTC_SVC_BASE, /**< Primary Service Discovery. */
    SD_BLE_GATTC_RELATIONSHIPS_DISCOVER,                         /**< Relationship Discovery. */
    SD_BLE_GATTC_CHARACTERISTICS_DISCOVER,                       /**< Characteristic Discovery. */
    SD_BLE_GATTC_DESCRIPTORS_DISCOVER,                           /**< Characteristic Descriptor Discovery. */
    SD_BLE_GATTC_ATTR_INFO_DISCOVER,                             /**< Attribute Information Discovery. */
    SD_BLE_GATTC_CHAR_VALUE_BY_UUID_READ,                        /**< Read Characteristic Value by UUID. */
    SD_BLE_GATTC_READ,                                           /**< Generic read. */
    SD_BLE_GATTC_CHAR_VALUES_READ,                               /**< Read multiple Characteristic Values. */
    SD_BLE_GATTC_WRITE,                                          /**< Generic write. */
    SD_BLE_GATTC_HV_CONFIRM,                                     /**< Handle Value Confirmation. */
    SD_BLE_GATTC_EXCHANGE_MTU_REQUEST,                           /**< Exchange MTU Request. */
};

/**
 * @brief GATT Client Event IDs.
 */
enum BLE_GATTC_EVTS {
    BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP = BLE_GATTC_EVT_BASE, /**< Primary Service Discovery Response event.          \n See @ref
                                                              ble_gattc_evt_prim_srvc_disc_rsp_t.          */
    BLE_GATTC_EVT_REL_DISC_RSP,  /**< Relationship Discovery Response event.             \n See @ref ble_gattc_evt_rel_disc_rsp_t.
                                  */
    BLE_GATTC_EVT_CHAR_DISC_RSP, /**< Characteristic Discovery Response event.           \n See @ref
                                    ble_gattc_evt_char_disc_rsp_t.               */
    BLE_GATTC_EVT_DESC_DISC_RSP, /**< Descriptor Discovery Response event.               \n See @ref
                                    ble_gattc_evt_desc_disc_rsp_t.               */
    BLE_GATTC_EVT_ATTR_INFO_DISC_RSP,        /**< Attribute Information Response event.              \n See @ref
                                                ble_gattc_evt_attr_info_disc_rsp_t. */
    BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP, /**< Read By UUID Response event.                       \n See @ref
                                                ble_gattc_evt_char_val_by_uuid_read_rsp_t.   */
    BLE_GATTC_EVT_READ_RSP, /**< Read Response event.                               \n See @ref ble_gattc_evt_read_rsp_t. */
    BLE_GATTC_EVT_CHAR_VALS_READ_RSP, /**< Read multiple Response event.                      \n See @ref
                                         ble_gattc_evt_char_vals_read_rsp_t.          */
    BLE_GATTC_EVT_WRITE_RSP, /**< Write Response event.                              \n See @ref ble_gattc_evt_write_rsp_t. */
    BLE_GATTC_EVT_HVX,       /**< Handle Value Notification or Indication event.     \n Confirm indication with @ref
                                sd_ble_gattc_hv_confirm.  \n See @ref ble_gattc_evt_hvx_t. */
    BLE_GATTC_EVT_EXCHANGE_MTU_RSP, /**< Exchange MTU Response event.                       \n See @ref
                                       ble_gattc_evt_exchange_mtu_rsp_t.            */
    BLE_GATTC_EVT_TIMEOUT, /**< Timeout event.                                     \n See @ref ble_gattc_evt_timeout_t. */
    BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE /**< Write without Response transmission complete.      \n See @ref
                                           ble_gattc_evt_write_cmd_tx_complete_t.       */
};

/**@brief GATTC Option IDs.
 * IDs that uniquely identify a GATTC option.
 */
enum BLE_GATTC_OPTS {
    BLE_GATTC_OPT_UUID_DISC = BLE_GATTC_OPT_BASE, /**< UUID discovery. @ref ble_gattc_opt_uuid_disc_t  */
};

/** @} */

/** @addtogroup BLE_GATTC_DEFINES Defines
 * @{ */

/** @defgroup BLE_ERRORS_GATTC SVC return values specific to GATTC
 * @{ */
#define BLE_ERROR_GATTC_PROC_NOT_PERMITTED (NRF_GATTC_ERR_BASE + 0x000) /**< Procedure not Permitted. */
/** @} */

/** @defgroup BLE_GATTC_ATTR_INFO_FORMAT Attribute Information Formats
 * @{ */
#define BLE_GATTC_ATTR_INFO_FORMAT_16BIT 1  /**< 16-bit Attribute Information Format. */
#define BLE_GATTC_ATTR_INFO_FORMAT_128BIT 2 /**< 128-bit Attribute Information Format. */
/** @} */

