pohui_pohui/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-09-05 19:19:18 +00:00
Code Issues Actions 7 Packages Projects Releases Wiki Activity

Trunk fmt

Browse Source
This commit is contained in:
ford-jones 2025-09-03 13:38:39 +12:00
parent 798040b5b8
commit c62f262f63
5 changed files with 24 additions and 27 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
src/SerialConsole.cpp
View File

@ -65,10 +65,9 @@ SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port), con
int32_t SerialConsole::runOnce()
{
#ifdef HELTEC_MESH_SOLAR
//After enabling the mesh solar serial port module configuration, command processing is handled by the serial port module.
if(moduleConfig.serial.enabled && moduleConfig.serial.override_console_serial_port
&& moduleConfig.serial.mode==meshtastic_ModuleConfig_SerialConfig_Serial_Mode_MS_CONFIG)
{
// After enabling the mesh solar serial port module configuration, command processing is handled by the serial port module.
if (moduleConfig.serial.enabled && moduleConfig.serial.override_console_serial_port &&
moduleConfig.serial.mode == meshtastic_ModuleConfig_SerialConfig_Serial_Mode_MS_CONFIG) {
return 250;
}
#endif

6
src/mesh/StreamAPI.h
View File

@ -50,15 +50,15 @@ class StreamAPI : public PhoneAPI
* phone.
*/
virtual int32_t runOncePart();
virtual int32_t runOncePart(char *buf,uint16_t bufLen);
virtual int32_t runOncePart(char *buf, uint16_t bufLen);
private:
/**
* Read any rx chars from the link and call handleToRadio
*/
int32_t readStream();
int32_t readStream(char *buf,uint16_t bufLen);
int32_t handleRecStream(char *buf,uint16_t bufLen);
int32_t readStream(char *buf, uint16_t bufLen);
int32_t handleRecStream(char *buf, uint16_t bufLen);
/**
* call getFromRadio() and deliver encapsulated packets to the Stream

1
variants/esp32s3/t-deck-pro/variant.h
View File

@ -100,4 +100,3 @@
#define MODEM_DTR 8
#define MODEM_RX 10
#define MODEM_TX 11

9
variants/nrf52840/heltec_mesh_solar/variant.h
View File

@ -39,7 +39,6 @@ extern "C" {
#define NUM_ANALOG_INPUTS (1)
#define NUM_ANALOG_OUTPUTS (0)
#define PIN_LED1 (0 + 12) // green (confirmed on 1.0 board)
#define LED_BLUE PIN_LED1 // fake for bluefruit library
#define LED_GREEN PIN_LED1
@ -48,7 +47,7 @@ extern "C" {
#define HAS_NEOPIXEL // Enable the use of neopixels
#define NEOPIXEL_COUNT 1 // How many neopixels are connected
#define NEOPIXEL_DATA (32+15) // gpio pin used to send data to the neopixels
#define NEOPIXEL_DATA (32 + 15) // gpio pin used to send data to the neopixels
#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
/*
@ -141,9 +140,9 @@ No longer populated on PCB
// To debug via the segger JLINK console rather than the CDC-ACM serial device
// #define USE_SEGGER
#define BQ4050_SDA_PIN (32+1) // I2C data line pin
#define BQ4050_SCL_PIN (32+0) // I2C clock line pin
#define BQ4050_EMERGENCY_SHUTDOWN_PIN (32+3) // Emergency shutdown pin
#define BQ4050_SDA_PIN (32 + 1) // I2C data line pin
#define BQ4050_SCL_PIN (32 + 0) // I2C clock line pin
#define BQ4050_EMERGENCY_SHUTDOWN_PIN (32 + 3) // Emergency shutdown pin
#define HAS_RTC 0
#ifdef __cplusplus