mirror of
https://github.com/meshtastic/firmware.git
synced 2025-02-08 21:51:46 +00:00
3fa8b357e5
* Fix for serial monitoring and I2C for Vision Master e213 (#4280) * Fix for serial monitoring and I2C The board did not allow serial monitoring while on boot mode, i was able to fix this by adding a board variant. I also corrected the i2c pins. I was able to test it with a cardkb * oops I delete some code by mistake, all back now * Made some adjustments * Minimize the diff --------- Co-authored-by: Todd Herbert <herbert.todd@gmail.com> * Don't redefine board identifier Suppresses compiler warnings * Detect Vision Master 213 with PIO serial monitor * Use outermost button as user-button Less chance of accidentally hitting reset * Use 1200bps touch (213) Allows upload without manually entering bootloader --------- Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
58 lines
1.3 KiB
C
58 lines
1.3 KiB
C
// #define LED_PIN 18
|
|
|
|
// Enable bus for external periherals
|
|
#define I2C_SDA SDA
|
|
#define I2C_SCL SCL
|
|
|
|
#define USE_EINK
|
|
|
|
/*
|
|
* eink display pins
|
|
*/
|
|
#define PIN_EINK_CS 3
|
|
#define PIN_EINK_BUSY 5
|
|
#define PIN_EINK_DC 4
|
|
#define PIN_EINK_RES 5
|
|
#define PIN_EINK_SCLK 2
|
|
#define PIN_EINK_MOSI 1
|
|
|
|
/*
|
|
* SPI interfaces
|
|
*/
|
|
#define SPI_INTERFACES_COUNT 2
|
|
|
|
#define PIN_SPI_MISO 10 // MISO
|
|
#define PIN_SPI_MOSI 11 // MOSI
|
|
#define PIN_SPI_SCK 9 // SCK
|
|
|
|
#define VEXT_ENABLE 18 // powers the e-ink display
|
|
#define VEXT_ON_VALUE 1
|
|
#define BUTTON_PIN 0
|
|
|
|
#define ADC_CTRL 46
|
|
#define ADC_CTRL_ENABLED HIGH
|
|
#define BATTERY_PIN 7
|
|
#define ADC_CHANNEL ADC1_GPIO7_CHANNEL
|
|
#define ADC_MULTIPLIER 4.9 * 1.03
|
|
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // Voltage divider output is quite high
|
|
|
|
#define USE_SX1262
|
|
|
|
#define LORA_DIO0 -1 // a No connect on the SX1262 module
|
|
#define LORA_RESET 12
|
|
#define LORA_DIO1 14 // SX1262 IRQ
|
|
#define LORA_DIO2 13 // SX1262 BUSY
|
|
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
|
|
|
|
#define LORA_SCK 9
|
|
#define LORA_MISO 11
|
|
#define LORA_MOSI 10
|
|
#define LORA_CS 8
|
|
|
|
#define SX126X_CS LORA_CS
|
|
#define SX126X_DIO1 LORA_DIO1
|
|
#define SX126X_BUSY LORA_DIO2
|
|
#define SX126X_RESET LORA_RESET
|
|
|
|
#define SX126X_DIO2_AS_RF_SWITCH
|
|
#define SX126X_DIO3_TCXO_VOLTAGE 1.8 |