5633 Commits

Author	SHA1	Message	Date
Manuel	d66665b96e	fix: T-LoRa Pager / T-Deck Pro shutdown (#7792) ... * power down during LS and shutdown * fix T-Deck Pro shutdown * use device specific define * slightly rephrase the power off display message	2025-09-02 14:31:41 +10:00
Jonathan Bennett	ca79760372	Add support for the RV-3028 on native Linux (#7802)	2025-08-31 21:08:58 -05:00
Ben Meadors	a0e14439cb	Merge pull request #7785 from meshtastic/master ... Backmerge	2025-08-29 13:59:19 -05:00
Tom Fifield	11db6d4dcc	Can't trust RTCs to tell the time. (#7779) ... Further to https://github.com/meshtastic/firmware/pull/7772 , we discovered that some RTCs have hard-coded start times well in the past. This patch gives RTCs the same treatment as GPS - if the time is earlier than BUILD_EPOCH, we don't use it. Fixes #7771 Fixes #7750	2025-08-29 13:23:14 -05:00
Tom Fifield	10c6836263	Can't trust RTCs to tell the time. (#7779) ... Further to https://github.com/meshtastic/firmware/pull/7772 , we discovered that some RTCs have hard-coded start times well in the past. This patch gives RTCs the same treatment as GPS - if the time is earlier than BUILD_EPOCH, we don't use it. Fixes #7771 Fixes #7750	2025-08-29 13:22:23 -05:00
Ben Meadors	4e03df5ea7	Fix freetext hang (#7781) ... * Fixed freetext hangs by adding canned modules back to self-sourced packets and transition to SENDING_ACTIVE state * Update meshmodule handling	2025-08-29 12:09:22 -05:00
Ben Meadors	9b41131af8	Backmerge (#7782) ... * Merge pull request #7777 from meshtastic/create-pull-request/bump-version Bump release version * Only send Neighbours if we have some to send. (#7493) * Only send Neighbours if we have some to send. The original intent of NeighborInfo was that when a NeighbourInfo was sent all of the nodes that saw it would reply with NeighbourInfo. So, NeighbourInfo was sent even if there were no hop-zero nodes in the NodeDB. Since 2023, when this was implemented, our understanding of running city-wide meshes has improved substantially. We have taken steps to reduce the impact of NeighborInfo over LoRa. This change aligns with those ideas: we will now only send NeighborInfo if we have some neighbors to contribute. The impact of this change is that a node must first see another directly connected node in another packet type before NeighborInfo is sent. This means that a node with no neighbors is no longer able to trigger other nodes to broadcast NeighborInfo. It will, however, receive the regular periodic broadcast of NeighborInfo, and will be able to send NeighborInfo if it has at least 1 neighbor. * Include all the things * AvOid memleak * We don't gotTime if time is 2019. (#7772) There are certain GPS chips that have a hard-coded time in firmware that they will return before lock. We set our own hard-coded time, BUILD_EPOCH, that should be newer and use the comparison to not set a bad time. In https://github.com/meshtastic/firmware/pull/7261 we introduced the RTCSetResult and improved it in https://github.com/meshtastic/firmware/pull/7375 . However, the original try-fix left logic in GPS.cpp that could still result in broadcasting the bad time. Further, as part of our fix we cleared the GPS buffer if we didn't get a good time. The mesh was hurting at the time, so this was a reasonable approach. However, given time tends to come in when we're trying to get early lock, this had the potential side effect of throwing away valuable information to get position lock. This change reverses the clearBuffer and changes the logic so if time is not set it will not be broadcast. Fixes https://github.com/meshtastic/firmware/issues/7771 Fixes https://github.com/meshtastic/firmware/issues/7750 --------- Co-authored-by: Tom Fifield <tom@tomfifield.net>	2025-08-29 10:31:55 -05:00
Wilson	fb34dac08d	Add On-Screen Keyboard for UpDown Encoder and Rotary Encoder. (#7762) ... * Add On-Screen Keyboard for UpDownInterrupt. Pls notice the new keyboard layout was inspired and adviced by https://github.com/csrutil * Add longPress event for RotaryEncoder Press. * Update UpdownInterrupt UP and DOWN on main UI. * Change the interrupt trigger mode from rising edge to falling edge to improve button response.	2025-08-29 23:26:27 +08:00
