5409 Commits

Author	SHA1	Message	Date
Tom	62e1974d09	Add clarifying note about AHT20 also being included with AHT10 library (#6787) ... * Update AHT10.h Add clarifying note about AHT20 also being included * Update AHT10.cpp Add clarifying note about AHT20 also being included	2025-05-11 17:17:37 +08:00
Nasimovy	97c3673eba	Merge branch 'master' into T-beam-display-no-touch	2025-05-10 09:06:14 +02:00
Ben Meadors	981ecfdb61	Add client notification before role based power saving (sleep) (#6759) ... * Add client notification before role based power saving (sleep) * Unsigned	2025-05-07 21:20:32 -05:00
Jonathan Bennett	3a6fc668d8	20948 compass support (#6707) ... * Add __has_include blocks for sensors * Put BMP and BME back in the right sensors * Split environmental_base to environmental_extra, to compile the working sensor libs for Native * Remove hard-coded checks for ARCH_PORTDUINO * Un-clobber bmx160 * Move BusIO to environmental_extra due to Armv7 compile error * Move to forked BusIO for the moment * Switch to Meshtastic ICM-20948 lib for Portduino support * Use 20948 for compass direction * Compass is more than just RAK4631 * Cleanup for 20948 compass * use Meshtastic branch of 20948 lib * Check for HAS_SCREEN for showing calibration screen * No accelerometerThread on STM32	2025-05-07 18:38:42 -05:00
Ben Meadors	6f256c06f6	Fix warning	2025-05-07 09:26:10 -05:00
Austin	62421a83fd	Fix EVENT_MODE on mqttless targets (#6750)	2025-05-06 13:12:25 -04:00
Nasimovy	8346ab4d86	Merge branch 'meshtastic:master' into T-beam-display-no-touch	2025-05-06 13:07:27 +02:00
github-actions[bot]	d75c91a760	[create-pull-request] automated change (#6732) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-05-04 08:39:59 -05:00
Austin	152b8b1b02	Revert "router: on linux add a mutex around the queue (#6709)" (#6726) ... This reverts commit 987623567a.	2025-05-02 13:53:25 -04:00
todd-herbert	10693c4569	Lock SPI bus while in use by InkHUD (#6719) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-02 06:20:56 -05:00
Ferdia McKeogh	947191a797	Add PA1010D GPS support (#6691)	2025-05-02 10:11:09 +08:00
Jorropo	987623567a	router: on linux add a mutex around the queue (#6709) ... UDP reception happens on an other thread, avoid data races and potential data corruption issues.	2025-05-01 06:32:20 -05:00
Manuel	a8ab6e82e6	MUI framebuffer support (#6703) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-30 20:50:30 -05:00
todd-herbert	5c005aaed5	Restore InkHUD to defaults on factory reset (#6637) ... * Erase InkHUD settings on factory reset * Documentation * Captialn't Lower case m. Also move the include statement to .cpp, because it doesn't really need to be in the .h	2025-05-01 12:28:05 +12:00
Jonathan Bennett	845088e45b	Add 100 msecond delay in tft_task_handler when deviceScreen is null (#6695) ... * Add 100 msecond delay in tft_task_handler when deviceScreen is null, to fix 100% usage bug * move portduino tft task creation into tftSetup * remove superfluous check * update platform-native commit --------- Co-authored-by: mverch67 <manuel.verch@gmx.de>	2025-04-30 06:17:24 -05:00
Ben Meadors	e0b1fdb5e8	Rate limit waypoints and alerts and increase to allow every 10 seconds instead of 5 (#6699) ... * Rate limit waypoints and alerts and increase to allow every 10 seconds instead of 5. * Update src/mesh/PhoneAPI.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Doot --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-04-30 06:08:10 -05:00
Jorropo	a7ef9e9c08	udp-multicast: remove the thread from the multicast thread API (#6685) ... * udp-multicast: remove the thread from the multicast thread API The whole API is parallel & asynchronous we don't need to start a thread ourself, the implementation probably does when we call start listening already. * Take copilot advice and call it a handler --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-30 05:52:42 -05:00
