mirror of
https://github.com/meshtastic/firmware.git
synced 2025-08-11 07:57:22 +00:00
4feaec651f
* Add missed include * Another Warning fix * Add another HAS_SCREEN * Namespace fixes * Removed depricated destination types and re-factored destination screen * Get rid of Arduino Strings * Clean up after Copilot * SixthLine Def, Screen Rename Added Sixth Line Definition Screen Rename, and Automatic Line Adjustment * Consistency is hard - fixed "Sixth" * System Frame Updates Adjusted line construction to ensure we fit maximum content per screen. * Fix up notifications * Add a couple more ifdef HAS_SCREEN lines * Add screen->isOverlayBannerShowing() * Don't forget the invert! * Adjust Nodelist Center Divider Adjust Nodelist Center Divider * Fix variable casting * Fix entryText variable as empty before update to fix validation * Altitude is int32_t * Update PowerTelemetry to have correct data type * Fix cppcheck warnings (#6945) * Fix cppcheck warnings * Adjust logic in Power.cpp for power sensor --------- Co-authored-by: Jason P <applewiz@mac.com> * More pixel wrangling so things line up NodeList edition * Adjust NodeList alignments and plumb some background padding for a possible title fix * Better alignment for banner notifications * Move title into drawCommonHeader; initial screen tested * Fonts make spacing items difficult * Improved beeping booping and other buzzer based feedback (#6947) * Improved beeping booping and other buzzer based feedback * audible button feedback (#6949) * Refactor --------- Co-authored-by: todd-herbert <herbert.todd@gmail.com> * Sandpapered the corners of the notification popup * Finalize drawCommonHeader migration * Update Title of Favorite Node Screens * Update node metric alignment on LoRa screen * Update the border for popups to separate it from background * Update PaxcounterModule.cpp with CommonHeader * Update WiFi screen with CommonHeader and related data reflow * It was not, in fact, pointing up * Fix build on wismeshtap * T-deck trackball debounce * Fix uptime on Device Focused page to actually detail * Update Sys screen for new uptime, add label to Freq/Chan on LoRa * Don't display DOP any longer, make Uptime consistent * Revert Uptime change on Favorites, Apply to Device Focused * Label the satelite number to avoid confusion * Boop boop boop boop * Correct GPS positioning and string consistency across strings for GPS * Fix GPS text alignment * Enable canned messages by default * Don't wake screen on new nodes * Cannedmessage list emote support added * Fn+e emote picker for freetext screen * Actually block CannedInput actions while display is shown * Add selection menu to bannerOverlay * Off by one * Move to unified text layouts and spacing * Still my Fav without an "e" * Fully remove EVENT_NODEDB_UPDATED * Simply LoRa screen * Make some char pointers const to fix compilation on native targets * Update drawCompassNorth to include radius * Fix warning * button thread cleanup * Pull OneButton handling from PowerFSM and add MUI switch (#6973) * Trunk * Onebutton Menu Support * Add temporary clock icon * Add gps location to fsi * Banner message state reset * Cast to char to satisfy compiler * Better fast handling of input during banner * Fix warning * Derp * oops * Update ref * Wire buzzer_mode * remove legacy string->print() * Only init screen if one found * Unsigned Char * More buttonThread cleaning * screen.cpp button handling cleanup * The Great Event Rename of 2025 * Fix the Radiomaster * Missed trackball type change * Remove unused function * Make ButtonThread an InputBroker * Coffee hadn't kicked in yet * Add clock icon for Navigation Bar * Restore clock screen definition code - whoops * ExternalNotifications now observe inputBroker * Clock rework (#6992) * Move Clock bits into ClockRenderer space * Rework clock into all device navigation * T-Watch Actually Builds Different * Compile fix --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> * Add AM/PM to Digital Clock * Flip Seconds and AM/PM on Clock Display * Tik-tok pixels are hard * Fix builds on Thinknode M1 * Check for GPS and don't crash * Don't endif til the end * Rework the OneButton thread to be much less of a mess. (#6997) * Rework the OneButton thread to be much less of a mess. And break lots of targets temporarily * Update src/input/ButtonThread.