Tom Fifield	d3e3a91096	We don't gotTime if time is 2019. (#7772) ... There are certain GPS chips that have a hard-coded time in firmware that they will return before lock. We set our own hard-coded time, BUILD_EPOCH, that should be newer and use the comparison to not set a bad time. In https://github.com/meshtastic/firmware/pull/7261 we introduced the RTCSetResult and improved it in https://github.com/meshtastic/firmware/pull/7375 . However, the original try-fix left logic in GPS.cpp that could still result in broadcasting the bad time. Further, as part of our fix we cleared the GPS buffer if we didn't get a good time. The mesh was hurting at the time, so this was a reasonable approach. However, given time tends to come in when we're trying to get early lock, this had the potential side effect of throwing away valuable information to get position lock. This change reverses the clearBuffer and changes the logic so if time is not set it will not be broadcast. Fixes https://github.com/meshtastic/firmware/issues/7771 Fixes https://github.com/meshtastic/firmware/issues/7750	2025-08-29 09:09:13 -05:00
Tom Fifield	5f8503c62d	We don't gotTime if time is 2019. (#7772) ... There are certain GPS chips that have a hard-coded time in firmware that they will return before lock. We set our own hard-coded time, BUILD_EPOCH, that should be newer and use the comparison to not set a bad time. In https://github.com/meshtastic/firmware/pull/7261 we introduced the RTCSetResult and improved it in https://github.com/meshtastic/firmware/pull/7375 . However, the original try-fix left logic in GPS.cpp that could still result in broadcasting the bad time. Further, as part of our fix we cleared the GPS buffer if we didn't get a good time. The mesh was hurting at the time, so this was a reasonable approach. However, given time tends to come in when we're trying to get early lock, this had the potential side effect of throwing away valuable information to get position lock. This change reverses the clearBuffer and changes the logic so if time is not set it will not be broadcast. Fixes https://github.com/meshtastic/firmware/issues/7771 Fixes https://github.com/meshtastic/firmware/issues/7750	2025-08-29 09:08:33 -05:00
Tom Fifield	b0e8321514	Only send Neighbours if we have some to send. (#7493) ... * Only send Neighbours if we have some to send. The original intent of NeighborInfo was that when a NeighbourInfo was sent all of the nodes that saw it would reply with NeighbourInfo. So, NeighbourInfo was sent even if there were no hop-zero nodes in the NodeDB. Since 2023, when this was implemented, our understanding of running city-wide meshes has improved substantially. We have taken steps to reduce the impact of NeighborInfo over LoRa. This change aligns with those ideas: we will now only send NeighborInfo if we have some neighbors to contribute. The impact of this change is that a node must first see another directly connected node in another packet type before NeighborInfo is sent. This means that a node with no neighbors is no longer able to trigger other nodes to broadcast NeighborInfo. It will, however, receive the regular periodic broadcast of NeighborInfo, and will be able to send NeighborInfo if it has at least 1 neighbor. * Include all the things * AvOid memleak	2025-08-28 18:45:46 -05:00
Jason P	dd2f77ea0c	BaseUI Show/Hide Frame Functionality (#7382) ... * Rename System Frame (from Memory) in code base * Create menu options to Show/Hide frames: Node Lists, Bearings, Position, LoRa, Clock and Favorites frames * Move Region Picker into submenu * Tweak wording for Send Position vs Node Info if the device has GPS	2025-08-28 11:23:24 -05:00
Ben Meadors	8685436cbb	Merge pull request #7773 from meshtastic/master ... Backmerge	2025-08-27 20:53:55 -05:00
Ben Meadors	834c3c5cc2	Add this back in	2025-08-27 16:24:57 -05:00
Ben Meadors	237b8908f7	Chainsaw took too much off the top	2025-08-27 09:54:39 -05:00
