937 Commits

Author	SHA1	Message	Date
Chloe Bethel	0952007805	Make ExternalNotification show up in excluded_modules, more STM32 modules (#7797) ... * Show ExternalNotification as excluded if it is * Enable ExternalNotification, SerialModule and RangeTest on STM32WL * Misc fixes for #7797 - ARCH_STM32 -> ARCH_STM32WL, use less flash by dropping weather station support for serialmodule, set tx/rx pins before begin * Enable Serial1 on RAK3172, make SerialModule use it (console is on LPUART1) * Fix SerialModule on RAK3172, fix board definition of RAK3172 to include the right pin mapping.	2025-09-02 07:08:57 -05:00
Tom Fifield	c5fad6cca1	Hold for 20s after GPS lock (#7801) ... * Hold for >20s after GPS lock GPS chips are designed to stay locked for a while to download some data and save it. This data is important for speeding up future locks, and making them higher quality. Our present configuration could make every lock perform similar to first lock. This patch sets a hold of between 20s and 10% of the lock search time after lock is acquired. This should allow the GPS to finish its work before we turn it off. Fixes https://github.com/meshtastic/firmware/issues/7466 * Remove T1000E-specific GPS holds The new code does the same thing, for all devices. * Fix publishing settings * Cleanups, removing unused variables. * ifdef log line with GPS_DEBUG * fixQual is not a bool.	2025-09-02 06:05:14 -05:00
Onyx Clawe	102c447fe3	Update variant.h (#7520) ... Updated ADC, Full charge now results in 100% charge being reported instead of 95% charge Co-authored-by: OnyxtheDragon <58921814+OnyxtheDragon@users.noreply.github.com>	2025-09-02 14:31:41 +10:00
Jonathan Bennett	ca79760372	Add support for the RV-3028 on native Linux (#7802)	2025-08-31 21:08:58 -05:00
Wilson	4a669032dc	Change user button to cancel button on meshtiny. (#7789)	2025-08-30 08:37:18 +08:00
Ben Meadors	8685436cbb	Merge pull request #7773 from meshtastic/master ... Backmerge	2025-08-27 20:53:55 -05:00
Ben Meadors	25a19b49ad	This one is not working yet	2025-08-27 15:18:26 -05:00
Ben Meadors	a4d96bebfb	Drop for now	2025-08-27 14:35:29 -05:00
Ben Meadors	26c38ffc8e	Remove debug logging	2025-08-27 11:55:27 -05:00
Ben Meadors	0903ed8232	Mesh solar integrate (#7764) ... * Added HELTEC MeshSolar board. (#7499) * Added HELTEC MeshSolar board. * Set emergency shutdown pin as high impedance * Set emergency shutdown pin as high impedance Set emergency shutdown pin as high impedance * Update variants/nrf52840/heltec_mesh_solar/variant.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update variants/nrf52840/heltec_mesh_solar/variant.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update variants/nrf52840/heltec_mesh_solar/variant.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update I2C SCL pin definition in variant.h --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Updates --------- Co-authored-by: Quency-D <55523105+Quency-D@users.noreply.github.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-08-27 06:02:54 -05:00
Ben Meadors	f8ba392a24	Add BaseUI support for L1 EInk (#7751) ... * Add BaseUI support for L1 EInk * Fix Eink offset * Add joystick * Updates * Adjust Seeed Wio Tracker L1 E-Ink variant (#7326) * Rename variant Needs the -inkhud suffix to work correctly with the web flasher * Display driver for ZJY122250_0213BAAMFGN * Remove dead code from nicheGraphics.h Remnants of T-Echo's nicheGraphics.h file, which was used as a template. * Use ZJY122250_0213BAAMFGN driver Improves display health. We don't need as many full refreshes now. * Tidying * board_check = true --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Consolidation * Add hack for existing InkHUD button functionality --------- Co-authored-by: todd-herbert <herbert.todd@gmail.com>	2025-08-26 20:29:11 -05:00
Manuel	596cd7e0b6	enable device telemetry (#7757)	2025-08-26 13:39:43 -05:00