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * fix GPS toggle * Send the shutdown event, not just the kbchar * Honor the back button in a notificaiton popup * Draw the right size box for popup with options * Try to un-break all the things --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * 24-hour Clock Should have leading zero, but not 12-hour * Fixup some compile errors * Add intRoutine to ButtonThread init, to get more responsive user button back * Add Timezone picker * Fix Warning * Optionally set the initial selection for the chooser popup * Make back buttons work in canned messages * Drop the wrapper classes * LonPressTime now configurable * Clock Frame can not longer be blank; just add valid time * Back buttons everywhere! * Key Verification confirm banner * Make Elecrow M* top button a back button * Add settings saves * EInk responsiveness fixes * Linux Input Fixes * Add Native Trackball/Joystick support, and move UserButton to Input * No Flight Stick Mode * Send input event * Add Channel Utilization to Device Focused frame * Don't shift screens when we draw new ones * Add showOverlayBanner arguments to no-op * trunk * Default Native trackball to NC * Fix crash in simulator mode * Add longLong button press * Get the args right * Adjust Bluetooth Pairing Screen to account for bottom navigation. * Trackball everywhere, and unPhone buttons * Remap visionmaster secondary button to TB_UP * Kill ScanAndSelect * trunk * No longer need the canned messages input filter * All Canned All the time * Fix stm32 compile error regarding inputBroker * Unify tft lineheights (#7033) * Create variable line heights based upon SCREEN_HEIGHT * Refactor textPositions into method -> getTextPositions * Update SharedUIDisplay.h --------- Co-authored-by: Jason P <applewiz@mac.com> * Adjust top distance for larger displays * Adjust icon sizes for larger displays * Fix Paxcounter compile errors after code updates * Pixel wrangling to make larger screens fit better * Alert frame has precedence over banner -- for now * Unify on ALT_BUTTON * Align AM/PM to the digit, not the segment on larger displays * Move some global pin defines into configuration.h * Scaffolding for BMM150 9-axis gyro * Alt button behavior * Don't add the blank GPS frames without HAS_GPS * EVENT_NODEDB_UPDATED has been retired * Clean out LOG_WARN messages from debugging * Add dismiss message function * Minor buttonThread cleanup * Add BMM150 support * Clean up last warning from dev * Simplify bmm150 init return logic * Add option to reply to messages * Add minimal menu upon selecting home screen * Move Messages to slot 2, rename GPS to Position, move variables nearer functional usage in Screen.cpp * Properly dismiss message * T-Deck Trackball press is not user button * Add select on favorite frame to launch cannedMessage DM * Minor wording change * Less capital letters * Fix empty message check, time isn't reliable * drop dead code * Make UIRenderer a static class instead of namespace * Fix the select on favorite * Check if message is empty early and then 'return' * Add kb_found, and show the option to launch freetype if appropriate * Ignore impossible touchscreen touches * Auto scroll fix * Move linebreak after "from" for banners to maximize screen usage. * Center "No messages to show" on Message frame * Start consolidating buzzer behavior * Fixed signed / unsigned warning * Cast second parameter of max() to make some targets happy * Cast kbchar to (char) to make arduino string happy * Shorten the notice of "No messages" * Add buzzer mode chooser * Add