Ben Meadors	06bccef462	Reinstitute previous streamapi readStream	2025-08-27 07:17:46 -05:00
Ben Meadors	3120bb8fd7	Fix check	2025-08-27 06:50:53 -05:00
Ben Meadors	0903ed8232	Mesh solar integrate (#7764) ... * Added HELTEC MeshSolar board. (#7499) * Added HELTEC MeshSolar board. * Set emergency shutdown pin as high impedance * Set emergency shutdown pin as high impedance Set emergency shutdown pin as high impedance * Update variants/nrf52840/heltec_mesh_solar/variant.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update variants/nrf52840/heltec_mesh_solar/variant.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update variants/nrf52840/heltec_mesh_solar/variant.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update I2C SCL pin definition in variant.h --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Updates --------- Co-authored-by: Quency-D <55523105+Quency-D@users.noreply.github.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-08-27 06:02:54 -05:00
Ben Meadors	f8ba392a24	Add BaseUI support for L1 EInk (#7751) ... * Add BaseUI support for L1 EInk * Fix Eink offset * Add joystick * Updates * Adjust Seeed Wio Tracker L1 E-Ink variant (#7326) * Rename variant Needs the -inkhud suffix to work correctly with the web flasher * Display driver for ZJY122250_0213BAAMFGN * Remove dead code from nicheGraphics.h Remnants of T-Echo's nicheGraphics.h file, which was used as a template. * Use ZJY122250_0213BAAMFGN driver Improves display health. We don't need as many full refreshes now. * Tidying * board_check = true --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Consolidation * Add hack for existing InkHUD button functionality --------- Co-authored-by: todd-herbert <herbert.todd@gmail.com>	2025-08-26 20:29:11 -05:00
Ben Meadors	3dd384dd53	Null check	2025-08-26 19:45:26 -05:00
Jonathan Bennett	2c071a3283	Don't use pin 0 on RAK for input (#7755) ... * Don't use pin 0 on RAK for input * Use boolean instead of define --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-26 13:41:33 -05:00
Manuel	3f5c30e3b3	T-Lora Pager (#7613) ... * initial commit * preset rotary1 encoder * define TAB+ESC * haptic feedback * allow switch off haptic feedback * enable audio amplifier * include PR4684 * fix for tft target * add ES8311 audio codec * fix KB scan duplicate * display workaround to avoid debris * fix debris on display * keyboard backlight * enable screen options * fsm based bounce-free rotary encoder implementation * use fsm RotaryEncoder only for T-Lora Pager * change inputbroker default config to allow using rotary wheel for screens AND menues --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-26 09:35:25 -05:00
Ben Meadors	24204feb71	Merge pull request #7747 from m1nl/esp32-pm-capabability-flags ... Setup ESP32 PM-specific capability flags	2025-08-25 19:29:25 -05:00
Ben Meadors	4ace2638e1	Merge pull request #7718 from notmasteryet/err7info ... Log more information about ignored packet	2025-08-25 14:29:24 -05:00
m1nl	ba26d03b1b	standarize values of HAS_32768HZ capability flag	2025-08-25 19:44:13 +02:00
m1nl	9a1c2c9b61	setup flags which describe framework / device PM capabilties	2025-08-25 19:42:13 +02:00
Ben Meadors	f2ba7d7851	Merge pull request #7744 from meshtastic/master ... Backmerge to develop	2025-08-25 06:58:05 -05:00
Tom Fifield	1eafdfcbc8	Reduce power of EU433 to 10dBm (#7733) ... We are currently blocked from making the breaking change to fix EU_433 channel centres until 3.0 (https://github.com/meshtastic/firmware/issues/3371 ) However, as already updated in https://github.com/meshtastic/meshtastic/pull/919 the documentation, the power limit for EU_433 is 10dBm. We can change the power limit without breaking anything, so this patch sets the power limit to match the ETSI spec without changing any other settings.	2025-08-24 14:45:29 -05:00
Jonathan Bennett	915f882e1f	Pkc fix (#7722)	2025-08-24 10:13:18 -05:00
Lewis He	5136c8ba24	The T-Deck-Pro 4G version sets the modem to be disabled by default. (#7715) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-23 06:46:59 -05:00