Manuel	3f5c30e3b3	T-Lora Pager (#7613) ... * initial commit * preset rotary1 encoder * define TAB+ESC * haptic feedback * allow switch off haptic feedback * enable audio amplifier * include PR4684 * fix for tft target * add ES8311 audio codec * fix KB scan duplicate * display workaround to avoid debris * fix debris on display * keyboard backlight * enable screen options * fsm based bounce-free rotary encoder implementation * use fsm RotaryEncoder only for T-Lora Pager * change inputbroker default config to allow using rotary wheel for screens AND menues --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-26 09:35:25 -05:00
m1nl	5aa486d6c2	set HAS_32768HZ for Heltec V3 board	2025-08-25 19:56:15 +02:00
m1nl	ba26d03b1b	standarize values of HAS_32768HZ capability flag	2025-08-25 19:44:13 +02:00
Lewis He	5136c8ba24	The T-Deck-Pro 4G version sets the modem to be disabled by default. (#7715) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-23 06:46:59 -05:00
Jonathan Bennett	5ce47045e7	Add SDL option to BaseUI on Native (#7568) ... * Add SDL option to BaseUI on Native * Update to latest LovyanGFX PR and use LGFX_SDL define * Move SDL backend to native-sdl target	2025-08-20 12:51:14 -05:00
Wilson	f413c49555	Add Meshtiny device (#7676) ... * Add Meshtiny device - nRF52 OLED upDown encoder * Update platformio.ini * Update platformio.ini * Add GPS Exclude to Meshtiny. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-20 11:52:10 +08:00
Thomas Göttgens	9feb1d378e	Support for T-Echo Lite, credits to @Szetya for doing all the heavy lifting! (#7636) ... * Support for T-Echo Lite, credts to @Szetya for doing all the heavy lifting! * move define to ini file	2025-08-17 13:37:12 +02:00
Ben Meadors	a02017a5c8	Remove JSON serialization from most NRF52 targets (#7640) ... * Remove JSON serialization from most NRF52 targets * Slin networking base down for NRF52 by removing syslog * Update platformio.ini	2025-08-15 19:45:41 -05:00
Jonathan Bennett	4a241deb96	Thinknode button and backlight fixes (#7641) ... * Thinknode button and backlight fixes * Save backlight value between reboots	2025-08-15 14:41:21 -05:00
Austin	52f0e5a3db	Fix 'buildroot' target (OpenWRT) (#7620)	2025-08-14 12:31:25 -05:00
Jonathan Bennett	691327b2db	Initial support for the ThinkNode M5 (#7502) ... * Initial support for the ThinkNode M5 * Update variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini Co-authored-by: Austin <vidplace7@gmail.com> * Cleanup variant.h for Elecrow Thinknode M5 * Properly detect battery voltage * Turn backlight off when screen sleeps --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Austin <vidplace7@gmail.com>	2025-08-07 06:28:15 -05:00
Ben Meadors	88655ffc44	Move BLE toggle menu option and add confirmation for canned messages in L1 (#7516) ... * Move bluetooth to system menu and add confirmation for canned messages * Cruft * Handle else * Warn * Fixed screen reset	2025-07-31 07:34:41 -05:00
Thomas Göttgens	608fdc6f52	Santa may be checking his list twice, but we only need this in the platformio.ini (#7490)	2025-07-28 09:47:46 -05:00
Iris	fc1e6ccb8c	Rename Platformio.ini to platformio.ini (#7468)	2025-07-26 05:13:02 -05:00
Iris	bbc638ab82	Create Platformio.ini (#7450)	2025-07-25 15:36:37 -05:00
Austin	4f57a2e248	Build RP2350 (Pi Pico 2) (#7441)	2025-07-25 22:25:50 +02:00
Austin	4f895f744b	Take control of our PRs! (#7445)	2025-07-24 06:13:23 -05:00
Austin	6c12baf4ed	Migrate remaining variants to new dir structure (#7412)	2025-07-21 19:28:14 -05:00
Austin	9b983b6487	nRF52840: Migrate variants to new structure (#7396)	2025-07-21 14:13:02 -05:00
Manuel	b3525c2569	T-Deck Pro support (#6936) ... * initial draft * fix touchscreen * fix touchscreen * optimize GPS * battery management * cleanup comments * enable vibration motor * refactored TCA8418Keyboard * update HW_VENDOR id * manual fixes after merge * fix keyboard/BQ27220 detection * add BQ27220 * modify charge voltage and current * update XpowerLib * design capacity * try-fix charge behavior * improve Vbus detection * moved variant into esp32s3 folder --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>	2025-07-21 19:33:24 +02:00
Austin	475cfe4af2	ESP32s3: Migrate variants to new structure (#7343)	2025-07-20 16:47:37 -05:00
