* Tests to identify display model
* (InkHUD) SSD1682 controller IC
Has a few quirks, gets its own base class
* (InkHUD) E0213A367 Display
For Heltec Wireless Paper V1.1.1, V1.2
For Heltec VM-E213 V1.1
* (InkHUD) Select display model at boot
* (BaseUI) Wrapper to combine multiple GxEPD2 drivers
Workaround for issue of GxEPD2_BW objects not having a shared base class. Allows us to select a driver at runtime.
https://github.com/meshtastic/firmware/issues/6851#issuecomment-2905353447
* (BaseUI) Select E-Ink model at boot
* (InkHUD) SSD1682 deep sleep
* (InkHUD) No deep sleep for SSD1682
* (InkHUD) Fully no-op deep sleep for SSD1682
As reported by @KZ1R , Kazakhstan has frequencies in use for Lora devices that are not covered by our existing band selections.
This adds
* KZ_433 433.075 - 434.775 MHz <10 mW EIRP, Low Powered Devices (LPD)
* KZ_863 863 - 868 MHz <25 mW EIRP, 500kHz channels allowed, must not be used at airfields
Legal ref provided in https://github.com/meshtastic/firmware/issues/7204 and verified.
https://www.gov.kz/memleket/entities/mdai/press/article/details/6128
Order of the Ministry of Investments and Development of the Republic of Kazakhstan No. 34 dated January 21, 2015.
Published on 01 July 2024 19:03 Updated on 01 July 2024
Fixes https://github.com/meshtastic/firmware/issues/7204
* Testing battery states with some info lines in the drawCommonHeader
* Update logic of USB connected, update images for states
* Tweak battery layout for isHighResolution
* Hide the magic 101%
* Adjust padding for SENSECAP_INDICATOR
* Excessive logs are unnecessary as troubleshooting is done.
* Reduce excess code - simplify readability
* Restore Lightning Bolt for Charging and related alignment issues
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Honor custom boot screen from userPrefs.jsonc
* Meshtastic logo when powered off, userPrefs logo at boot
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Initial work on splitting notification renderer into components for reuse
* More progress
* Fix notification popup
* more fix, less crash
* Adjustments for OLED on keeping menus tidy, added Bluetooth Toggle to Home frame. Also widen the frame slightly if you have a scroll bar
* Small changes for EInk to not crowd elements
* Change System frame menu over to better match actions; added color picker for T114
* Fix build errors and add T190 for testing
* Logic gates are hard sometimes
* Screen Color Picker changes, defined Yellow as a Color.
* Additional colors and tuning
* Abandon std::sort in NodeDB, and associated fixes (#7175)
* Generate short name for nodes that don't have user yet
* Add reboot menu
* Sort fixes
* noop sort option to avoid infinite loop
* Refactor Overlay Banner
* Continuing work on Color Picker
* Add BaseUI menus to add and remove Favorited Nodes
* Create TFT_MESH_OVERRIDE for variants.h and defined colors
* Trigger a NodeStatus update at the end of setup() to get fresh data on display at boot.
* T114 defaults to White, Yellow is now bright Yellow
* Revert "T114 defaults to White, Yellow is now bright Yellow"
This reverts commit 8d05e17f11.
* Only show OEM text if not OLED
* Adjust OEM logo to maximize visible area
* Start plumbing in Color Picker changes
* Finished plumbing
* Fix warning
* Revert "Fix warning"
This reverts commit 2e8aecd52d.
* Fix display not fully redrawing
* T-Deck should get color too
* Emote Revamp
* Update emotes.cpp
* Poo Emote fix
* Trunk fix
* Add secret test menu and number picker
* Missed bits
* Save colors between reboots
* Save Clock Face election to protobuf
* Make reboot first, then settings
* Add padding for single line pop-ups
* Compass saving and faster menus
* Resolve build issue with Excluding GPS
* Resolve issue with memory bars on EInk
* Add brightness settings for supported screen (#7182)
* Add brightness menu.
* add loop destination selection.
