pohui_pohui/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-08-03 04:15:53 +00:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity

Remove unused build flags and dependencies

Browse Source
This commit is contained in:
Daniel.Cao 2025-07-14 10:26:51 +08:00
parent 53762bb1c1
commit 0325a129c4
2 changed files with 3 additions and 47 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

45
variants/rak_wismeshtag/platformio.ini
View File

@ -6,49 +6,10 @@ board_check = true
build_flags = ${nrf52840_base.build_flags} -Ivariants/rak_wismeshtag -D WISMESH_TAG -D RAK_4631
-L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
-DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
-DEINK_WIDTH=250
-DEINK_HEIGHT=122
-DRADIOLIB_EXCLUDE_SX128X=1
-DRADIOLIB_EXCLUDE_SX127X=1
-DRADIOLIB_EXCLUDE_LR11X0=1
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/rak_wismeshtag> +<mesh/eth/> +<mesh/api/> +<mqtt/>
-DMESHTASTIC_EXCLUDE_WIFI=1
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/rak_wismeshtag>
lib_deps =
${nrf52840_base.lib_deps}
${networking_base.lib_deps}
melopero/Melopero RV3028@^1.1.0
https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
https://github.com/RAKWireless/RAK12034-BMX160/archive/dcead07ffa267d3c906e9ca4a1330ab989e957e2.zip
; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
;upload_protocol = jlink
; Allows programming and debug via the RAK NanoDAP as the default debugger tool for the RAK4631 (it is only $10!)
; programming time is about the same as the bootloader version.
; For information on this see the meshtastic developers documentation for "Development on the NRF52"
[env:rak4631_dbg]
extends = env:rak4631
board_level = extra
; if the builtin version of openocd has a buggy version of semihosting, so use the external version
; platform_packages = platformio/tool-openocd@^3.1200.0
build_flags =
${env:rak4631.build_flags}
-D USE_SEMIHOSTING
lib_deps =
${env:rak4631.lib_deps}
https://github.com/geeksville/Armduino-Semihosting/archive/35b538fdf208c3530c1434cd099a08e486672ee4.zip
; NOTE: the pyocd support for semihosting is buggy. So I switched to using the builtin platformio support for the stlink adapter which worked much better.
; However the built in openocd version in platformio has buggy support for TCP to semihosting.
;
; So I'm now trying the external openocd - but the openocd scripts for nrf52.cfg assume you are using a DAP adapter not an STLINK adapter.
; In theory I could change those scripts. But for now I'm trying going back to a DAP adapter but with the external openocd.
upload_protocol = stlink
; eventually use platformio/tool-pyocd@^2.3600.0 instad
;upload_protocol = custom
;upload_command = pyocd flash -t nrf52840 $UPLOADERFLAGS $SOURCE
${nrf52840_base.lib_deps}

5
variants/rak_wismeshtag/variant.h
View File

@ -218,11 +218,6 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
#define GPS_RX_PIN PIN_SERIAL1_RX
#define GPS_TX_PIN PIN_SERIAL1_TX
// Define pin to enable GPS toggle (set GPIO to LOW) via user button triple press
// RAK12002 RTC Module
#define RV3028_RTC (uint8_t)0b1010010
// RAK WISMESHTAG
#define PIN_BUZZER 21