/** @defgroup BLE_GATTC_DEFAULTS GATT Client defaults
 * @{ */
#define BLE_GATTC_WRITE_CMD_TX_QUEUE_SIZE_DEFAULT                                                                                \
    1 /**< Default number of Write without Response that can be queued for transmission. */
/** @} */

/** @} */

/** @addtogroup BLE_GATTC_STRUCTURES Structures
 * @{ */

/**
 * @brief BLE GATTC connection configuration parameters, set with @ref sd_ble_cfg_set.
 */
typedef struct {
    uint8_t write_cmd_tx_queue_size; /**< The guaranteed minimum number of Write without Response that can be queued for
                                        transmission. The default value is @ref BLE_GATTC_WRITE_CMD_TX_QUEUE_SIZE_DEFAULT */
} ble_gattc_conn_cfg_t;

/**@brief Operation Handle Range. */
typedef struct {
    uint16_t start_handle; /**< Start Handle. */
    uint16_t end_handle;   /**< End Handle. */
} ble_gattc_handle_range_t;

/**@brief GATT service. */
typedef struct {
    ble_uuid_t uuid;                       /**< Service UUID. */
    ble_gattc_handle_range_t handle_range; /**< Service Handle Range. */
} ble_gattc_service_t;

/**@brief  GATT include. */
typedef struct {
    uint16_t handle;                   /**< Include Handle. */
    ble_gattc_service_t included_srvc; /**< Handle of the included service. */
} ble_gattc_include_t;

/**@brief GATT characteristic. */
typedef struct {
    ble_uuid_t uuid;                  /**< Characteristic UUID. */
    ble_gatt_char_props_t char_props; /**< Characteristic Properties. */
    uint8_t char_ext_props : 1;       /**< Extended properties present. */
    uint16_t handle_decl;             /**< Handle of the Characteristic Declaration. */
    uint16_t handle_value;            /**< Handle of the Characteristic Value. */
} ble_gattc_char_t;

/**@brief GATT descriptor. */
typedef struct {
    uint16_t handle; /**< Descriptor Handle. */
    ble_uuid_t uuid; /**< Descriptor UUID. */
} ble_gattc_desc_t;

/**@brief Write Parameters. */
typedef struct {
    uint8_t write_op;       /**< Write Operation to be performed, see @ref BLE_GATT_WRITE_OPS. */
    uint8_t flags;          /**< Flags, see @ref BLE_GATT_EXEC_WRITE_FLAGS. */
    uint16_t handle;        /**< Handle to the attribute to be written. */
    uint16_t offset;        /**< Offset in bytes. @note For WRITE_CMD and WRITE_REQ, offset must be 0. */
    uint16_t len;           /**< Length of data in bytes. */
    uint8_t const *p_value; /**< Pointer to the value data. */
} ble_gattc_write_params_t;

/**@brief Attribute Information for 16-bit Attribute UUID. */
typedef struct {
    uint16_t handle; /**< Attribute handle. */
    ble_uuid_t uuid; /**< 16-bit Attribute UUID. */
} ble_gattc_attr_info16_t;

/**@brief Attribute Information for 128-bit Attribute UUID. */
typedef struct {
    uint16_t handle;    /**< Attribute handle. */
    ble_uuid128_t uuid; /**< 128-bit Attribute UUID. */
} ble_gattc_attr_info128_t;

/**@brief Event structure for @ref BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP. */
typedef struct {
    uint16_t count;                  /**< Service count. */
    ble_gattc_service_t services[1]; /**< Service data. @note This is a variable length array. The size of 1 indicated is only a
                                        placeholder for compilation. See @ref sd_ble_evt_get for more information on how to use
                                        event structures with variable length array members. */
} ble_gattc_evt_prim_srvc_disc_rsp_t;

/**@brief Event structure for @ref BLE_GATTC_EVT_REL_DISC_RSP. */
typedef struct {
    uint16_t count;                  /**< Include count. */
    ble_gattc_include_t includes[1]; /**< Include data. @note This is a variable length array. The size of 1 indicated is only a
                                        placeholder for compilation. See @ref sd_ble_evt_get for more information on how to use
                                        event structures with variable length array members. */
} ble_gattc_evt_rel_disc_rsp_t;