Nasimovy	00f623a488	Merge branch 'master' into T-beam-display-no-touch	2025-04-30 12:05:17 +02:00
Colin	72eae42b81	PMSA003I: add support for driving SET pin low while not actively taking a telemetry reading (#6569) ... * support manually shutting off power to the PMSA003I sensor when we aren't doing a telemetry reading * add comment about PMSA003I_WARMUP_MS to AirQualityTelemetry.cpp * fix typos, use arduino gpio defines instead of magic numbers * support manually shutting off power to the PMSA003I sensor when we aren't doing a telemetry reading * add comment about PMSA003I_WARMUP_MS to AirQualityTelemetry.cpp * fix typos, use arduino gpio defines instead of magic numbers * RAK4631: add PMSA003I_ENABLE_PIN define * fix indentation --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-29 06:31:01 -05:00
Nasimovy	7da03560b3	Merge branch 'master' into T-beam-display-no-touch	2025-04-29 10:08:05 +02:00
Jonathan Bennett	473ef1bc03	Step one of Linux Sensor support (#6673) ... * First addition of __has_include for sensor support * Add __has_include blocks for sensors * Put BMP and BME back in the right sensors * Make TelemetrySensor::setup() a pure virtual finction * Split environmental_base to environmental_extra, to compile the working sensor libs for Native * Remove hard-coded checks for ARCH_PORTDUINO * Un-clobber bmx160 * Move BusIO to environmental_extra due to Armv7 compile error * Move to forked BusIO for the moment * Enable HAS_SENSOR for Portduino * Move back to Adafruit BusIO after patch	2025-04-28 18:35:13 -05:00
nasimovy	addd294d24	remove debug + add fixed baudrate for gps	2025-04-23 12:57:31 +00:00
nasimovy	77b972c5f8	Merge branch 'T-beam-display-no-touch' of https://github.com/Nasimovy/meshtastic-firmware into T-beam-display-no-touch	2025-04-23 10:19:28 +00:00
nasimovy	a72e02b844	reverted the revert #6640 + increased speed, bleutooth is stable now on reconnection cold booth etc , GPS is still not working though	2025-04-23 10:19:15 +00:00
Nasimovy	aad4cbd3c6	Merge branch 'master' into T-beam-display-no-touch	2025-04-22 19:37:59 +00:00
GUVWAF	b1e35cd8b3	Fix preamble detected IRQ flag (#6653)	2025-04-22 14:21:29 -05:00
todd-herbert	70ced735d9	Correct a typing error in InkHUD display driver (#6651) ... * Fix LCMEN2R13EFC1 LUT A typing error when the driver was initially created. * Spelling..	2025-04-22 06:25:53 -05:00
nasimovy	a5ef03bc7e	removed debug lines, disabled bluetooth for now because of stack smashing protect failure	2025-04-21 18:19:44 +00:00
nasimovy	c11e1809db	cleanup + addition of defines for on screen keyboard and canned message module	2025-04-21 16:18:22 +00:00
Nasimovy	97a1a42940	Merge branch 'master' into T-beam-display-no-touch	2025-04-20 20:45:18 +00:00
nasimovy	ffe9728782	swap XY+ mirror X	2025-04-20 17:29:06 +00:00
nasimovy	3145061cae	working touchscreen but gestures not moving display	2025-04-20 15:41:20 +00:00
Austin	8812eadd44	Revert "Add IP Address Frame (#6615)" (#6639) ... This reverts commit 5d48d2c0a7.	2025-04-20 09:49:21 -05:00
Ben Meadors	48dc0e014c	Revert "Lib Update (#6510)" (#6640) ... This reverts commit e2f6600cb9.	2025-04-20 09:48:07 -05:00
nasimovy	ffa5476be3	it works.... is pressed was not working properly	2025-04-20 13:13:26 +00:00
nasimovy	71bc0098e9	revert to working example?	2025-04-20 10:08:49 +00:00
Nivek-domo	5d48d2c0a7	Add IP Address Frame (#6615) ... * Update Screen.cpp add ip on screen if has ethernet pcb like w5500 spi * Run Trunk Format and Translate Comments FR->EN --------- Co-authored-by: Tom Fifield <tom@tomfifield.net>	2025-04-20 20:06:39 +10:00
Nivek-domo	2b57ffafd7	Rak13800 Ethernet works on rak11310 too ... we can use rak13800 on rak11310 too	2025-04-20 18:51:01 +10:00
nasimovy	15c2094bf9	add -1 functionality for touch IRQ	2025-04-20 08:32:57 +00:00
nasimovy	f30f5281c1	i broke it , dont know how to fix at the moment will investigate	2025-04-19 21:28:34 +00:00
