firmware/variants
Andrew Yong fd414ed149
feat: DIY Seeed XIAO nRF52840 + EBYTE E22 variants, pin-compatible with Wio-SX1262 kit (#7105)
These DIY builds are functionally similar to the legacy xiao_ble variant, but use a pinout harmonized with the officially-supported XIAO nRF52840 & Wio-SX1262 Kit for Meshtastic (SKU 102010710).

An additional E22-900M33S variant is provided to ensure SX1262 transmit power is set below the maximum PA input for that module, to avoid damaging it.

- seeed_xiao_nrf52840_e22_900m30s:
  - XIAO nRF52840 + EBYTE E22-900M30S
  - EBYTE E22 pinout matching Wio-SX1262 (SKU 113010003)
  - I2C
    - SDA: D6
    - SCL: D7
  - User button: D0
  - Gain is programmed in firmware - user Tx power setting is the desired final output power
- seeed_xiao_nrf52840_e22_900m33s:
  - XIAO nRF52840 + EBYTE E22-900M33S
  - EBYTE E22 pinout matching Wio-SX1262 (SKU 113010003)
  - I2C
    - SDA: D6
    - SCL: D7
  - User button: D0
  - Gain is programmed in firmware - user Tx power setting is the desired final output power

Signed-off-by: Andrew Yong <me@ndoo.sg>
2025-07-13 15:58:01 +08:00
..
ai-c3
betafpv_900_tx_nano
betafpv_2400_tx_micro
bpi_picow_esp32_s3
canaryone update bosch bsec2 (#6727) 2025-05-05 06:03:36 -05:00
CDEBYTE_E77-MBL
CDEBYTE_EoRa-S3
chatter2
crowpanel-esp32s3-5-epaper Update platformio.ini (#6512) 2025-04-07 07:04:31 -05:00
diy feat: DIY Seeed XIAO nRF52840 + EBYTE E22 variants, pin-compatible with Wio-SX1262 kit (#7105) 2025-07-13 15:58:01 +08:00
Dongle_nRF52840-pca10059-v1 update bosch bsec2 (#6727) 2025-05-05 06:03:36 -05:00
dreamcatcher
EBYTE_ESP32-S3
ec_catsniffer update bosch bsec2 (#6727) 2025-05-05 06:03:36 -05:00
elecrow_panel Add customizable boot logo based on resolution (#7146) 2025-07-02 11:53:12 -07:00
ELECROW-ThinkNode-M1 Shorter audio feedback for InkHUD buttons (#7301) 2025-07-11 17:30:48 +12:00
ELECROW-ThinkNode-M2 Unify the native display config between legacy display and MUI (#6838) 2025-06-21 06:36:04 -05:00
esp32-s3-pico
feather_diy update bosch bsec2 (#6727) 2025-05-05 06:03:36 -05:00
feather_rp2040_rfm95 update bosch bsec2 (#6727) 2025-05-05 06:03:36 -05:00
gat562_mesh_trial_tracker add support for GAT562 Mesh Trial Tracker (#6984) 2025-06-13 17:27:48 +10:00
hackerboxes_esp32_io
hackerboxes_esp32c3_oled Adding Variants for Hackerboxes ESP32C3 OLED kit and the ESP32 IO Kit (#6319) 2025-03-25 22:57:06 +01:00
heltec_capsule_sensor_v3 Unify the native display config between legacy display and MUI (#6838) 2025-06-21 06:36:04 -05:00
heltec_esp32c3
heltec_hru_3601 Add support for Heltec HRU-3601 2024-06-20 12:30:02 +08:00
heltec_mesh_node_t114 2.7 fixes w2 (#7148) 2025-07-02 20:50:49 -05:00
heltec_mesh_node_t114-inkhud Additional larger font for InkHUD UI (#7201) 2025-07-02 19:18:34 -05:00
heltec_mesh_pocket Additional larger font for InkHUD UI (#7201) 2025-07-02 19:18:34 -05:00
heltec_sensor_hub Unify the native display config between legacy display and MUI (#6838) 2025-06-21 06:36:04 -05:00
heltec_v1 Add ADC channels to esp variants, plug code back in to make sure other archs work 2023-05-16 21:46:55 +02:00