/**@brief Event structure for @ref BLE_GATTC_EVT_CHAR_DISC_RSP. */
typedef struct {
    uint16_t count;            /**< Characteristic count. */
    ble_gattc_char_t chars[1]; /**< Characteristic data. @note This is a variable length array. The size of 1 indicated is only a
                                  placeholder for compilation. See @ref sd_ble_evt_get for more information on how to use event
                                  structures with variable length array members. */
} ble_gattc_evt_char_disc_rsp_t;

/**@brief Event structure for @ref BLE_GATTC_EVT_DESC_DISC_RSP. */
typedef struct {
    uint16_t count;            /**< Descriptor count. */
    ble_gattc_desc_t descs[1]; /**< Descriptor data. @note This is a variable length array. The size of 1 indicated is only a
                                  placeholder for compilation. See @ref sd_ble_evt_get for more information on how to use event
                                  structures with variable length array members. */
} ble_gattc_evt_desc_disc_rsp_t;

/**@brief Event structure for @ref BLE_GATTC_EVT_ATTR_INFO_DISC_RSP. */
typedef struct {
    uint16_t count; /**< Attribute count. */
    uint8_t format; /**< Attribute information format, see @ref BLE_GATTC_ATTR_INFO_FORMAT. */
    union {
        ble_gattc_attr_info16_t attr_info16[1];   /**< Attribute information for 16-bit Attribute UUID.
                                                       @note This is a variable length array. The size of 1 indicated is only a
                                                     placeholder for compilation.   See @ref sd_ble_evt_get for more information on
                                                     how to use event structures with variable length array members. */
        ble_gattc_attr_info128_t attr_info128[1]; /**< Attribute information for 128-bit Attribute UUID.
                                                       @note This is a variable length array. The size of 1 indicated is only a
                                                     placeholder for compilation. See @ref sd_ble_evt_get for more information on
                                                     how to use event structures with variable length array members. */
    } info;                                       /**< Attribute information union. */
} ble_gattc_evt_attr_info_disc_rsp_t;

/**@brief GATT read by UUID handle value pair. */
typedef struct {
    uint16_t handle;  /**< Attribute Handle. */
    uint8_t *p_value; /**< Pointer to the Attribute Value, length is available in @ref
                         ble_gattc_evt_char_val_by_uuid_read_rsp_t::value_len. */
} ble_gattc_handle_value_t;

/**@brief Event structure for @ref BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP. */
typedef struct {
    uint16_t count;          /**< Handle-Value Pair Count. */
    uint16_t value_len;      /**< Length of the value in Handle-Value(s) list. */
    uint8_t handle_value[1]; /**< Handle-Value(s) list. To iterate through the list use @ref
                                sd_ble_gattc_evt_char_val_by_uuid_read_rsp_iter.
                                  @note This is a variable length array. The size of 1 indicated is only a placeholder for
                                compilation. See @ref sd_ble_evt_get for more information on how to use event structures with
                                variable length array members. */
} ble_gattc_evt_char_val_by_uuid_read_rsp_t;

/**@brief Event structure for @ref BLE_GATTC_EVT_READ_RSP. */
typedef struct {
    uint16_t handle; /**< Attribute Handle. */
    uint16_t offset; /**< Offset of the attribute data. */
    uint16_t len;    /**< Attribute data length. */
    uint8_t data[1]; /**< Attribute data. @note This is a variable length array. The size of 1 indicated is only a placeholder for
                        compilation. See @ref sd_ble_evt_get for more information on how to use event structures with variable
                        length array members. */
} ble_gattc_evt_read_rsp_t;

/**@brief Event structure for @ref BLE_GATTC_EVT_CHAR_VALS_READ_RSP. */
typedef struct {
    uint16_t len;      /**< Concatenated Attribute values length. */
    uint8_t values[1]; /**< Attribute values. @note This is a variable length array. The size of 1 indicated is only a placeholder
                          for compilation. See @ref sd_ble_evt_get for more information on how to use event structures with
                          variable length array members. */
} ble_gattc_evt_char_vals_read_rsp_t;

/**@brief Event structure for @ref BLE_GATTC_EVT_WRITE_RSP. */
typedef struct {
    uint16_t handle;  /**< Attribute Handle. */
    uint8_t write_op; /**< Type of write operation, see @ref BLE_GATT_WRITE_OPS. */
    uint16_t offset;  /**< Data offset. */
    uint16_t len;     /**< Data length. */
    uint8_t data[1];  /**< Data. @note This is a variable length array. The size of 1 indicated is only a placeholder for
                         compilation.  See @ref sd_ble_evt_get for more information on how to use event structures with variable
                         length array members. */
} ble_gattc_evt_write_rsp_t;