regionPicker to Lora icon * Reduce line spacing and reorder Position screen to resolve overlapping issues * Update message titles, fix GPS icons, add Back options * Leftover boops * Remove chirp * Make the region selection dismissable when a region is already set * Add read-aloud functionality on messages w/ esp8266sam * "Last Heard" is a better label * tweak the beep * 5 options * properly tear down freetext upon cancel * de-convelute canned messages just a bit * Correct height of Mail icon in navigation bar * Remove unused warning * Consolidate time methods into TimeFormatters * Oops * Change LoRa Picker Cancel to Back * Tweak selection characters on Banner * Message render not scrolling on 5th line * More fixes for message scrolling * Remove the safety next on text overflow - we found that root cause * Add pin definitions to fix compilation for obscure target * Don't let the touchscreen send unitialized kbchar values * Make virtual KB just a bit quicker * No more double tap, swipe! * Left is left, and Right is right * Update horizontal lightning bolt design * Move from solid to dashed separator for Message Frame * Single emote feature fix * Manually sort overlapping elements for now * Freetext and clearer choices * Fix ESP32 InkHUD builds on the unify-tft branch (#7087) * Remove BaseUI branding * Capitalization is fun * Revert Meshtastic Boot Frame Changes * Add ANZ_433 LoRa region to picker * Update settings.json --------- Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Jason P <applewiz@mac.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
461 lines
13 KiB
C
461 lines
13 KiB
C
/*
|
|
|
|
TTGO T-BEAM Tracker for The Things Network
|
|
|
|
Copyright (C) 2018 by Xose Pérez <xose dot perez at gmail dot com>
|
|
|
|
This code requires LMIC library by Matthijs Kooijman
|
|
https://github.com/matthijskooijman/arduino-lmic
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#include <Arduino.h>
|
|
|
|
#ifdef RV3028_RTC
|
|
#include "Melopero_RV3028.h"
|
|
#endif
|
|
#ifdef PCF8563_RTC
|
|
#include "pcf8563.h"
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// Version
|
|
// -----------------------------------------------------------------------------
|
|
|
|
// If app version is not specified we assume we are not being invoked by the build script
|
|
#ifndef APP_VERSION
|
|
#error APP_VERSION must be set by the build environment
|
|
#endif
|
|
|
|
// FIXME: This is still needed by the Bluetooth Stack and needs to be replaced by something better. Remnant of the old versioning
|
|
// system.
|
|
#ifndef HW_VERSION
|
|
#define HW_VERSION "1.0"
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// Configuration
|
|
// -----------------------------------------------------------------------------
|
|
|
|
/// Convert a preprocessor name into a quoted string
|
|
#define xstr(s) ystr(s)
|
|
#define ystr(s) #s
|
|
|
|
/// Convert a preprocessor name into a quoted string and if that string is empty use "unset"
|
|
#define optstr(s) (xstr(s)[0] ? xstr(s) : "unset")
|
|
|
|
// Nop definition for these attributes that are specific to ESP32
|
|
#ifndef EXT_RAM_ATTR
|
|
#define EXT_RAM_ATTR
|
|
#endif
|
|
#ifndef IRAM_ATTR
|
|
#define IRAM_ATTR
|
|
#endif
|
|
#ifndef RTC_DATA_ATTR
|
|
#define RTC_DATA_ATTR
|
|
#endif
|
|
#ifndef EXT_RAM_BSS_ATTR
|
|
#define EXT_RAM_BSS_ATTR EXT_RAM_ATTR
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// Regulatory overrides
|
|
// -----------------------------------------------------------------------------
|
|
|
|
// Override user saved region, for producing region-locked builds
|
|
// #define REGULATORY_LORA_REGIONCODE meshtastic_Config_LoRaConfig_RegionCode_SG_923
|
|
|
|
// Total system gain in dBm to subtract from Tx power to remain within regulatory and Tx PA limits
|
|
// The value consists of PA gain + antenna gain (if variant has a non-removable antenna)
|
|
// TX_GAIN_LORA should be set with definitions below for common modules, or in variant.h.
