141 Commits

Author	SHA1	Message	Date
Ben Meadors	0860fee209	Merge branch 'develop' into dev-heltec-tracker-v2	2025-10-02 06:10:00 -05:00
rcarteraz	b28d095096	missed t-rexes	2025-10-01 13:32:44 -05:00
Jonathan Bennett	4fd568f384	Initial support for T-Rex	2025-10-01 13:32:44 -05:00
Quency-D	8d323a1cf1	add heltec tracker v2 board.	2025-09-30 08:20:48 +10:00
Quency-D	cea9e1238b	Add heltec_v4 board. (#7845) ... * add heltec_v4 board. * Update variants/esp32s3/heltec_v4/platformio.ini Co-authored-by: Austin <vidplace7@gmail.com> * Limit the maximum output power. * Trunk fixes Fixes formatting to match meshtastic trunk linter. * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Austin <vidplace7@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-09-21 07:13:28 -05:00
Quency-D	11eb4a5b90	Add heltec_v4 board. (#7845) ... * add heltec_v4 board. * Update variants/esp32s3/heltec_v4/platformio.ini Co-authored-by: Austin <vidplace7@gmail.com> * Limit the maximum output power. * Trunk fixes Fixes formatting to match meshtastic trunk linter. * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Austin <vidplace7@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-09-21 07:03:44 -05:00
Manuel	39ff880506	reorganize 8MB partition for MUI devices (#7860) ... * reorganize 8MB partition for MUI devices * update device-install scripts to MUI 8MB partition scheme	2025-09-08 05:56:47 -05:00
Chloe Bethel	0bd4cefad3	Make ExternalNotification show up in excluded_modules, more STM32 modules (#7797) ... * Show ExternalNotification as excluded if it is * Enable ExternalNotification, SerialModule and RangeTest on STM32WL * Misc fixes for #7797 - ARCH_STM32 -> ARCH_STM32WL, use less flash by dropping weather station support for serialmodule, set tx/rx pins before begin * Enable Serial1 on RAK3172, make SerialModule use it (console is on LPUART1) * Fix SerialModule on RAK3172, fix board definition of RAK3172 to include the right pin mapping.	2025-09-02 07:09:15 -05:00
Ben Meadors	3b82d55176	Revert "Add gat562_mesh_tracker_pro device. (#7815)" (#7824) ... This reverts commit 7d1300ab66.	2025-09-02 06:17:01 -05:00
Wilson	7d1300ab66	Add gat562_mesh_tracker_pro device. (#7815)	2025-09-02 13:06:24 +08:00
Ben Meadors	0903ed8232	Mesh solar integrate (#7764) ... * Added HELTEC MeshSolar board. (#7499) * Added HELTEC MeshSolar board. * Set emergency shutdown pin as high impedance * Set emergency shutdown pin as high impedance Set emergency shutdown pin as high impedance * Update variants/nrf52840/heltec_mesh_solar/variant.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update variants/nrf52840/heltec_mesh_solar/variant.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update variants/nrf52840/heltec_mesh_solar/variant.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update I2C SCL pin definition in variant.h --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Updates --------- Co-authored-by: Quency-D <55523105+Quency-D@users.noreply.github.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-08-27 06:02:54 -05:00
Wilson	f413c49555	Add Meshtiny device (#7676) ... * Add Meshtiny device - nRF52 OLED upDown encoder * Update platformio.ini * Update platformio.ini * Add GPS Exclude to Meshtiny. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-20 11:52:10 +08:00
Manuel	b3525c2569	T-Deck Pro support (#6936) ... * initial draft * fix touchscreen * fix touchscreen * optimize GPS * battery management * cleanup comments * enable vibration motor * refactored TCA8418Keyboard * update HW_VENDOR id * manual fixes after merge * fix keyboard/BQ27220 detection * add BQ27220 * modify charge voltage and current * update XpowerLib * design capacity * try-fix charge behavior * improve Vbus detection * moved variant into esp32s3 folder --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>	2025-07-21 19:33:24 +02:00
Ben Meadors	354f149338	Make PacketHistory logging less chatty (#7272)	2025-07-08 15:12:44 -05:00
Ben Meadors	798b1f4d86	Add HWIDs for T1000-E in DFU mode (#7235)	2025-07-05 07:35:20 -05:00
Ben Meadors	409dfe22ae	Fix Seeed L1 board to enable consistent PIO flashing (#7211)	2025-07-02 20:58:15 -05:00