/**@brief Event structure for @ref BLE_GATTC_EVT_HVX. */
typedef struct {
    uint16_t handle; /**< Handle to which the HVx operation applies. */
    uint8_t type;    /**< Indication or Notification, see @ref BLE_GATT_HVX_TYPES. */
    uint16_t len;    /**< Attribute data length. */
    uint8_t data[1]; /**< Attribute data. @note This is a variable length array. The size of 1 indicated is only a placeholder for
                        compilation. See @ref sd_ble_evt_get for more information on how to use event structures with variable
                        length array members. */
} ble_gattc_evt_hvx_t;

/**@brief Event structure for @ref BLE_GATTC_EVT_EXCHANGE_MTU_RSP. */
typedef struct {
    uint16_t server_rx_mtu; /**< Server RX MTU size. */
} ble_gattc_evt_exchange_mtu_rsp_t;

/**@brief Event structure for @ref BLE_GATTC_EVT_TIMEOUT. */
typedef struct {
    uint8_t src; /**< Timeout source, see @ref BLE_GATT_TIMEOUT_SOURCES. */
} ble_gattc_evt_timeout_t;

/**@brief Event structure for @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE. */
typedef struct {
    uint8_t count; /**< Number of write without response transmissions completed. */
} ble_gattc_evt_write_cmd_tx_complete_t;

/**@brief GATTC event structure. */
typedef struct {
    uint16_t conn_handle; /**< Connection Handle on which event occurred. */
    uint16_t gatt_status; /**< GATT status code for the operation, see @ref BLE_GATT_STATUS_CODES. */
    uint16_t
        error_handle; /**< In case of error: The handle causing the error. In all other cases @ref BLE_GATT_HANDLE_INVALID. */
    union {
        ble_gattc_evt_prim_srvc_disc_rsp_t prim_srvc_disc_rsp; /**< Primary Service Discovery Response Event Parameters. */
        ble_gattc_evt_rel_disc_rsp_t rel_disc_rsp;             /**< Relationship Discovery Response Event Parameters. */
        ble_gattc_evt_char_disc_rsp_t char_disc_rsp;           /**< Characteristic Discovery Response Event Parameters. */
        ble_gattc_evt_desc_disc_rsp_t desc_disc_rsp;           /**< Descriptor Discovery Response Event Parameters. */
        ble_gattc_evt_char_val_by_uuid_read_rsp_t
            char_val_by_uuid_read_rsp;     /**< Characteristic Value Read by UUID Response Event Parameters. */
        ble_gattc_evt_read_rsp_t read_rsp; /**< Read Response Event Parameters. */
        ble_gattc_evt_char_vals_read_rsp_t char_vals_read_rsp; /**< Characteristic Values Read Response Event Parameters. */
        ble_gattc_evt_write_rsp_t write_rsp;                   /**< Write Response Event Parameters. */
        ble_gattc_evt_hvx_t hvx;                               /**< Handle Value Notification/Indication Event Parameters. */
        ble_gattc_evt_exchange_mtu_rsp_t exchange_mtu_rsp;     /**< Exchange MTU Response Event Parameters. */
        ble_gattc_evt_timeout_t timeout;                       /**< Timeout Event Parameters. */
        ble_gattc_evt_attr_info_disc_rsp_t attr_info_disc_rsp; /**< Attribute Information Discovery Event Parameters. */
        ble_gattc_evt_write_cmd_tx_complete_t
            write_cmd_tx_complete; /**< Write without Response transmission complete Event Parameters. */
    } params;                      /**< Event Parameters. @note Only valid if @ref gatt_status == @ref BLE_GATT_STATUS_SUCCESS. */
} ble_gattc_evt_t;

/**@brief UUID discovery option.
 *
 * @details Used with @ref sd_ble_opt_set to enable and disable automatic insertion of discovered 128-bit UUIDs to the
 *          Vendor Specific UUID table. Disabled by default.
 *          - When disabled, if a procedure initiated by
 *            @ref sd_ble_gattc_primary_services_discover,
 *            @ref sd_ble_gattc_relationships_discover,
 *            @ref sd_ble_gattc_characteristics_discover,
 *            @ref sd_ble_gattc_descriptors_discover
 *            finds a 128-bit UUID which was not added by @ref sd_ble_uuid_vs_add, @ref ble_uuid_t::type will be set
 *            to @ref BLE_UUID_TYPE_UNKNOWN in the corresponding event.
 *          - When enabled, all found 128-bit UUIDs will be automatically added. The application can use
 *            @ref sd_ble_uuid_encode to retrieve the 128-bit UUID from @ref ble_uuid_t received in the corresponding
 *            event. If the total number of Vendor Specific UUIDs exceeds the table capacity, @ref ble_uuid_t::type will
 *            be set to @ref BLE_UUID_TYPE_UNKNOWN in the corresponding event.
 *            See also @ref ble_common_cfg_vs_uuid_t, @ref sd_ble_uuid_vs_remove.
 *
 * @note @ref sd_ble_opt_get is not supported for this option.
 *
 * @retval ::NRF_SUCCESS Set successfully.
 *
 */
typedef struct {
    uint8_t auto_add_vs_enable : 1; /**< Set to 1 to enable (or 0 to disable) automatic insertion of discovered 128-bit UUIDs. */
} ble_gattc_opt_uuid_disc_t;