|
|
|
|
// Gain for common modules with transmit PAs
|
|
#ifdef EBYTE_E22_900M30S
|
|
// 10dB PA gain and 30dB rated output; based on measurements from
|
|
// https://github.com/S5NC/EBYTE_ESP32-S3/blob/main/E22-900M30S%20power%20output%20testing.txt
|
|
#define TX_GAIN_LORA 7
|
|
#define SX126X_MAX_POWER 22
|
|
#endif
|
|
|
|
#ifdef EBYTE_E22_900M33S
|
|
// 25dB PA gain and 33dB rated output; based on TX Power Curve from E22-900M33S_UserManual_EN_v1.0.pdf
|
|
#define TX_GAIN_LORA 25
|
|
#define SX126X_MAX_POWER 8
|
|
#endif
|
|
|
|
#ifdef NICERF_MINIF27
|
|
// Note that datasheet power level of 9 corresponds with SX1262 at 22dBm
|
|
// Maximum output power of 29dBm with VCC_PA = 5V
|
|
#define TX_GAIN_LORA 7
|
|
#define SX126X_MAX_POWER 22
|
|
#endif
|
|
|
|
#ifdef NICERF_F30_HF
|
|
// Maximum output power of 29.6dBm with VCC = 5V and SX1262 at 22dBm
|
|
#define TX_GAIN_LORA 8
|
|
#define SX126X_MAX_POWER 22
|
|
#endif
|
|
|
|
#ifdef NICERF_F30_LF
|
|
// Maximum output power of 32.0dBm with VCC = 5V and SX1262 at 22dBm
|
|
#define TX_GAIN_LORA 10
|
|
#define SX126X_MAX_POWER 22
|
|
#endif
|
|
|
|
// Default system gain to 0 if not defined
|
|
#ifndef TX_GAIN_LORA
|
|
#define TX_GAIN_LORA 0
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// Feature toggles
|
|
// -----------------------------------------------------------------------------
|
|
|
|
// Disable use of the NTP library and related features
|
|
// #define DISABLE_NTP
|
|
|
|
// Disable the welcome screen and allow
|
|
// #define DISABLE_WELCOME_UNSET
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// OLED & Input
|
|
// -----------------------------------------------------------------------------
|
|
#if defined(SEEED_WIO_TRACKER_L1)
|
|
#define SSD1306_ADDRESS 0x3D
|
|
#define USE_SH1106
|
|
#else
|
|
#define SSD1306_ADDRESS 0x3C
|
|
#endif
|
|
#define ST7567_ADDRESS 0x3F
|
|
|
|
// The SH1106 controller is almost, but not quite, the same as SSD1306
|
|
// Define this if you know you have that controller or your "SSD1306" misbehaves.
|
|
// #define USE_SH1106
|
|
|
|
// Define if screen should be mirrored left to right
|
|
// #define SCREEN_MIRROR
|
|
|
|
// I2C Keyboards (M5Stack, RAK14004, T-Deck)
|
|
#define CARDKB_ADDR 0x5F
|
|
#define TDECK_KB_ADDR 0x55
|
|
#define BBQ10_KB_ADDR 0x1F
|
|
#define MPR121_KB_ADDR 0x5A
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// SENSOR
|
|
// -----------------------------------------------------------------------------
|
|
#define BME_ADDR 0x76
|
|
#define BME_ADDR_ALTERNATE 0x77
|
|
#define MCP9808_ADDR 0x18
|
|
#define INA_ADDR 0x40
|
|
#define INA_ADDR_ALTERNATE 0x41
|
|
#define INA_ADDR_WAVESHARE_UPS 0x43
|
|
#define INA3221_ADDR 0x42
|
|
#define MAX1704X_ADDR 0x36
|
|
#define QMC6310_ADDR 0x1C
|
|
#define QMI8658_ADDR 0x6B
|
|
#define QMC5883L_ADDR 0x0D
|
|
#define HMC5883L_ADDR 0x1E
|
|
#define SHTC3_ADDR 0x70
|
|
