pohui_pohui/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-05-01 19:46:42 +00:00
Code Issues Actions 5 Packages Projects Releases Wiki Activity

#697 GPIO 12 is an odd pin.

Browse Source
This commit is contained in:
Jm 2021-02-20 00:34:25 -08:00
parent c690f81574
commit e4141df0e9
2 changed files with 12 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

19
src/configuration.h
View File

@ -354,15 +354,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VEXT_ENABLE 21 // active low, powers the oled display and the lora antenna boost
#define LED_PIN 25 // If defined we will blink this LED
#define BUTTON_PIN \
12 // If defined, this will be used for user button presses, if your board doesn't have a physical switch, you can wire one
// between this pin and ground
#define BUTTON_PIN 12 // If defined, this will be used for user button presses,
/* Don't enable the internal pull up on the TLORA_V2_1_16. GPIO 12 is connected to a bidirectional
diode. If someone needs to use a button, they should connect an external pull up that's stronger
than what's built into the esp32
*/
// #define BUTTON_NEED_PULLUP
#define BUTTON_NEED_PULLUP
#define USE_RF95
#define LORA_DIO0 26 // a No connect on the SX1262 module
@ -380,15 +374,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define GPS_RESET_N 10
#define GPS_EXTINT 23 // On MAX-M8 module pin name is EXTINT. On L70 module pin name is STANDBY.
#define BATTERY_PIN 39 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define BATTERY_PIN 39 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define BATTERY_EN_PIN 14 // Voltage voltage divider enable pin connected to mosfet
#define I2C_SDA 4 // I2C pins for this board
#define I2C_SCL 2
#define LED_PIN 12 // If defined we will blink this LED
//#define BUTTON_PIN 36 // If defined, this will be used for user button presses (ToDo problem on that line on debug screen --> Long press start!)
//#define BUTTON_NEED_PULLUP //GPIOs 34 to 39 are GPIs – input only pins. These pins don’t have internal pull-ups or pull-down resistors.
#define LED_PIN 12 // If defined we will blink this LED
//#define BUTTON_PIN 36 // If defined, this will be used for user button presses (ToDo problem on that line on debug screen -->
//Long press start!) #define BUTTON_NEED_PULLUP //GPIOs 34 to 39 are GPIs – input only pins. These pins don’t have internal
//pull-ups or pull-down resistors.
#define USE_RF95
#define LORA_DIO0 38 // a No connect on the SX1262 module

7
src/main.cpp
View File

@ -305,12 +305,15 @@ void setup()
#ifdef BUTTON_PIN
#ifndef NO_ESP32
// If BUTTON_PIN is held down during the startup process,
// force the device to go into a SoftAP mode.
bool forceSoftAP = 0;
// If the button is connected to GPIO 12, don't enable the ability to use
// meshtasticAdmin on the device.
pinMode(BUTTON_PIN, INPUT);
#ifdef BUTTON_NEED_PULLUP
gpio_pullup_en((gpio_num_t)BUTTON_PIN);
delay(10);
#endif
// BUTTON_PIN is pulled high by a 12k resistor.