heltec_v2 I thought these were already board level extra 2024-10-16 07:34:24 -05:00
heltec_v2.1
heltec_v3 Increase MAX_NUM_NODES on high-flash ESP32_S3 (#6311) 2025-03-18 20:19:51 -05:00
heltec_vision_master_e213 Shorter audio feedback for InkHUD buttons (#7301) 2025-07-11 17:30:48 +12:00
heltec_vision_master_e290 Shorter audio feedback for InkHUD buttons (#7301) 2025-07-11 17:30:48 +12:00
heltec_vision_master_t190 Unify the native display config between legacy display and MUI (#6838) 2025-06-21 06:36:04 -05:00
heltec_wireless_bridge Improve support for Heltec Wireless Bridge (#6647) 2025-06-10 13:54:07 +10:00
heltec_wireless_paper Heltec Wireless Paper, VM-E213 Hardware Revisions (#7258) 2025-07-08 13:01:48 -05:00
heltec_wireless_paper_v1 Fixes BUG #6243 Heltec Tracker (#6781) 2025-05-14 06:29:05 -05:00
heltec_wireless_tracker
heltec_wireless_tracker_V1_0
heltec_wsl_v2.1
heltec_wsl_v3 Increase MAX_NUM_NODES on high-flash ESP32_S3 (#6311) 2025-03-18 20:19:51 -05:00
icarus
link32_s3_v1 Unify the native display config between legacy display and MUI (#6838) 2025-06-21 06:36:04 -05:00
m5stack_core
m5stack_coreink
m5stack_cores3
m5stack-stamp-c3
MakePython_nRF52840_eink update bosch bsec2 (#6727) 2025-05-05 06:03:36 -05:00
MakePython_nRF52840_oled update bosch bsec2 (#6727) 2025-05-05 06:03:36 -05:00
ME25LS01-4Y10TD update bosch bsec2 (#6727) 2025-05-05 06:03:36 -05:00
ME25LS01-4Y10TD_e-ink update bosch bsec2 (#6727) 2025-05-05 06:03:36 -05:00
mesh-tab Add customizable boot logo based on resolution (#7146) 2025-07-02 11:53:12 -07:00
meshlink update bosch bsec2 (#6727) 2025-05-05 06:03:36 -05:00
meshlink_eink update bosch bsec2 (#6727) 2025-05-05 06:03:36 -05:00
monteops_hw1 update bosch bsec2 (#6727) 2025-05-05 06:03:36 -05:00
MS24SF1 update bosch bsec2 (#6727) 2025-05-05 06:03:36 -05:00
my_esp32s3_diy_eink
my_esp32s3_diy_oled
nano-g1 Unify the native display config between legacy display and MUI (#6838) 2025-06-21 06:36:04 -05:00
nano-g1-explorer Unify the native display config between legacy display and MUI (#6838) 2025-06-21 06:36:04 -05:00
nano-g2-ultra update bosch bsec2 (#6727) 2025-05-05 06:03:36 -05:00
nibble_esp32
nibble_rp2040 update bosch bsec2 (#6727) 2025-05-05 06:03:36 -05:00
nugget_s2_lora
nugget_s3_lora Fix nugget s3 lora variant issues (#7070) 2025-06-19 18:48:22 -05:00
picomputer-s3 2.7 fixes w2 (#7148) 2025-07-02 20:50:49 -05:00
portduino 2.7 Miscellaneous Fixes - Week 1 (#7102) 2025-06-26 22:11:20 -05:00
portduino-buildroot
radiomaster_900_bandit
radiomaster_900_bandit_micro
radiomaster_900_bandit_nano
rak2560 update bosch bsec2 (#6727) 2025-05-05 06:03:36 -05:00
rak3172 Enable telemetry and I2C sensors on STM32WL (except accelerometers) (#7008) 2025-07-02 06:01:45 -05:00
rak3312 feat: add support for RAK3312 (New RAKwireless wiscore ESP32-S3 + SX1262) (#7115) 2025-07-02 06:03:42 -05:00
rak4631 2.7 Miscellaneous Fixes - Week 1 (#7102) 2025-06-26 22:11:20 -05:00
rak4631_epaper Add rak12035 VB Soil Monitor Tested & Working (#6741) 2025-06-19 18:51:03 -05:00
rak4631_epaper_onrxtx Add rak12035 VB Soil Monitor Tested & Working (#6741) 2025-06-19 18:51:03 -05:00