Thomas Göttgens	a9c9b96eb6	UDP for RAK4631 Eth Gw and the t-eth-elite. Solves #7149 (#7385) ... * UDP for RAK4631 Eth Gw and the t-eth-elite. Also enable IP output on Portduino. Solves #7149 * Copilot suggestion Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * fix portduino build * initialize local port --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-07-20 06:22:00 -05:00
Austin	1c2a3c620f	STM32: Migrate variants to new structure (#7389)	2025-07-20 06:21:17 -05:00
Austin	9313d04726	RP2040/RP2350: Migrate variants to new structure (#7345)	2025-07-20 06:20:57 -05:00
Austin	855514b4f3	ESP32c3: Migrate variants to new structure (#7342)	2025-07-19 19:55:33 -05:00
Austin	974741a366	ESP32: Initial sort variants by platform (#7340)	2025-07-19 18:41:59 -05:00
Ben Meadors	39716ed1ba	Fix L1 EInk HWModel (#7346)	2025-07-14 21:14:07 -05:00
Austin	5776385e8c	STM32 PlatformIO cleanup (#7339)	2025-07-14 12:52:21 -05:00
Daniel.Cao	e864fcf9a8	feat: add support for RAK Wismesh Tag hardware platform (#6853) ... * add new platform rak_wismeshtag * Remove RTC and Ethernet definitions from variant.h * Remove unused EINK and Ethernet definitions from variant.h and platformio.ini * Add WISMESH_TAG hardware model definition in architecture.h and update build flags in platformio.ini * Remove unused build flags and dependencies --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: daniel <daniel.cao@rakwireless.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>	2025-07-14 16:29:42 +02:00
Chloe Bethel	1be4fc5ae9	GPS for STM32WL (#7297) ... * Enable GPS for Wio-E5 variant on Serial2 * Add ability to override GPS serial port using GPS_SERIAL_PORT, and make RAK2560 use it. * Don't try to send ATAK packets if ATAK is disabled, +4k flash	2025-07-14 05:12:26 -05:00
Andrew Yong	b49e59b904	xiao_ble README.md updates (#7283) ... * docs(xiao_ble): Simplify building and flashing instructions - **Update Bootloader** - deleted this section, as Meshtastic now builds-in a compatible SoftDevice - **PlatformIO Environment Preparation** - deleted this section, as Meshtastic now builds-in a compatible SoftDevice - **Build Meshtastic** - simplified it greatly by referring to Meshtastic documentation - **Flash the firmware to the Xiao BLE** - simplified it greatly as Meshtastic now builds firmware.uf2; added some observations for a succesful flash Light cleanup of Markdown and renumbering of sections. Signed-off-by: Andrew Yong <me@ndoo.sg> * docs(xiao_ble): Replace some HTML with Markdown, cleanup Markdown Signed-off-by: Andrew Yong <me@ndoo.sg> * docs(xiao_ble): Update SX126X_TXEN definition location Signed-off-by: Andrew Yong <me@ndoo.sg> * docs(xiao_ble): Fresher information about E22 modules Signed-off-by: Andrew Yong <me@ndoo.sg> * docs(xiao_ble): Instructions for E22...M33S modules Also re-order the Build section to come after the Wiring section since the build instructions require special attention if the wiring/modules differ from the variant's expected pins/module. Signed-off-by: Andrew Yong <me@ndoo.sg> * docs(xiao_ble): Rename all XIAO BLE to XIAO nRF52840 Signed-off-by: Andrew Yong <me@ndoo.sg> * docs(xiao_ble): Remove note about Linux since shell script is gone Signed-off-by: Andrew Yong <me@ndoo.sg> * docs(xiao_ble): trunk fmt and fix links Signed-off-by: Andrew Yong <me@ndoo.sg> --------- Signed-off-by: Andrew Yong <me@ndoo.sg>	2025-07-13 06:17:50 -05:00
Andrew Yong	0133c5dc9e	feat: New variant esp32c3_super_mini (#7133) ... https://www.espboards.dev/esp32/esp32-c3-super-mini/ DIY build by @AntonKartajaya on Meshtastic Discord and a PCB version WIP by https://github.com/NomDeTom. - I2C - I2C_SDA: 1 - I2C_SCL: 0 - OLED: SSD1306 - GPS - GPS_RX_PIN: 20 - GPS_TX_PIN: 21 - Button - BUTTON_PIN: 9 - SPI - SCK: 10 - MISO: 6 - MOSI: 7 - CS: 8 - LoRa: SX1262 - LORA_RESET: 5 - LORA_DIO1: 3 - LORA_RXEN: 2 - LORA_BUSY: 4 Signed-off-by: Andrew Yong <me@ndoo.sg>	2025-07-13 06:12:24 -05:00