nasimovy	f5c3e77a60	changed to sensorlib 0.3.1	2025-04-19 20:48:06 +00:00
nasimovy	0f1e528b20	further testing	2025-04-19 15:43:55 +00:00
nasimovy	cb14fc3b9d	testing touchscreen code	2025-04-19 13:22:15 +00:00
nasimovy	43978af62b	trunk fmt	2025-04-18 09:21:46 +00:00
Nasimovy	e0d6fce99d	Merge branch 'meshtastic:master' into T-beam-display-no-touch	2025-04-18 09:06:35 +00:00
todd-herbert	74b3dc34e4	Fix crash when clearing NRF52 BLE bonds (#6609) ... * Fix crash before clearing BLE bonds * Prevent clients re-pairing BLE during factory reset Clients seem able to re-pair BLE after clearing bonds during factory reset, even after advertising disabled. This seems to primarily occur on Android devices, which seem to more actively maintain the BLE connection. As a workaround, `NRF52Bluetooth::shutdown` swaps the BLE pairing callback to one which actively rejects new connections. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-17 17:11:42 -05:00
Thomas Göttgens	e2f6600cb9	Lib Update (#6510) ... * Lib Update Draft because PIN display doesn't work yet. * pin entry still no worky * Fix for missing PIN code issue (#6574) --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Alexander Begoon <alex@begoonlab.tech>	2025-04-17 15:58:28 -05:00
Thomas Göttgens	ab35668d42	Merge branch 'master' into T-beam-display-no-touch	2025-04-17 22:43:02 +02:00
nasimovy	2f15fbae63	Merge branch 'T-beam-display-no-touch' of https://github.com/Nasimovy/meshtastic-firmware into T-beam-display-no-touch	2025-04-17 18:50:02 +00:00
nasimovy	3d8d6ef31f	refelct changes?	2025-04-17 18:49:46 +00:00
Thomas Göttgens	ef14967fbf	Crowpanel 2.4,2.8 and 3.5 support (#6355) ... Co-authored-by: mverch67 <manuel.verch@gmx.de>	2025-04-17 16:03:37 +02:00
github-actions[bot]	c177c6d655	[create-pull-request] automated change (#6610) ... Co-authored-by: caveman99 <25002+caveman99@users.noreply.github.com>	2025-04-17 05:33:42 -05:00
Benjamin Kyd	a36f21b29a	Fix compiler error in PowerFSM when WiFi is excluded (#6603)	2025-04-17 11:36:19 +02:00
dylanli	d74359abf0	add support for Seeed solar panel (#6597) ... * add seeed_solar_node * fix RF_SW problem * fix IIC problem * Update Button redefination * Add on-board flash pin defination * fix missing a ',' * update seeed sorlar panel defination * fix word spell * fix upstream change * fix upstream change * fix upstream change * fix formate * Restore the FLASH definition that was deleted by mistake and pull down the CS pin to ensure low power consumption * fix led defination conflict * Delete lib/device-ui directory * Restore protobufs submodule --------- Co-authored-by: WayenWeng <jinyuan.weng@seeed.cc>	2025-04-17 16:11:17 +10:00
Nasimovy	d55e3bf034	Merge branch 'master' into T-beam-display-no-touch	2025-04-17 04:45:29 +00:00
Benjamin Kyd	5fd64d4114	Fix uninitialised memory read (adminModule) (#6605)	2025-04-16 14:42:08 -05:00
nasimovy	a69c489acf	cleanup of redundant code	2025-04-16 18:49:53 +00:00
nasimovy	7867cf5590	try higher speeds + HSPI	2025-04-16 17:36:58 +00:00
nasimovy	b10af5b659	modified variant.h and merged ini file+testing on lower spi frequency for the lora module, display shield pumps out EMI?	2025-04-16 11:50:45 +00:00
nasimovy	acc0cfe773	added SPI Speed to constructor+ cleaned up variant.h	2025-04-16 11:33:15 +02:00
nasimovy	ee95455e22	forgot the simple scan case	2025-04-16 11:33:15 +02:00
nasimovy	0418568653	changes to get display centered+lib update	2025-04-16 11:33:15 +02:00
nasimovy	9efdf8bb57	add ST7796	2025-04-16 11:33:15 +02:00
Aaron.Lee	e5cd0d613c	Make startup screen show the short ID (#6591) ... * Update the short ID show on the boot up screen function	2025-04-16 11:20:12 +02:00
Benjamin Kyd	64c8bde04a	Update platformio.ini to exclude unused modules from t1000-e (#6584) ... * Update platformio.ini to exclude unused modules * Add No EXT GPIO flag and also correct some exclusions in main * CANNEDMSG != CANNEDMESSAGES * Remove NO_EXT_GPIO	2025-04-16 10:12:23 +02:00