#define LPS22HB_ADDR 0x5C
|
|
#define LPS22HB_ADDR_ALT 0x5D
|
|
#define SHT31_4x_ADDR 0x44
|
|
#define SHT31_4x_ADDR_ALT 0x45
|
|
#define PMSA0031_ADDR 0x12
|
|
#define QMA6100P_ADDR 0x12
|
|
#define AHT10_ADDR 0x38
|
|
#define RCWL9620_ADDR 0x57
|
|
#define VEML7700_ADDR 0x10
|
|
#define TSL25911_ADDR 0x29
|
|
#define OPT3001_ADDR 0x45
|
|
#define OPT3001_ADDR_ALT 0x44
|
|
#define MLX90632_ADDR 0x3A
|
|
#define DFROBOT_LARK_ADDR 0x42
|
|
#define DFROBOT_RAIN_ADDR 0x1d
|
|
#define NAU7802_ADDR 0x2A
|
|
#define MAX30102_ADDR 0x57
|
|
#define MLX90614_ADDR_DEF 0x5A
|
|
#define CGRADSENS_ADDR 0x66
|
|
#define LTR390UV_ADDR 0x53
|
|
#define XPOWERS_AXP192_AXP2101_ADDRESS 0x34 // same adress as TCA8418
|
|
#define PCT2075_ADDR 0x37
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// ACCELEROMETER
|
|
// -----------------------------------------------------------------------------
|
|
#define MPU6050_ADDR 0x68
|
|
#define STK8BXX_ADDR 0x18
|
|
#define LIS3DH_ADDR 0x18
|
|
#define LIS3DH_ADDR_ALT 0x19
|
|
#define BMA423_ADDR 0x19
|
|
#define LSM6DS3_ADDR 0x6A
|
|
#define BMX160_ADDR 0x69
|
|
#define ICM20948_ADDR 0x69
|
|
#define ICM20948_ADDR_ALT 0x68
|
|
#define BMM150_ADDR 0x13
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// LED
|
|
// -----------------------------------------------------------------------------
|
|
#define NCP5623_ADDR 0x38
|
|
#define LP5562_ADDR 0x30
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// Security
|
|
// -----------------------------------------------------------------------------
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// IO Expander
|
|
// -----------------------------------------------------------------------------
|
|
#define TCA9535_ADDR 0x20
|
|
#define TCA9555_ADDR 0x26
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// Touchscreen
|
|
// -----------------------------------------------------------------------------
|
|
#define FT6336U_ADDR 0x48
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// RAK12035VB Soil Monitor (using RAK12023 up to 3 RAK12035 monitors can be connected)
|
|
// - the default i2c address for this sensor is 0x20, and users are instructed to
|
|
// set 0x21 and 0x22 for the second and third sensor if present.
|
|
// -----------------------------------------------------------------------------
|
|
#define RAK120351_ADDR 0x20
|
|
#define RAK120352_ADDR 0x21
|
|
#define RAK120353_ADDR 0x22
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// BIAS-T Generator
|
|
// -----------------------------------------------------------------------------
|
|
#define TPS65233_ADDR 0x60
|
|
|
|
// convert 24-bit color to 16-bit (56K)
|
|
#define COLOR565(r, g, b) (((r & 0xF8) << 8) | ((g & 0xFC) << 3) | ((b & 0xF8) >> 3))
|
|
|
|
/* Step #1: offer chance for variant-specific defines */
|
|
#include "variant.h"
|
|
|
|
#if defined(VEXT_ENABLE) && !defined(VEXT_ON_VALUE)