* Bring back color (and sanity) to the menus!
* Trunk
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
Co-authored-by: Wilson <m.tools@qq.com>
* Add 12pt fonts
* Add fontMedium
In addition to fontSmall and fontLarge
* Set fonts in nicheGraphics.h
* Change all uses of fontLarge to fontMedium
fontLarge was previously set at 9pt. fontLarge is now 12pt, fontMedium is 9pt. (NB: fonts may be customized per-variant)
* Use fontLarge with "All Messages" and "DMs" applets
* Documentation
* Added option to invert screen on InkHUD
* Rewrite to make use of existing config.display.displaymode
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add support for RAK3112 variant with necessary configurations and definitions
* Add the configuration of the LED pin
* Refactor rak3112 variant configuration: update name, remove unused files,
* Update RAK3112 configuration: refine memory settings, adjust GPS pin definitions
* Update RAK3112 hardware vendor definition to use correct model
* configure LED pins and update module definitions
* Update USB mode configuration for RAK3112 board
* Update power and battery configuration in rak3112 variant
* Cancel the modification of mesh.pb.h
* Rename RAKwireless RAK3112 to RAK3312
---------
Co-authored-by: daniel <daniel.cao@rakwireless.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Update platformio inis for stm32 platform and wio-e5 variant for enabling i2c
* Don't reference timezone functions if MESHTASTIC_EXCLUDE_TZ is defined
* Use custom pow_of_two in RadioInterface instead of floating-point pow()
* First pass: enable sensors for STM32wL
* Fix AirQualityTelemetryModule being created if the PM25AQI header is missing
* Link in power sensor libraries
* more ini tweaks
* Add =1 to EXCLUDE defines, fix indentation.
* Drop HAS_WIRE in ini, it's defined in architecture.h
* Fix build when power sensor libraries are missing
Make MAX sensor integration into Power.cpp optional based on its library header existing.
Also make NullSensor expose a voltage and current sensor, because Power calls directly into these for INA sensors.
This lets us remove all the deps for the STM32WL platform.
* Change default I2C for RAK3172 to be I2C1, not I2C2
* Respect the laws of mathematics (oops)
* Fix LED pinout for T-Echo board marked v1.0, date 2021-6-28
* Merge PR #420
* Fixed double and missing Default class.
* Use correct format specifier and fixed typo.
* Removed duplicate code.
* Fix error: #if with no expression
* Fix warning: extra tokens at end of #endif directive.
* Fix antenna switching logic. Complementary-pin control logic is required on the rp2040-lora board.
* Fix deprecated macros.
* Set RP2040 in dormant mode when deep sleep is triggered.
* Fix array out of bounds read.
* Admin key count needs to be set otherwise the key will be zero loaded after reset.
* Don't reset the admin key size when loading defaults. Preserve an existing key in config if possible.
* Remove log spam when reading INA voltage sensor.
* Remove static declaration for admin keys from userPrefs.h. Load hard coded admin keys in case config file has empty slots.
* Removed newlines from log.
* Fix issue #5665.
* Fix build for Pico2 RP2350 platform.
* Enable Wifi client on Pico2W.
* Use correct processor on Pico2.
* Fix deprecated warning.
* Update platform and framework for RP2350.
* Added Pico2W variant including Wifi support.
* Fix typo in used variant.
* Remove obsolete define.
* Fix for native Linux build.
* Simplify RP2350 platform tag reference.
Co-authored-by: Austin <vidplace7@gmail.com>
* Cast user prefs strings.
* Update to last successfully building platform package.
* Define I2C GPIOs to ensure usage of both ports. Possibly fixes#5361
* RAK11310 support for RAK12002 RTC added.
* Update platform and framework packages to 4.4.3.
* Use RP2040 base platform and framework package. Use RAK11300 board definition in arduino-pico framework.
* Use RAK11300 board definition in arduino-pico framework.
* Fix build when MESHTASTIC_EXCLUDE_GPS is defined.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>
Co-authored-by: Austin <vidplace7@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