Daniel.Cao	90e99b2bac	feat: add support for RAK3312 (New RAKwireless wiscore ESP32-S3 + SX1262) (#7115) ... * Add support for RAK3112 variant with necessary configurations and definitions * Add the configuration of the LED pin * Refactor rak3112 variant configuration: update name, remove unused files, * Update RAK3112 configuration: refine memory settings, adjust GPS pin definitions * Update RAK3112 hardware vendor definition to use correct model * configure LED pins and update module definitions * Update USB mode configuration for RAK3112 board * Update power and battery configuration in rak3112 variant * Cancel the modification of mesh.pb.h * Rename RAKwireless RAK3112 to RAK3312 --------- Co-authored-by: daniel <daniel.cao@rakwireless.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-07-02 06:03:42 -05:00
Ben Meadors	b0c5327585	Trunk	2025-06-15 07:40:45 -05:00
Csrutil	5d0bf03b01	add support for GAT562 Mesh Trial Tracker (#6984) ... * add support for GAT562 Mesh Trial Tracker * Hardware Model Definition for GAT562_MESH_TRIAL_TRACKER * Added RAK4630 for led pin 2 (blue) * Added RAK4630 for led pin 2 (blue) comment * don't touch src/mesh/NodeDB.cpp * set fixed baudrate for gat562_mesh_trial_tracker * adjust the order of the HW_VENDOR defines --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net>	2025-06-13 17:27:48 +10:00
Travis Hardiman	cf4f088337	Update URL for ThinkNode M1 (#7005)	2025-06-10 13:52:30 +10:00
Travis Hardiman	22cb20d294	Update heltec t114 URL (#7004)	2025-06-10 13:51:37 +10:00
dylanli	c0c2ec195f	add support for seeed wio tracker L1 (#6907) ... * add support for seeed wio tracker l1 * add support in nrf52 arch * fix ADC problem and comments incorrect * fix gps wakeup pin * fix gps pin	2025-05-29 06:33:22 -05:00
rcarteraz	b1955c34aa	Update Seeed Solar Node (#6763) ... * Update Seeed Solar Node * Update Seeed Solar Node * updates * updates * updates --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-14 06:32:24 -05:00
Thomas Göttgens	cc66f7c79b	Crowpanel 4.3, 5.0, 7.0 support (#6611) ... * SD software SPI control * fix notification crash; * allow wake on touch * don't build non-MUI variants * use pwm buzzer * Finalize support for Crowpanel TFT 2.4, 2.8 and 3.5 * add hardware ID for TFT panels * Add stubs for the bigger panels. WIP! * fix braces * elecrow 4.3, 5.0, 7.0 support * completed implementation 4.3, 5.0, 7.0 variants * NodeDB default config & simplified light sleep macros * trunk fmt * remove flags * removed leftovers (note: rtc gpios are only needed for deep sleep; the remove section caused issues with the elecrows) --------- Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> Co-authored-by: Austin <vidplace7@gmail.com>	2025-05-13 14:15:52 +02:00
Thomas Göttgens	ef14967fbf	Crowpanel 2.4,2.8 and 3.5 support (#6355) ... Co-authored-by: mverch67 <manuel.verch@gmx.de>	2025-04-17 16:03:37 +02:00
dylanli	d74359abf0	add support for Seeed solar panel (#6597) ... * add seeed_solar_node * fix RF_SW problem * fix IIC problem * Update Button redefination * Add on-board flash pin defination * fix missing a ',' * update seeed sorlar panel defination * fix word spell * fix upstream change * fix upstream change * fix upstream change * fix formate * Restore the FLASH definition that was deleted by mistake and pull down the CS pin to ensure low power consumption * fix led defination conflict * Delete lib/device-ui directory * Restore protobufs submodule --------- Co-authored-by: WayenWeng <jinyuan.weng@seeed.cc>	2025-04-17 16:11:17 +10:00
Tom Fifield	98411d408a	Trunk fixes for heltec mesh pocket. (#6588) ... https://github.com/meshtastic/firmware/pull/6533 was merged without running trunk. This patch fixes the newly introduced trunk errors.	2025-04-15 16:37:09 -05:00
Aaron.Lee	b46aad85cc	Add new hardware: Heltec MeshPocket (#6533) ... * Add Heltec MeshPocket. * MeshPocket source code update * Optimiz code for refresh border during full update. * Update Heltec MeshPocket json file info.	2025-04-15 13:34:30 +10:00
Ken Piper	baa05aacf5	fix: Correct underlying cause of T-Watch not functioning when set to a 16MB filesystem (#6563) ... * Fix maximum flash size in T-Watch S3 board definition * Revert "Fix: T-Watch-S3 has 8MB Flash (#6407)" This reverts commit 769f0623be.	2025-04-11 13:04:37 +02:00
Nasimovy	2125c03974	Fix for PSRAM detection on ESP32-S3R8 and t-beam (#6504) ... * remove duplicate HAS_LP5562 introduced by #6422 * T190 PSRAM fix * all the boards with a ESP32-S3R8 * T-beam V1.1 PSRAM	2025-04-06 20:27:46 -05:00