/**@brief Option structure for GATTC options. */
typedef union {
    ble_gattc_opt_uuid_disc_t uuid_disc; /**< Parameters for the UUID discovery option. */
} ble_gattc_opt_t;

/** @} */

/** @addtogroup BLE_GATTC_FUNCTIONS Functions
 * @{ */

/**@brief Initiate or continue a GATT Primary Service Discovery procedure.
 *
 * @details This function initiates or resumes a Primary Service discovery procedure, starting from the supplied handle.
 *          If the last service has not been reached, this function must be called again with an updated start handle value to
 * continue the search. See also @ref ble_gattc_opt_uuid_disc_t.
 *
 * @events
 * @event{@ref BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP}
 * @endevents
 *
 * @mscs
 * @mmsc{@ref BLE_GATTC_PRIM_SRVC_DISC_MSC}
 * @endmscs
 *
 * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
 * @param[in] start_handle Handle to start searching from.
 * @param[in] p_srvc_uuid Pointer to the service UUID to be found. If it is NULL, all primary services will be returned.
 *
 * @retval ::NRF_SUCCESS Successfully started or resumed the Primary Service Discovery procedure.
 * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
 * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State.
 * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
 * @retval ::NRF_ERROR_BUSY Client procedure already in progress.
 * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without
 * reestablishing the connection.
 */
SVCALL(SD_BLE_GATTC_PRIMARY_SERVICES_DISCOVER, uint32_t,
       sd_ble_gattc_primary_services_discover(uint16_t conn_handle, uint16_t start_handle, ble_uuid_t const *p_srvc_uuid));

/**@brief Initiate or continue a GATT Relationship Discovery procedure.
 *
 * @details This function initiates or resumes the Find Included Services sub-procedure. If the last included service has not been
 * reached, this must be called again with an updated handle range to continue the search. See also @ref
 * ble_gattc_opt_uuid_disc_t.
 *
 * @events
 * @event{@ref BLE_GATTC_EVT_REL_DISC_RSP}
 * @endevents
 *
 * @mscs
 * @mmsc{@ref BLE_GATTC_REL_DISC_MSC}
 * @endmscs
 *
 * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
 * @param[in] p_handle_range A pointer to the range of handles of the Service to perform this procedure on.
 *
 * @retval ::NRF_SUCCESS Successfully started or resumed the Relationship Discovery procedure.
 * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
 * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State.
 * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
 * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
 * @retval ::NRF_ERROR_BUSY Client procedure already in progress.
 * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without
 * reestablishing the connection.
 */
SVCALL(SD_BLE_GATTC_RELATIONSHIPS_DISCOVER, uint32_t,
       sd_ble_gattc_relationships_discover(uint16_t conn_handle, ble_gattc_handle_range_t const *p_handle_range));

/**@brief Initiate or continue a GATT Characteristic Discovery procedure.
 *
 * @details This function initiates or resumes a Characteristic discovery procedure. If the last Characteristic has not been
 * reached, this must be called again with an updated handle range to continue the discovery. See also @ref
 * ble_gattc_opt_uuid_disc_t.
 *
 * @events
 * @event{@ref BLE_GATTC_EVT_CHAR_DISC_RSP}
 * @endevents
 *
 * @mscs
 * @mmsc{@ref BLE_GATTC_CHAR_DISC_MSC}
 * @endmscs
 *
 * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
 * @param[in] p_handle_range A pointer to the range of handles of the Service to perform this procedure on.
 *
 * @retval ::NRF_SUCCESS Successfully started or resumed the Characteristic Discovery procedure.
 * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
 * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State.
 * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
 * @retval ::NRF_ERROR_BUSY Client procedure already in progress.
 * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without
 * reestablishing the connection.
 */
SVCALL(SD_BLE_GATTC_CHARACTERISTICS_DISCOVER, uint32_t,
       sd_ble_gattc_characteristics_discover(uint16_t conn_handle, ble_gattc_handle_range_t const *p_handle_range));