Andrew Yong	fd414ed149	feat: DIY Seeed XIAO nRF52840 + EBYTE E22 variants, pin-compatible with Wio-SX1262 kit (#7105) ... These DIY builds are functionally similar to the legacy xiao_ble variant, but use a pinout harmonized with the officially-supported XIAO nRF52840 & Wio-SX1262 Kit for Meshtastic (SKU 102010710). An additional E22-900M33S variant is provided to ensure SX1262 transmit power is set below the maximum PA input for that module, to avoid damaging it. - seeed_xiao_nrf52840_e22_900m30s: - XIAO nRF52840 + EBYTE E22-900M30S - EBYTE E22 pinout matching Wio-SX1262 (SKU 113010003) - I2C - SDA: D6 - SCL: D7 - User button: D0 - Gain is programmed in firmware - user Tx power setting is the desired final output power - seeed_xiao_nrf52840_e22_900m33s: - XIAO nRF52840 + EBYTE E22-900M33S - EBYTE E22 pinout matching Wio-SX1262 (SKU 113010003) - I2C - SDA: D6 - SCL: D7 - User button: D0 - Gain is programmed in firmware - user Tx power setting is the desired final output power Signed-off-by: Andrew Yong <me@ndoo.sg>	2025-07-13 15:58:01 +08:00
todd-herbert	1063ef9034	Shorter audio feedback for InkHUD buttons (#7301)	2025-07-11 17:30:48 +12:00
Kongduino	1aad442ccc	Update platformio.ini (#7289) ... The link to the product should point to the vendor's website, not a random distributor. Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>	2025-07-10 17:11:19 -05:00
Jonathan Bennett	0795b21c2b	Key verification flow on BaseUI (#7240)	2025-07-10 09:45:36 -05:00
todd-herbert	db4e4e6e53	Heltec Wireless Paper, VM-E213 Hardware Revisions (#7258) ... * Tests to identify display model * (InkHUD) SSD1682 controller IC Has a few quirks, gets its own base class * (InkHUD) E0213A367 Display For Heltec Wireless Paper V1.1.1, V1.2 For Heltec VM-E213 V1.1 * (InkHUD) Select display model at boot * (BaseUI) Wrapper to combine multiple GxEPD2 drivers Workaround for issue of GxEPD2_BW objects not having a shared base class. Allows us to select a driver at runtime. https://github.com/meshtastic/firmware/issues/6851#issuecomment-2905353447 * (BaseUI) Select E-Ink model at boot * (InkHUD) SSD1682 deep sleep * (InkHUD) No deep sleep for SSD1682 * (InkHUD) Fully no-op deep sleep for SSD1682	2025-07-08 13:01:48 -05:00
Jonathan Bennett	a6be2e46ed	2.7 fixes w2 (#7148) ... * Initial work on splitting notification renderer into components for reuse * More progress * Fix notification popup * more fix, less crash * Adjustments for OLED on keeping menus tidy, added Bluetooth Toggle to Home frame. Also widen the frame slightly if you have a scroll bar * Small changes for EInk to not crowd elements * Change System frame menu over to better match actions; added color picker for T114 * Fix build errors and add T190 for testing * Logic gates are hard sometimes * Screen Color Picker changes, defined Yellow as a Color. * Additional colors and tuning * Abandon std::sort in NodeDB, and associated fixes (#7175) * Generate short name for nodes that don't have user yet * Add reboot menu * Sort fixes * noop sort option to avoid infinite loop * Refactor Overlay Banner * Continuing work on Color Picker * Add BaseUI menus to add and remove Favorited Nodes * Create TFT_MESH_OVERRIDE for variants.h and defined colors * Trigger a NodeStatus update at the end of setup() to get fresh data on display at boot. * T114 defaults to White, Yellow is now bright Yellow * Revert "T114 defaults to White, Yellow is now bright Yellow" This reverts commit 8d05e17f11. * Only show OEM text if not OLED * Adjust OEM logo to maximize visible area * Start plumbing in Color Picker changes * Finished plumbing * Fix warning * Revert "Fix warning" This reverts commit 2e8aecd52d. * Fix display not fully redrawing * T-Deck should get color too * Emote Revamp * Update emotes.cpp * Poo Emote fix * Trunk fix * Add secret test menu and number picker * Missed bits * Save colors between reboots * Save Clock Face election to protobuf * Make reboot first, then settings * Add padding for single line pop-ups * Compass saving and faster menus * Resolve build issue with Excluding GPS * Resolve issue with memory bars on EInk * Add brightness settings for supported screen (#7182) * Add brightness menu. * add loop destination selection. * Bring back color (and sanity) to the menus! * Trunk --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Jason P <applewiz@mac.com> Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com> Co-authored-by: Wilson <m.tools@qq.com>	2025-07-02 20:50:49 -05:00