github-actions[bot]	4477031971	[create-pull-request] automated change (#6599)	2025-04-16 09:46:06 +02:00
todd-herbert	cf5c8de92e	Fix spurious button presses on some T-Echos (#6590) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-15 20:33:44 -05:00
Tom Fifield	98411d408a	Trunk fixes for heltec mesh pocket. (#6588) ... https://github.com/meshtastic/firmware/pull/6533 was merged without running trunk. This patch fixes the newly introduced trunk errors.	2025-04-15 16:37:09 -05:00
Ben Meadors	040a34fca8	Switch to actually maintained thingsboard pubsubclient (#5204) ... * Switch to actually maintained thingsboard pubsubclient * .0 * TBPubSubClient * SetBufferSize is split into Send and Receive. * Update TBPubSubClient to 2.11 * Update platformio.ini Co-authored-by: Austin <vidplace7@gmail.com> * Re-add setBufferSize fix --------- Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Austin <vidplace7@gmail.com>	2025-04-15 10:50:24 -05:00
github-actions[bot]	4e30023a4b	[create-pull-request] automated change (#6589) ... Co-authored-by: fifieldt <1287116+fifieldt@users.noreply.github.com>	2025-04-15 06:41:33 -05:00
Aaron.Lee	b46aad85cc	Add new hardware: Heltec MeshPocket (#6533) ... * Add Heltec MeshPocket. * MeshPocket source code update * Optimiz code for refresh border during full update. * Update Heltec MeshPocket json file info.	2025-04-15 13:34:30 +10:00
Tavis	e7ce910c3b	Add generic thread module (#5484) ... * compiling, untested * use INCLUDE not EXLUDE for option to include module * protobuf update * working genericthread module Update protobufs * use EXCLUDE style instead of INCLUDE * Update Modules.cpp --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-11 19:38:44 +02:00
todd-herbert	06ce6f3e8a	fix: remove redundant GPS code targeting Heltec T114 (#6497)	2025-04-10 09:48:40 +10:00
todd-herbert	536b6d87c6	InkHUD support for LilyGo T3S3 E-Paper (#6503) ... * Purge an incomplete E-Ink driver * Use the deep-sleep mode of SSD16XX E-Ink displays * TwoButton doesn't need to store pin mode * Fix false positive button presses after light sleep * E-Ink driver for DEPG0213BNS800 * InkHUD support for LilyGo T3S3 E-paper --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-09 10:41:51 -05:00
GUVWAF	69f938ea98	Send UDP packet even if it's encrypted (#6524) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-09 06:13:49 -05:00
Ikko Eltociear Ashimine	1b1d4625aa	chore: update ubx.h (#6522) ... usefull -> useful	2025-04-08 14:04:33 -05:00
Thomas Göttgens	c94dd1e331	Minor adjustment of blink codes and 'unstick' the M2 button. (#6521)	2025-04-08 10:46:39 -05:00
Thomas Göttgens	a084073cc1	inkhud doesn't have a button thread (#6513)	2025-04-07 08:35:51 -05:00
Thomas Göttgens	606abfc116	Fix several features of M1 and M2 (i know what the 7 is now ...) (#6507) ... * Fix several features of M1 and M2 (i know what the 7 is now ...) * 'THe' should be 'The'. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * remove floating definition --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-07 05:46:22 -05:00
github-actions[bot]	860e8eca5a	[create-pull-request] automated change (#6511) ... Co-authored-by: caveman99 <25002+caveman99@users.noreply.github.com>	2025-04-07 11:51:05 +02:00
Chris LaFlash	56eb0c08b2	Add support for Quectel-L96, a MT3333 module (#6498)	2025-04-06 11:49:01 +08:00
Nasimovy	1b33189fe6	remove duplicate HAS_LP5562 introduced by #6422 (#6494)	2025-04-04 08:35:15 -05:00
todd-herbert	25237a15ff	feat: menu entry to send adhoc-ping (#6492)	2025-04-04 05:53:54 -05:00
Ben Meadors	0110275494	Revert "Try-fix ESP32 wifi disconnects (#6363)" (#6493) ... This reverts commit a902776e57.	2025-04-04 04:59:31 -05:00
github-actions[bot]	4dfba50304	[create-pull-request] automated change (#6490) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-04-03 20:23:44 -05:00