/**@brief Initiate or continue a GATT Characteristic Descriptor Discovery procedure.
 *
 * @details This function initiates or resumes a Characteristic Descriptor discovery procedure. If the last Descriptor has not
 * been reached, this must be called again with an updated handle range to continue the discovery. See also @ref
 * ble_gattc_opt_uuid_disc_t.
 *
 * @events
 * @event{@ref BLE_GATTC_EVT_DESC_DISC_RSP}
 * @endevents
 *
 * @mscs
 * @mmsc{@ref BLE_GATTC_DESC_DISC_MSC}
 * @endmscs
 *
 * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
 * @param[in] p_handle_range A pointer to the range of handles of the Characteristic to perform this procedure on.
 *
 * @retval ::NRF_SUCCESS Successfully started or resumed the Descriptor Discovery procedure.
 * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
 * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State.
 * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
 * @retval ::NRF_ERROR_BUSY Client procedure already in progress.
 * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without
 * reestablishing the connection.
 */
SVCALL(SD_BLE_GATTC_DESCRIPTORS_DISCOVER, uint32_t,
       sd_ble_gattc_descriptors_discover(uint16_t conn_handle, ble_gattc_handle_range_t const *p_handle_range));

/**@brief Initiate or continue a GATT Read using Characteristic UUID procedure.
 *
 * @details This function initiates or resumes a Read using Characteristic UUID procedure. If the last Characteristic has not been
 * reached, this must be called again with an updated handle range to continue the discovery.
 *
 * @events
 * @event{@ref BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP}
 * @endevents
 *
 * @mscs
 * @mmsc{@ref BLE_GATTC_READ_UUID_MSC}
 * @endmscs
 *
 * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
 * @param[in] p_uuid Pointer to a Characteristic value UUID to read.
 * @param[in] p_handle_range A pointer to the range of handles to perform this procedure on.
 *
 * @retval ::NRF_SUCCESS Successfully started or resumed the Read using Characteristic UUID procedure.
 * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
 * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State.
 * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
 * @retval ::NRF_ERROR_BUSY Client procedure already in progress.
 * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without
 * reestablishing the connection.
 */
SVCALL(SD_BLE_GATTC_CHAR_VALUE_BY_UUID_READ, uint32_t,
       sd_ble_gattc_char_value_by_uuid_read(uint16_t conn_handle, ble_uuid_t const *p_uuid,
                                            ble_gattc_handle_range_t const *p_handle_range));

/**@brief Initiate or continue a GATT Read (Long) Characteristic or Descriptor procedure.
 *
 * @details This function initiates or resumes a GATT Read (Long) Characteristic or Descriptor procedure. If the Characteristic or
 * Descriptor to be read is longer than ATT_MTU - 1, this function must be called multiple times with appropriate offset to read
 * the complete value.
 *
 * @events
 * @event{@ref BLE_GATTC_EVT_READ_RSP}
 * @endevents
 *
 * @mscs
 * @mmsc{@ref BLE_GATTC_VALUE_READ_MSC}
 * @endmscs
 *
 * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
 * @param[in] handle The handle of the attribute to be read.
 * @param[in] offset Offset into the attribute value to be read.
 *
 * @retval ::NRF_SUCCESS Successfully started or resumed the Read (Long) procedure.
 * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
 * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State.
 * @retval ::NRF_ERROR_BUSY Client procedure already in progress.
 * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without
 * reestablishing the connection.
 */
SVCALL(SD_BLE_GATTC_READ, uint32_t, sd_ble_gattc_read(uint16_t conn_handle, uint16_t handle, uint16_t offset));

/**@brief Initiate a GATT Read Multiple Characteristic Values procedure.
 *
 * @details This function initiates a GATT Read Multiple Characteristic Values procedure.
 *
 * @events
 * @event{@ref BLE_GATTC_EVT_CHAR_VALS_READ_RSP}
 * @endevents
 *
 * @mscs
 * @mmsc{@ref BLE_GATTC_READ_MULT_MSC}
 * @endmscs
 *
 * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
 * @param[in] p_handles A pointer to the handle(s) of the attribute(s) to be read.
 * @param[in] handle_count The number of handles in p_handles.
 *
 * @retval ::NRF_SUCCESS Successfully started the Read Multiple Characteristic Values procedure.
 * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
 * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State.
 * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
 * @retval ::NRF_ERROR_BUSY Client procedure already in progress.
 * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without
 * reestablishing the connection.
 */
SVCALL(SD_BLE_GATTC_CHAR_VALUES_READ, uint32_t,
       sd_ble_gattc_char_values_read(uint16_t conn_handle, uint16_t const *p_handles, uint16_t handle_count));