|
|
// Older variant.h files might not be defining this value, so stay with the old default
|
|
#define VEXT_ON_VALUE LOW
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// GPS
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#ifndef GPS_BAUDRATE
|
|
#define GPS_BAUDRATE 9600
|
|
#define GPS_BAUDRATE_FIXED 0
|
|
#else
|
|
#define GPS_BAUDRATE_FIXED 1
|
|
#endif
|
|
|
|
#ifndef GPS_THREAD_INTERVAL
|
|
#define GPS_THREAD_INTERVAL 200
|
|
#endif
|
|
|
|
/* Step #2: follow with defines common to the architecture;
|
|
also enable HAS_ option not specifically disabled by variant.h */
|
|
#include "architecture.h"
|
|
|
|
#ifndef DEFAULT_REBOOT_SECONDS
|
|
#define DEFAULT_REBOOT_SECONDS 7
|
|
#endif
|
|
|
|
#ifndef DEFAULT_SHUTDOWN_SECONDS
|
|
#define DEFAULT_SHUTDOWN_SECONDS 2
|
|
#endif
|
|
|
|
#ifndef MINIMUM_SAFE_FREE_HEAP
|
|
#define MINIMUM_SAFE_FREE_HEAP 1500
|
|
#endif
|
|
|
|
#ifndef WIRE_INTERFACES_COUNT
|
|
// Officially an NRF52 macro
|
|
// Repurposed cross-platform to identify devices using Wire1
|
|
#if defined(I2C_SDA1) || defined(PIN_WIRE1_SDA)
|
|
#define WIRE_INTERFACES_COUNT 2
|
|
#elif HAS_WIRE
|
|
#define WIRE_INTERFACES_COUNT 1
|
|
#endif
|
|
#endif
|
|
|
|
/* Step #3: mop up with disabled values for HAS_ options not handled by the above two */
|
|
|
|
#ifndef HAS_WIFI
|
|
#define HAS_WIFI 0
|
|
#endif
|
|
#ifndef HAS_ETHERNET
|
|
#define HAS_ETHERNET 0
|
|
#endif
|
|
#ifndef HAS_SCREEN
|
|
#define HAS_SCREEN 0
|
|
#endif
|
|
#ifndef HAS_TFT
|
|
#define HAS_TFT 0
|
|
#endif
|
|
#ifndef HAS_WIRE
|
|
#define HAS_WIRE 0
|
|
#endif
|
|
#ifndef HAS_GPS
|
|
#define HAS_GPS 0
|
|
#endif
|
|
#ifndef HAS_BUTTON
|
|
#define HAS_BUTTON 0
|
|
#endif
|
|
#ifndef HAS_TRACKBALL
|
|
#define HAS_TRACKBALL 0
|
|
#endif
|
|
#ifndef HAS_TOUCHSCREEN
|
|
#define HAS_TOUCHSCREEN 0
|
|
#endif
|
|
#ifndef HAS_TELEMETRY
|
|
#define HAS_TELEMETRY 0
|
|
#endif
|
|
#ifndef HAS_SENSOR
|
|
#define HAS_SENSOR 0
|
|
#endif
|
|
#ifndef HAS_RADIO
|
|
#define HAS_RADIO 0
|
|
#endif
|
|
#ifndef HAS_RTC
|
|
#define HAS_RTC 0
|
|
#endif
|
|
#ifndef HAS_CPU_SHUTDOWN
|
|
#define HAS_CPU_SHUTDOWN 0
|
|
#endif
|
|
#ifndef HAS_BLUETOOTH
|
|
#define HAS_BLUETOOTH 0
|
|
#endif
|
|
|
|
#ifndef HW_VENDOR
|
|
#error HW_VENDOR must be defined
|
|
#endif
|
|
|
|
#ifndef TB_DOWN
|
|
#define TB_DOWN 255
|
|
#endif
|
|
#ifndef TB_UP
|
|
#define TB_UP 255
|
|
#endif
|
|
#ifndef TB_LEFT
|
|
#define TB_LEFT 255
|
|
#endif
|
|
#ifndef TB_RIGHT
|
|
#define TB_RIGHT 255
|
|
#endif
|
|
#ifndef TB_PRESS
|
|
#define TB_PRESS 255
|
|
#endif
|
|
|
|
// Support multiple RGB LED configuration
|
|
#if defined(HAS_NCP5623) || defined(HAS_LP5562) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
|
|
#define HAS_RGB_LED
|
|
#endif
|
|
|
|
// default mapping of pins
|
|
#if defined(PIN_BUTTON2) && !defined(CANCEL_BUTTON_PIN)
|
|
#define ALT_BUTTON_PIN PIN_BUTTON2
|
|
#endif
|
|