Ben Meadors	8b42bf7a95	Don't reboot when setting lora config with portduino sim radio (#7716)	2025-08-23 05:47:51 -05:00
notmasteryet	1c329d9ffa	Log more information about ignored packet	2025-08-22 08:46:14 -05:00
Ben Meadors	093a37a2b0	On screen keyboard (#7705) ... * Add on-screen keyboard implementation on Trackball device. * Update On-Screen Keyboard to new layout. * The on-screen keyboard dynamically adjusts the key size based on the screen. * Improve input box display on small screens. * Optimize the virtual keyboard layout and cursor movement logic, and adjust the keyboard starting position for small and wide screens. * Optimize the text alignment of numeric keys on ssd1306. --------- Co-authored-by: whywilson <m.tools@qq.com>	2025-08-21 06:31:27 -05:00
Ben Meadors	1daf5aad1f	Revert "Add on-screen keyboard implementation on Trackball device. (#7625)" (#7704) ... This reverts commit fe3f14a63e.	2025-08-21 06:29:23 -05:00
Wilson	fe3f14a63e	Add on-screen keyboard implementation on Trackball device. (#7625) ... * Add on-screen keyboard implementation on Wio Tracker L1. * Update On-Screen Keyboard to new layout. * The on-screen keyboard dynamically adjusts the key size based on the screen. * Improve input box display on small screens. * Optimize the virtual keyboard layout and cursor movement logic, and adjust the keyboard starting position for small and wide screens. * Optimize the text alignment of numeric keys on ssd1306. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-21 18:01:31 +08:00
Jonathan Bennett	ce75bf4496	Initial stab at rak6421 autoconf (#7691) ... * Initial stab at rak6421 autoconf * trunk * Add crc check to eeprom autoconf * Trunk again	2025-08-20 14:18:20 -05:00
Jonathan Bennett	5ce47045e7	Add SDL option to BaseUI on Native (#7568) ... * Add SDL option to BaseUI on Native * Update to latest LovyanGFX PR and use LGFX_SDL define * Move SDL backend to native-sdl target	2025-08-20 12:51:14 -05:00
github-actions[bot]	890357d579	Update protobufs (#7693) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-08-20 05:53:20 -05:00
Ben Meadors	c19f573b49	Fix TLS port bug on default mqtt validation	2025-08-19 20:10:47 -05:00
Jonathan Bennett	5de61b1a3d	Only gate PKC behind the simradio CLI flag (#7681) ... * Only gate PKC behind the simradio CLI flag * Hide router.cpp simradio check behind #if ARCH_PORTDUINO	2025-08-19 14:15:05 -05:00
jake-b	e55084629a	Move heartbeat response before !available guard. (#7672) ... * Move heartbeat response before !available guard. * fix formatting. --------- Co-authored-by: Jake-B <jake-b@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-19 08:10:53 -05:00
github-actions[bot]	f65e2c639e	Update protobufs (#7679) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-08-19 05:35:25 -05:00
Jonathan Bennett	95200e8f6b	Adds rfswitch on Portduino (#7663) ... * Initial attempt to get rfswitch working on Portduino * Make portduino_config global	2025-08-18 16:33:52 -05:00
Manuel	78c5309e9a	apply 180 degree hw roration Indicator BaseUI (#7660)	2025-08-17 14:48:24 -05:00
Thomas Göttgens	9feb1d378e	Support for T-Echo Lite, credits to @Szetya for doing all the heavy lifting! (#7636) ... * Support for T-Echo Lite, credts to @Szetya for doing all the heavy lifting! * move define to ini file	2025-08-17 13:37:12 +02:00
Jonathan Bennett	e5e8683cdb	Don't update the NodeDB if the nodeinfo has a mismatching public key (#7652)	2025-08-17 05:56:06 -05:00
Jonathan Bennett	d538ad170c	Add onboard message for devices with screens (#7655) ... * Add onboard message for devices with screens * Add message for TFT	2025-08-17 05:55:00 -05:00
Jonathan Bennett	c64c196778	Wait for lead up before enable longlong action (#7648)	2025-08-16 06:10:44 -05:00
github-actions[bot]	0046d957f1	Update protobufs (#7647) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-08-15 21:42:51 +02:00
Jonathan Bennett	4a241deb96	Thinknode button and backlight fixes (#7641) ... * Thinknode button and backlight fixes * Save backlight value between reboots	2025-08-15 14:41:21 -05:00