/**@brief Perform a Write (Characteristic Value or Descriptor, with or without response, signed or not, long or reliable)
 * procedure.
 *
 * @details This function can perform all write procedures described in GATT.
 *
 * @note    Only one write with response procedure can be ongoing per connection at a time.
 *          If the application tries to write with response while another write with response procedure is ongoing,
 *          the function call will return @ref NRF_ERROR_BUSY.
 *          A @ref BLE_GATTC_EVT_WRITE_RSP event will be issued as soon as the write response arrives from the peer.
 *
 * @note    The number of Write without Response that can be queued is configured by @ref
 * ble_gattc_conn_cfg_t::write_cmd_tx_queue_size When the queue is full, the function call will return @ref NRF_ERROR_RESOURCES.
 *          A @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE event will be issued as soon as the transmission of the write without
 * response is complete.
 *
 * @note    The application can keep track of the available queue element count for writes without responses by following the
 * procedure below:
 *          - Store initial queue element count in a variable.
 *          - Decrement the variable, which stores the currently available queue element count, by one when a call to this
 * function returns @ref NRF_SUCCESS.
 *          - Increment the variable, which stores the current available queue element count, by the count variable in @ref
 * BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE event.
 *
 * @events
 * @event{@ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE, Write without response transmission complete.}
 * @event{@ref BLE_GATTC_EVT_WRITE_RSP, Write response received from the peer.}
 * @endevents
 *
 * @mscs
 * @mmsc{@ref BLE_GATTC_VALUE_WRITE_WITHOUT_RESP_MSC}
 * @mmsc{@ref BLE_GATTC_VALUE_WRITE_MSC}
 * @mmsc{@ref BLE_GATTC_VALUE_LONG_WRITE_MSC}
 * @mmsc{@ref BLE_GATTC_VALUE_RELIABLE_WRITE_MSC}
 * @endmscs
 *
 * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
 * @param[in] p_write_params A pointer to a write parameters structure.
 *
 * @retval ::NRF_SUCCESS Successfully started the Write procedure.
 * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
 * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State.
 * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
 * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
 * @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied.
 * @retval ::NRF_ERROR_BUSY For write with response, procedure already in progress. Wait for a @ref BLE_GATTC_EVT_WRITE_RSP event
 * and retry.
 * @retval ::NRF_ERROR_RESOURCES Too many writes without responses queued.
 *                               Wait for a @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE event and retry.
 * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without
 * reestablishing the connection.
 */
SVCALL(SD_BLE_GATTC_WRITE, uint32_t, sd_ble_gattc_write(uint16_t conn_handle, ble_gattc_write_params_t const *p_write_params));

/**@brief Send a Handle Value Confirmation to the GATT Server.
 *
 * @mscs
 * @mmsc{@ref BLE_GATTC_HVI_MSC}
 * @endmscs
 *
 * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
 * @param[in] handle The handle of the attribute in the indication.
 *
 * @retval ::NRF_SUCCESS Successfully queued the Handle Value Confirmation for transmission.
 * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
 * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State or no Indication pending to be confirmed.
 * @retval ::BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle.
 * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without
 * reestablishing the connection.
 */
SVCALL(SD_BLE_GATTC_HV_CONFIRM, uint32_t, sd_ble_gattc_hv_confirm(uint16_t conn_handle, uint16_t handle));

/**@brief Discovers information about a range of attributes on a GATT server.
 *
 * @events
 * @event{@ref BLE_GATTC_EVT_ATTR_INFO_DISC_RSP, Generated when information about a range of attributes has been received.}
 * @endevents
 *
 * @param[in] conn_handle    The connection handle identifying the connection to perform this procedure on.
 * @param[in] p_handle_range The range of handles to request information about.
 *
 * @retval ::NRF_SUCCESS Successfully started an attribute information discovery procedure.
 * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle.
 * @retval ::NRF_ERROR_INVALID_STATE Invalid connection state
 * @retval ::NRF_ERROR_INVALID_ADDR  Invalid pointer supplied.
 * @retval ::NRF_ERROR_BUSY Client procedure already in progress.
 * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without
 * reestablishing the connection.
 */
SVCALL(SD_BLE_GATTC_ATTR_INFO_DISCOVER, uint32_t,
       sd_ble_gattc_attr_info_discover(uint16_t conn_handle, ble_gattc_handle_range_t const *p_handle_range));