#if defined ALT_BUTTON_PIN
|
|
|
|
#ifndef ALT_BUTTON_ACTIVE_LOW
|
|
#define ALT_BUTTON_ACTIVE_LOW true
|
|
#endif
|
|
#ifndef ALT_BUTTON_ACTIVE_PULLUP
|
|
#define ALT_BUTTON_ACTIVE_PULLUP true
|
|
#endif
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// Global switches to turn off features for a minimized build
|
|
// -----------------------------------------------------------------------------
|
|
|
|
// #define MESHTASTIC_MINIMIZE_BUILD 1
|
|
#ifdef MESHTASTIC_MINIMIZE_BUILD
|
|
#define MESHTASTIC_EXCLUDE_MODULES 1
|
|
#define MESHTASTIC_EXCLUDE_WIFI 1
|
|
#define MESHTASTIC_EXCLUDE_BLUETOOTH 1
|
|
#define MESHTASTIC_EXCLUDE_GPS 1
|
|
#define MESHTASTIC_EXCLUDE_SCREEN 1
|
|
#define MESHTASTIC_EXCLUDE_MQTT 1
|
|
#define MESHTASTIC_EXCLUDE_POWERMON 1
|
|
#define MESHTASTIC_EXCLUDE_I2C 1
|
|
#define MESHTASTIC_EXCLUDE_PKI 1
|
|
#define MESHTASTIC_EXCLUDE_POWER_FSM 1
|
|
#define MESHTASTIC_EXCLUDE_TZ 1
|
|
#endif
|
|
|
|
// Turn off all optional modules
|
|
#ifdef MESHTASTIC_EXCLUDE_MODULES
|
|
#define MESHTASTIC_EXCLUDE_AUDIO 1
|
|
#define MESHTASTIC_EXCLUDE_DETECTIONSENSOR 1
|
|
#define MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR 1
|
|
#define MESHTASTIC_EXCLUDE_HEALTH_TELEMETRY 1
|
|
#define MESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION 1
|
|
#define MESHTASTIC_EXCLUDE_PAXCOUNTER 1
|
|
#define MESHTASTIC_EXCLUDE_POWER_TELEMETRY 1
|
|
#define MESHTASTIC_EXCLUDE_RANGETEST 1
|
|
#define MESHTASTIC_EXCLUDE_REMOTEHARDWARE 1
|
|
#define MESHTASTIC_EXCLUDE_STOREFORWARD 1
|
|
#define MESHTASTIC_EXCLUDE_TEXTMESSAGE 1
|
|
#define MESHTASTIC_EXCLUDE_ATAK 1
|
|
#define MESHTASTIC_EXCLUDE_CANNEDMESSAGES 1
|
|
#define MESHTASTIC_EXCLUDE_NEIGHBORINFO 1
|
|
#define MESHTASTIC_EXCLUDE_TRACEROUTE 1
|
|
#define MESHTASTIC_EXCLUDE_WAYPOINT 1
|
|
#define MESHTASTIC_EXCLUDE_INPUTBROKER 1
|
|
#define MESHTASTIC_EXCLUDE_SERIAL 1
|
|
#define MESHTASTIC_EXCLUDE_POWERSTRESS 1
|
|
#define MESHTASTIC_EXCLUDE_ADMIN 1
|
|
#endif
|
|
|
|
// // Turn off wifi even if HW supports wifi (webserver relies on wifi and is also disabled)
|
|
#ifdef MESHTASTIC_EXCLUDE_WIFI
|
|
#define MESHTASTIC_EXCLUDE_WEBSERVER 1
|
|
#undef HAS_WIFI
|
|
#define HAS_WIFI 0
|
|
#endif
|
|
|
|
// Allow code that needs internet to just check HAS_NETWORKING rather than HAS_WIFI || HAS_ETHERNET
|
|
#define HAS_NETWORKING (HAS_WIFI || HAS_ETHERNET)
|
|
|
|
// // Turn off Bluetooth
|
|
#ifdef MESHTASTIC_EXCLUDE_BLUETOOTH
|
|
#undef HAS_BLUETOOTH
|
|
#define HAS_BLUETOOTH 0
|
|
#endif
|
|
|
|
// // Turn off GPS
|
|
#ifdef MESHTASTIC_EXCLUDE_GPS
|
|
#undef HAS_GPS
|
|
#define HAS_GPS 0
|
|
#undef MESHTASTIC_EXCLUDE_RANGETEST
|
|
#define MESHTASTIC_EXCLUDE_RANGETEST 1
|
|
#endif
|
|
|
|
// Turn off Screen
|
|
#ifdef MESHTASTIC_EXCLUDE_SCREEN
|
|
#undef HAS_SCREEN
|
|
#define HAS_SCREEN 0
|
|
#endif
|
|
|
|
#include "DebugConfiguration.h"
|
|
#include "RF95Configuration.h"
|