mirror of
https://github.com/meshtastic/firmware.git
synced 2025-02-08 13:41:28 +00:00
d47e9bed19
This changeset gives us the ability to specify a separate SPI device for the LoRa, Display, and Touchscreen. The changes in Portduino also add support for specifying a new SPI speed for each transaction. All together, this means that we can let the Linux OS manage the CS lines, and also get much faster SPI speeds, leading to better framerates. * Add multiple SPI devices to put Radio, Display, and Touchscreen on each their own --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
130 lines
2.5 KiB
YAML
130 lines
2.5 KiB
YAML
### Define your devices here using Broadcom pin numbering
|
|
### Uncomment the block that corresponds to your hardware
|
|
### Including the "Module:" line!
|
|
---
|
|
Lora:
|
|
# Module: sx1262 # Waveshare SX126X XXXM
|
|
# DIO2_AS_RF_SWITCH: true
|
|
# CS: 21
|
|
# IRQ: 16
|
|
# Busy: 20
|
|
# Reset: 18
|
|
|
|
# Module: sx1262 # Waveshare SX1302 LISTEN ONLY AT THIS TIME!
|
|
# CS: 7
|
|
# IRQ: 17
|
|
# Reset: 22
|
|
|
|
# Module: sx1262 # pinedio
|
|
# CS: 0
|
|
# IRQ: 10
|
|
# Busy: 11
|
|
# spidev: spidev0.1
|
|
|
|
# Module: RF95 # Adafruit RFM9x
|
|
# Reset: 25
|
|
# CS: 7
|
|
# IRQ: 22
|
|
# Busy: 23
|
|
|
|
# Module: RF95 # Elecrow Lora RFM95 IOT https://www.elecrow.com/lora-rfm95-iot-board-for-rpi.html
|
|
# Reset: 22
|
|
# CS: 7
|
|
# IRQ: 25
|
|
|
|
# Module: sx1280 # SX1280
|
|
# CS: 21
|
|
# IRQ: 16
|
|
# Busy: 20
|
|
# Reset: 18
|
|
|
|
# DIO3_TCXO_VOLTAGE: true # the Waveshare Core1262 and others are known to need this setting
|
|
|
|
# TXen: x # TX and RX enable pins
|
|
# RXen: x
|
|
|
|
### Set gpio chip to use in /dev/. Defaults to 0.
|
|
### Notably the Raspberry Pi 5 puts the GPIO header on gpiochip4
|
|
# gpiochip: 4
|
|
|
|
### Specify the SPI device to use in /dev/. Defaults to spidev0.0
|
|
### Some devices, like the pinedio, may require spidev0.1 as a workaround.
|
|
# spidev: spidev0.0
|
|
|
|
### Define GPIO buttons here:
|
|
|
|
GPIO:
|
|
# User: 6
|
|
|
|
### Define GPS
|
|
|
|
GPS:
|
|
# SerialPath: /dev/ttyS0
|
|
|
|
### Specify I2C device, or leave blank for none
|
|
|
|
I2C:
|
|
# I2CDevice: /dev/i2c-1
|
|
|
|
### Set up SPI displays here. Note that I2C displays are generally auto-detected.
|
|
|
|
Display:
|
|
|
|
### Waveshare 2.8inch RPi LCD
|
|
# Panel: ST7789
|
|
# CS: 8
|
|
# DC: 22 # Data/Command pin
|
|
# Backlight: 18
|
|
# Width: 240
|
|
# Height: 320
|
|
# Reset: 27
|
|
# Rotate: true
|
|
# Invert: true
|
|
|
|
### Waveshare 1.44inch LCD HAT
|
|
# Panel: ST7735S
|
|
# CS: 8 #Chip Select
|
|
# DC: 25 # Data/Command pin
|
|
# Backlight: 24
|
|
# Width: 128
|
|
# Height: 128
|
|
# Reset: 27
|
|
# OffsetX: 0
|
|
# OffsetY: 0
|
|
|
|
### Adafruit PiTFT 2.8 TFT+Touchscreen
|
|
# Panel: ILI9341
|
|
# CS: 8
|
|
# DC: 25
|
|
# Backlight: 2
|
|
# Width: 320
|
|
# Height: 240
|
|
|
|
Touchscreen:
|
|
### Note, at least for now, the touchscreen must have a CS pin defined, even if you let Linux manage the CS switching.
|
|
|
|
# Module: STMPE610
|
|
# CS: 7
|
|
# IRQ: 24
|
|
|
|
# Module: XPT2046 # Waveshare 2.8inch
|
|
# CS: 7
|
|
# IRQ: 17
|
|
|
|
### Configure device for direct keyboard input
|
|
|
|
Input:
|
|
# KeyboardDevice: /dev/input/by-id/usb-_Raspberry_Pi_Internal_Keyboard-event-kbd
|
|
|
|
###
|
|
|
|
Logging:
|
|
LogLevel: info # debug, info, warn, error
|
|
|
|
Webserver:
|
|
# Port: 443 # Port for Webserver & Webservices
|
|
# RootPath: /usr/share/doc/meshtasticd/web # Root Dir of WebServer
|
|
|
|
General:
|
|
MaxNodes: 200
|