/**@brief Start an ATT_MTU exchange by sending an Exchange MTU Request to the server.
 *
 * @details The SoftDevice sets ATT_MTU to the minimum of:
 *          - The Client RX MTU value, and
 *          - The Server RX MTU value from @ref BLE_GATTC_EVT_EXCHANGE_MTU_RSP.
 *
 *          However, the SoftDevice never sets ATT_MTU lower than @ref BLE_GATT_ATT_MTU_DEFAULT.
 *
 * @events
 * @event{@ref BLE_GATTC_EVT_EXCHANGE_MTU_RSP}
 * @endevents
 *
 * @mscs
 * @mmsc{@ref BLE_GATTC_MTU_EXCHANGE}
 * @endmscs
 *
 * @param[in] conn_handle    The connection handle identifying the connection to perform this procedure on.
 * @param[in] client_rx_mtu  Client RX MTU size.
 *                           - The minimum value is @ref BLE_GATT_ATT_MTU_DEFAULT.
 *                           - The maximum value is @ref ble_gatt_conn_cfg_t::att_mtu in the connection configuration
                               used for this connection.
 *                           - The value must be equal to Server RX MTU size given in @ref sd_ble_gatts_exchange_mtu_reply
 *                             if an ATT_MTU exchange has already been performed in the other direction.
 *
 * @retval ::NRF_SUCCESS Successfully sent request to the server.
 * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle.
 * @retval ::NRF_ERROR_INVALID_STATE Invalid connection state or an ATT_MTU exchange was already requested once.
 * @retval ::NRF_ERROR_INVALID_PARAM Invalid Client RX MTU size supplied.
 * @retval ::NRF_ERROR_BUSY Client procedure already in progress.
 * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without
 reestablishing the connection.
 */
SVCALL(SD_BLE_GATTC_EXCHANGE_MTU_REQUEST, uint32_t,
       sd_ble_gattc_exchange_mtu_request(uint16_t conn_handle, uint16_t client_rx_mtu));

/**@brief Iterate through Handle-Value(s) list in @ref BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP event.
 *
 * @param[in] p_gattc_evt  Pointer to event buffer containing @ref BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP event.
 *                         @note If the buffer contains different event, behavior is undefined.
 * @param[in,out] p_iter   Iterator, points to @ref ble_gattc_handle_value_t structure that will be filled in with
 *                         the next Handle-Value pair in each iteration. If the function returns other than
 *                         @ref NRF_SUCCESS, it will not be changed.
 *                         - To start iteration, initialize the structure to zero.
 *                         - To continue, pass the value from previous iteration.
 *
 * \code
 * ble_gattc_handle_value_t iter;
 * memset(&iter, 0, sizeof(ble_gattc_handle_value_t));
 * while (sd_ble_gattc_evt_char_val_by_uuid_read_rsp_iter(&ble_evt.evt.gattc_evt, &iter) == NRF_SUCCESS)
 * {
 *   app_handle = iter.handle;
 *   memcpy(app_value, iter.p_value, ble_evt.evt.gattc_evt.params.char_val_by_uuid_read_rsp.value_len);
 * }
 * \endcode
 *
 * @retval ::NRF_SUCCESS Successfully retrieved the next Handle-Value pair.
 * @retval ::NRF_ERROR_NOT_FOUND No more Handle-Value pairs available in the list.
 */
__STATIC_INLINE uint32_t sd_ble_gattc_evt_char_val_by_uuid_read_rsp_iter(ble_gattc_evt_t *p_gattc_evt,
                                                                         ble_gattc_handle_value_t *p_iter);

/** @} */

#ifndef SUPPRESS_INLINE_IMPLEMENTATION

__STATIC_INLINE uint32_t sd_ble_gattc_evt_char_val_by_uuid_read_rsp_iter(ble_gattc_evt_t *p_gattc_evt,
                                                                         ble_gattc_handle_value_t *p_iter)
{
    uint32_t value_len = p_gattc_evt->params.char_val_by_uuid_read_rsp.value_len;
    uint8_t *p_first = p_gattc_evt->params.char_val_by_uuid_read_rsp.handle_value;
    uint8_t *p_next = p_iter->p_value ? p_iter->p_value + value_len : p_first;

    if ((p_next - p_first) / (sizeof(uint16_t) + value_len) < p_gattc_evt->params.char_val_by_uuid_read_rsp.count) {
        p_iter->handle = (uint16_t)p_next[1] << 8 | p_next[0];
        p_iter->p_value = p_next + sizeof(uint16_t);
        return NRF_SUCCESS;
    } else {
        return NRF_ERROR_NOT_FOUND;
    }
}

#endif /* SUPPRESS_INLINE_IMPLEMENTATION */

#ifdef __cplusplus
}
#endif
#endif /* BLE_GATTC_H__ */

/**
  @}
*/