Plant Daddy	f626f02005	Add 'bluetooth' option to the LilyGo T-Watch-S3 definition.	2025-03-31 09:14:48 +02:00
Thomas Göttgens	4a12b4eb32	add Thinknode-M1 (#6435) ... * ThinkNode M1 * Update Epaper Driver * Your day isn't complete unless trunk has complained about your formatting at least once.	2025-03-28 21:22:17 +01:00
Mark Trevor Birss	186e509607	Update esp32-s3-pico.json (#6284) ... * Update esp32-s3-pico.json * Update esp32-s3-pico.json	2025-03-11 13:11:11 +02:00
dylanli	445efe9e21	Add support for seeed_xiao_nrf52840_kit (#6231) ... * add support for seeed_xiao_nrf52840_kit * Update platformio.ini remove board level define	2025-03-05 16:22:25 -06:00
Mictronics	f0f2cd0e0e	RAK11310 Fix build with latest Arduino framework (#6227)	2025-03-04 21:39:10 +01:00
A_Ponzano	7eb77276cd	Add support for new NRF52 board, MeshLink (#5736) ... * Add support for MeshLink * Updated, enabled watchdog and added button definition * added eink variant and removed some compile errors * Small board json file edit * Finally got trunk working (somehow?), this is just cleanup with trunk fmt * Various improvements and cleanup. Removed the use of PIN_3V3_En and defined a specific WD_EN pin instead for better clarity. Will do a bit more testing asap to make sure everything still works as intended :) * Enable on-board QSPI Flash * run trunk fmt with clang-format --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Austin <vidplace7@gmail.com>	2025-02-16 19:49:17 -06:00
Tom Fifield	89ebafc8b8	Minor TFT branch cherry-picks (#5682) ... * update indicator board * Fixed the issue that indicator device uploads via rp2040 serial port in some cases. * esp debug logs * USB mode=1 messed up the debug log * dummy for config transfer (#5154) --------- Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: virgil <virgil.wang.cj@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>	2024-12-28 08:32:24 -06:00
Tom Fifield	ad726ad684	More meshtab cherry-pick (#5681) ... * board definition for mesh-tab (not yet used) * use board definition for mesh-tab --------- Co-authored-by: mverch67 <manuel.verch@gmx.de>	2024-12-28 08:29:58 -06:00
Thomas Göttgens	8e6ef4ea04	add nugget and nibble boards for 38c3 (#5609) ... * add nugget and nibble boards for 38c3 * mark those boards extra for now	2024-12-21 14:57:01 +01:00
📡 WatskeBart 🤖	af79970ad7	Added product url (#5594)	2024-12-18 15:46:18 +11:00
Tom Fifield	c071eed6a3	cherry-pick: unphone support (#5174) ... * unphone part 1 * Unphone support * update HWid unphone --------- Co-authored-by: mverch67 <manuel.verch@gmx.de>	2024-10-28 09:25:25 +01:00
Jonathan Bennett	82145e0661	Cherry picks (#5166) ... * fix compiler error std::find() * fix wifi/bt connection status * try-fix crash * added 1200baud reset --------- Co-authored-by: mverch67 <manuel.verch@gmx.de>	2024-10-28 10:21:57 +10:00
Muhammad Shah	e37369a25f	Icarus - Custom PCB (#5155) ... * added Icarus * added Icarus * Update platformio.ini * Fixed I2C ports * Update variant.h	2024-10-26 19:24:30 -05:00
Tom Fifield	8acc9ccf5f	Remove support for pca10056-rc-clock (#4955) ... In 2020, geeksville had a NRF52840-dk development board with a busted oscilliator. Let's retire it from service :) Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-10-05 05:26:54 -05:00
Tom Fifield	243421b2a5	Retire lora-relay boards (#4957) ... The lora-relay boards were important pathfinders for nrf52 support some years back. They are no longer commonly produced and there are now many nrf52 options on the market. Retire these boards and associated variant.	2024-10-05 05:25:28 -05:00
Tom Fifield	6d6ed55ed7	Retire PPR Boards (#4956) ... The Othernet project appears to have failed. Retire these boards/variants.	2024-10-05 05:25:14 -05:00
dylanli	1293c5cdd4	Support for Seeed XIAO S3 Board (#4850) ... * feat: add seeed-xiao-s3 board defination and pins defination * chore: add SEEED XIAO S3 into mesh pb * fix: fix trunk fmt check failed * Trunk fmt variant.h * Restore automatically generated file --------- Co-authored-by: Tom Fifield <tom@tomfifield.net>	2024-09-25 18:27:14 +08:00
Mark Trevor Birss	5c4c0965af	Update nordic_pca10059.json	2024-09-19 15:41:59 +08:00
Mark Trevor Birss	7289b295e8	Update me25ls01-4y10td.json	2024-09-19 15:41:59 +08:00
Mark Trevor Birss	7c32ab3023	Update ms24sf1.json	2024-09-19 15:41:59 +08:00