rak4631_eth_gw Add rak12035 VB Soil Monitor Tested & Working (#6741) 2025-06-19 18:51:03 -05:00
rak4631_nomadstar_meteor_pro [Variant] nomadstar meteor pro (#6742) 2025-06-10 07:48:52 +10:00
rak11200
rak11310 update bosch bsec2 (#6727) 2025-05-05 06:03:36 -05:00
rak_wismeshtap Add rak12035 VB Soil Monitor Tested & Working (#6741) 2025-06-19 18:51:03 -05:00
rp2040-lora update bosch bsec2 (#6727) 2025-05-05 06:03:36 -05:00
rpipico update bosch bsec2 (#6727) 2025-05-05 06:03:36 -05:00
rpipico2 update bosch bsec2 (#6727) 2025-05-05 06:03:36 -05:00
rpipico2w update bosch bsec2 (#6727) 2025-05-05 06:03:36 -05:00
rpipico-slowclock update bosch bsec2 (#6727) 2025-05-05 06:03:36 -05:00
rpipicow update bosch bsec2 (#6727) 2025-05-05 06:03:36 -05:00
seeed_solar_node update seeed solar node led pin (#6871) 2025-05-23 08:04:17 -05:00
seeed_wio_tracker_L1 Make the 4-way on the L1 work on press instead of release (#7108) 2025-06-22 20:57:39 -05:00
seeed_wio_tracker_L1_eink Additional larger font for InkHUD UI (#7201) 2025-07-02 19:18:34 -05:00
seeed_xiao_nrf52840_kit Update platformio.ini (#7289) 2025-07-10 17:11:19 -05:00
seeed_xiao_s3
seeed-sensecap-indicator Add customizable boot logo based on resolution (#7146) 2025-07-02 11:53:12 -07:00
senselora_rp2040 update bosch bsec2 (#6727) 2025-05-05 06:03:36 -05:00
station-g1 Unify the native display config between legacy display and MUI (#6838) 2025-06-21 06:36:04 -05:00
station-g2
t-deck Key verification flow on BaseUI (#7240) 2025-07-10 09:45:36 -05:00
t-echo Additional larger font for InkHUD UI (#7201) 2025-07-02 19:18:34 -05:00
t-eth-elite
t-watch-s3 Crowpanel 4.3, 5.0, 7.0 support (#6611) 2025-05-13 14:15:52 +02:00
tbeam Unify the native display config between legacy display and MUI (#6838) 2025-06-21 06:36:04 -05:00
tbeam_v07
tbeam-s3-core Unify the native display config between legacy display and MUI (#6838) 2025-06-21 06:36:04 -05:00
tlora_c6 update bosch bsec2 (#6727) 2025-05-05 06:03:36 -05:00
tlora_t3s3_epaper Additional larger font for InkHUD UI (#7201) 2025-07-02 19:18:34 -05:00
tlora_t3s3_v1
tlora_v1 fix: set upload_speed for tlora_v1 (#6601) 2025-04-16 06:15:16 -05:00
tlora_v1_3 fix: set upload_speed for tlora_v1_3 & tlora_v2_1_16 (#6595) 2025-04-15 20:39:13 -05:00
tlora_v2
tlora_v2_1_16 fix: set upload_speed for tlora_v1_3 & tlora_v2_1_16 (#6595) 2025-04-15 20:39:13 -05:00
tlora_v2_1_16_tcxo fix: set upload_speed for tlora_v1_3 & tlora_v2_1_16 (#6595) 2025-04-15 20:39:13 -05:00
tlora_v2_1_18
tlora_v3_3_0_tcxo
tracker-t1000-e update bosch bsec2 (#6727) 2025-05-05 06:03:36 -05:00
trackerd
tracksenger 2.7 fixes w2 (#7148) 2025-07-02 20:50:49 -05:00
TWC_mesh_v4
unphone Add customizable boot logo based on resolution (#7146) 2025-07-02 11:53:12 -07:00
wio-e5 Enable telemetry and I2C sensors on STM32WL (except accelerometers) (#7008) 2025-07-02 06:01:45 -05:00
wio-sdk-wm1110 update bosch bsec2 (#6727) 2025-05-05 06:03:36 -05:00
wio-t1000-s update bosch bsec2 (#6727) 2025-05-05 06:03:36 -05:00
wio-tracker-wm1110 update bosch bsec2 (#6727) 2025-05-05 06:03:36 -05:00
wiphone Fix WiPhone variant.h (#6664) 2025-04-24 20:40:48 -05:00