Nasimovy	7494106170	TCA8418 initial config + basic 3x4 keypad config (#6422) ... * TCA8418 with base config for 3x4 keypad * replaced k with uppercase K * change detection method * reflect changes #6381 --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-03 14:18:18 -05:00
rcarteraz	1017f6af35	remove very long slow (#6486)	2025-04-03 09:07:43 -05:00
Thomas Göttgens	594cb0cc1e	reinstate M1 Backlight (#6484)	2025-04-02 19:15:12 -05:00
Austin	ef18a9b5b5	meshtasticd: Set available.d dir in yaml (#6481)	2025-04-02 06:55:14 -05:00
Clément Hampaï	f6ed10f329	Added initial support for Texas Instruments LP5562 (#6381) ... * Added initial support for Texas Instrument LP5562 * Added proper support for Ambient Lighting * Code merge for all RBG_LED enabled devices * Fixed forgotten log_info & added firstRGBLED()	2025-04-01 22:39:40 +02:00
Benjamin Faershtein	644849126c	Fixes #6315 (#6475) ... * Fixed Canned Messages send to non broadcast * Small fix * Fix formatting for singular canned message * Trunk fmt --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-01 12:50:10 -05:00
Manuel	ea4ce8d827	MUI unPhone-tft: fix defaults (#6477)	2025-04-01 08:53:15 -05:00
todd-herbert	128c347c64	fix: T-Echo frontlight on at boot when using OLED UI (#6474)	2025-04-01 05:26:46 -05:00
Austin	2c01fad798	meshtasticd: Add FrequencyLabs MeshAdv-Mini Hat (#6458)	2025-03-31 07:31:54 -05:00
Ben Meadors	a5efbfccd7	Disable bluetooth config on rp2040, portduino (for now), and stm32 (#6465) ... * Disable bluetooth config on rp2040, portduino (for now), and stm32 * Add comments and exclude C6	2025-03-31 06:32:54 -05:00
todd-herbert	886bffe8f3	fix: honor user button customization (#6400) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-31 06:03:44 -05:00
Ben Meadors	39408fd3b1	Disable network config for non-eth_gateway nrf52 and non-W RP2040 targets (#6462) ... * Disable network config for non-eth_gateway nrf52 and non-W RP2040 targets * Use HAS_ETHERNET logic	2025-03-31 05:50:53 -05:00
Ben Meadors	72db671e00	Try-fix some import of configuration inconsistencies (#6364)	2025-03-31 09:54:27 +02:00
todd-herbert	bd2d2981c9	Add InkHUD driver for WeAct Studio 4.2" display module (#6384) ... * chore: todo.txt * chore: InkHUD documentation Word salad for maintainers * refactor: don't init system applets using onActivate System applets cannot be deactivated, so we will avoid using onActivate / onDeactivate methods entirely. * chore: update the example applets * fix: SSD16XX reset pulse Allow time for controller IC to wake. Aligns with manufacturer's suggestions. T-Echo button timing adjusted to prevent bouncing as a result(?) of slightly faster refreshes. * fix: allow timeout if display update fails Result is not graceful, but avoids total display lockup requiring power cycle. Typical cause of failure is poor wiring / power supply. * fix: improve display health on shutdown Two extra full refreshes, masquerading as a "shutting down" screen. One is drawn white-on-black, to really shake the pixels up. * feat: driver for display HINK_E042A87 As of Feb. 2025, these panels are used for "WeActStudio 4.2in B&W" display modules. * fix: inkhud rotation should default to 0 * Revert "chore: todo.txt" This reverts commit bea7df44a7. * fix: more generous timeout for display updates Previously this was tied to the expected duration of the update, but this didn't account for any delay if our polling thread got held up by an unrelated firmware task. * fix: don't use the full shutdown screen during reboot * fix: cooldown period during the display shutdown display sequence Observed to prevent border pixels from being locked in place with some residual charge?	2025-03-31 09:17:24 +02:00
todd-herbert	da26ff5b95	feat: more toggles for InkHUD menu (#6469) ... GPS on/off Wifi off -> Bluetooth on 12 / 24 hour clock	2025-03-31 09:15:54 +02:00