init

2024-10-30 09:54:24 +01:00
commit 46cbe571eb
909 changed files with 132802 additions and 0 deletions
@@ -0,0 +1,61 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+// static const uint8_t LED_BUILTIN = -1;
+
+static const uint8_t TX = 43;
+static const uint8_t RX = 44;
+
+static const uint8_t SDA = 18;
+static const uint8_t SCL = 8;
+
+// Default SPI will be mapped to Radio
+static const uint8_t SS = 9;
+static const uint8_t MOSI = 41;
+static const uint8_t MISO = 38;
+static const uint8_t SCK = 40;
+
+static const uint8_t A0 = 1;
+static const uint8_t A1 = 2;
+static const uint8_t A2 = 3;
+static const uint8_t A3 = 4;
+static const uint8_t A4 = 5;
+static const uint8_t A5 = 6;
+static const uint8_t A6 = 7;
+static const uint8_t A7 = 8;
+static const uint8_t A8 = 9;
+static const uint8_t A9 = 10;
+static const uint8_t A10 = 11;
+static const uint8_t A11 = 12;
+static const uint8_t A12 = 13;
+static const uint8_t A13 = 14;
+static const uint8_t A14 = 15;
+static const uint8_t A15 = 16;
+static const uint8_t A16 = 17;
+static const uint8_t A17 = 18;
+static const uint8_t A18 = 19;
+static const uint8_t A19 = 20;
+
+static const uint8_t T1 = 1;
+static const uint8_t T2 = 2;
+static const uint8_t T3 = 3;
+static const uint8_t T4 = 4;
+static const uint8_t T5 = 5;
+static const uint8_t T6 = 6;
+static const uint8_t T7 = 7;
+static const uint8_t T8 = 8;
+static const uint8_t T9 = 9;
+static const uint8_t T10 = 10;
+static const uint8_t T11 = 11;
+static const uint8_t T12 = 12;
+static const uint8_t T13 = 13;
+static const uint8_t T14 = 14;
+
+static const uint8_t BAT_ADC_PIN = 4;
+
+#endif /* Pins_Arduino_h */
@@ -0,0 +1,19 @@
+; LilyGo T-Deck
+[env:t-deck]
+extends = esp32s3_base
+board = t-deck
+board_check = true
+upload_protocol = esptool
+#upload_port = COM29
+
+build_flags = ${esp32_base.build_flags} 
+  -DT_DECK 
+  -DBOARD_HAS_PSRAM
+  -DMAX_THREADS=40
+  -DGPS_POWER_TOGGLE
+  -Ivariants/t-deck
+
+lib_deps = ${esp32s3_base.lib_deps}
+	lovyan03/LovyanGFX@^1.1.9
+  earlephilhower/ESP8266Audio@^1.9.7
+  earlephilhower/ESP8266SAM@^1.0.1
@@ -0,0 +1,100 @@
+// ST7789 TFT LCD
+#define ST7789_CS 12
+#define ST7789_RS 11  // DC
+#define ST7789_SDA 41 // MOSI
+#define ST7789_SCK 40
+#define ST7789_RESET -1
+#define ST7789_MISO 38
+#define ST7789_BUSY -1
+#define ST7789_BL 42
+#define ST7789_SPI_HOST SPI2_HOST
+#define TFT_BL 42
+#define SPI_FREQUENCY 40000000
+#define SPI_READ_FREQUENCY 16000000
+#define TFT_HEIGHT 320
+#define TFT_WIDTH 240
+#define TFT_OFFSET_X 0
+#define TFT_OFFSET_Y 0
+#define TFT_OFFSET_ROTATION 0
+#define SCREEN_ROTATE
+#define SCREEN_TRANSITION_FRAMERATE 5
+#define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
+
+#define HAS_TOUCHSCREEN 1
+#define SCREEN_TOUCH_INT 16
+#define TOUCH_I2C_PORT 0
+#define TOUCH_SLAVE_ADDRESS 0x5D // GT911
+
+#define SLEEP_TIME 120
+
+#define BUTTON_PIN 0
+// #define BUTTON_NEED_PULLUP
+
+#define GPS_RX_PIN 44
+#define GPS_TX_PIN 43
+
+// Have SPI interface SD card slot
+#define HAS_SDCARD 1
+#define SPI_MOSI (41)
+#define SPI_SCK (40)
+#define SPI_MISO (38)
+#define SPI_CS (39)
+#define SDCARD_CS SPI_CS
+
+#define BATTERY_PIN 4 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
+// ratio of voltage divider = 2.0 (RD2=100k, RD3=100k)
+#define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
+#define ADC_CHANNEL ADC1_GPIO4_CHANNEL
+
+// keyboard
+#define I2C_SDA 18 // I2C pins for this board
+#define I2C_SCL 8
+#define KB_POWERON 10                  // must be set to HIGH
+#define KB_SLAVE_ADDRESS TDECK_KB_ADDR // 0x55
+#define KB_BL_PIN 46                   // not used for now
+#define CANNED_MESSAGE_MODULE_ENABLE 1
+
+// trackball
+#define HAS_TRACKBALL 1
+#define TB_UP 3
+#define TB_DOWN 15
+#define TB_LEFT 1
+#define TB_RIGHT 2
+#define TB_PRESS BUTTON_PIN
+
+// microphone
+#define ES7210_SCK 47
+#define ES7210_DIN 14
+#define ES7210_LRCK 21
+#define ES7210_MCLK 48
+
+// dac / amp
+#define HAS_I2S
+#define DAC_I2S_BCK 7
+#define DAC_I2S_WS 5
+#define DAC_I2S_DOUT 6
+
+// LoRa
+#define USE_SX1262
+#define USE_SX1268
+
+#define LORA_SCK 40
+#define LORA_MISO 38
+#define LORA_MOSI 41
+#define LORA_CS 9
+
+#define LORA_DIO0 -1 // a No connect on the SX1262 module
+#define LORA_RESET 17
+#define LORA_DIO1 45 // SX1262 IRQ
+#define LORA_DIO2 13 // SX1262 BUSY
+#define LORA_DIO3    // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
+
+#define SX126X_CS LORA_CS // FIXME - we really should define LORA_CS instead
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+// Not really an E22 but TTGO seems to be trying to clone that
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+// Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
+// code)