Commit Graph

205 Commits

Author SHA1 Message Date
Kevin Hester
1839f8f7ca fix #513 scale retransmission times based on true packet time on wire 2020-11-14 10:07:25 +08:00
Kevin Hester
68937d52fe bug #503 wip 2020-11-12 17:49:04 +08:00
Kevin Hester
bbc36f7b6f switch to my new SD 7.2.0 S113 based bootloader 2020-10-31 12:22:20 +08:00
Kevin Hester
d7368d5a51 begin deep sleep support for nrf52 2020-10-30 17:05:32 +08:00
Kevin Hester
47bbde3c60 fix #505 allow forced standby mode to not assert fail 2020-10-29 16:13:44 +08:00
Kevin Hester
04942a3570 fix #505 - device can reboot due to race condition in sending 2020-10-29 15:27:05 +08:00
Kevin Hester
cfcb62bd18 Make region changes take effect immedately 2020-10-29 13:26:36 +08:00
Kevin Hester
0767c8be03 PPR1 fix screen mirroring on LCD 2020-10-24 08:16:15 +08:00
Kevin Hester
c078c08c3e Merge branch 'dev' into ppr1 2020-10-23 16:53:38 +08:00
Kevin Hester
a5d7bacdbf Show current region on the boot screen 2020-10-21 17:27:13 +08:00
Kevin Hester
e1f0e11cb8 ppr1 WIP DO NOT MERGE - will break other clients 2020-10-17 13:15:12 +08:00
Kevin Hester
c73ee98739 Merge branch 'master' into ppr1 2020-10-17 11:00:28 +08:00
Kevin Hester
d9dcb33576
Merge branch 'master' into dev-https 2020-10-16 17:05:06 -07:00
Kevin Hester
22f23bb07d Merge branch 'dev' into ppr1
# Conflicts:
#	src/gps/NMEAGPS.cpp
2020-10-16 15:59:55 +08:00
Jm Casler
4ccbe6ff71
Merge pull request #480 from meshtastic/master
Updating dev-https from master
2020-10-15 19:40:01 -07:00
Kevin Hester
9134faaed1 turn off segger debug in ttgo eink build 2020-10-15 16:11:40 +08:00
Kevin Hester
5f2f3c94b9 PPR1 and allow boards to set lower or higher sx1262 power limits 2020-10-15 13:47:10 +08:00
Kevin Hester
1ebd7b0c3e make lightsleep default time 5 minutes, with 1 minute in for BLE syncing 2020-10-14 08:53:12 +08:00
Kevin Hester
5457541244 fix #477: sleep behavior was broken in app due to device bug since 1.1.1
+        // NOTE: The phone app needs to know the ls_secs value so it can properly expect sleep behavior.
+        // So even if we internally use 0 to represent 'use default' we still need to send the value we are
+        // using to the app (so that even old phone apps work with new device loads).
2020-10-14 08:45:29 +08:00
Jm Casler
76b4be3b87
Merge pull request #469 from mc-hamster/master
Switched to esp32_https_server from the Espressif (Issue #452) and Enable RX LNA (#466)
2020-10-10 22:28:08 -07:00
Kevin Hester
999b292717 fixes for the posix port 2020-10-11 09:18:47 +08:00
Jm Casler
c16acb904e Merge branch 'master' of https://github.com/mc-hamster/Meshtastic-device 2020-10-10 17:59:46 -07:00
Jm Casler
5b777219be Enable the RX LNA #466
Enabling the RX LNA
2020-10-10 17:59:32 -07:00
Kevin Hester
49b4ed2a89 coroutine: kinda works now 2020-10-10 18:03:45 +08:00
Kevin Hester
4b9ea4f808 Merge branch 'dev' into coroutine 2020-10-10 09:22:23 +08:00
Kevin Hester
95cb6b06e4 fix #462 publish immediately on any GPS state change
(don't wait until end of aquisition window)
2020-10-10 09:20:38 +08:00
Kevin Hester
2044427e97 coroutines: wip compiles but does not link 2020-10-09 14:16:51 +08:00
Kevin Hester
4a70ba1f7a fix nodeinfo stored times (I think) for @lgoix 2020-10-09 10:01:13 +08:00
Kevin Hester
7a4b8cde11 keep rf95 max power at 20 dBm so users don't smoke their boards 2020-10-08 10:51:31 +08:00
Kevin Hester
113859e791 increase sx1272 max power
+#define MAX_POWER 27
 // if we use 20 we are limited to 1% duty cycle or hw might overheat.  For continuous operation set a limit of 17
+// In theory up to 27 dBm is possible, but the modules installed in most radios can cope with a max of 20.  So BIG WARNING
+// if you set power to something higher than 17 or 20 you might fry your board.
2020-10-08 09:57:59 +08:00
Kevin Hester
023f1c24fb RTC: add notion of 'quality' for different time sources
Allow use of mesh based time until a GPS time arrives
2020-10-08 07:46:20 +08:00
Kevin Hester
f00d07baa3 RTC: pull rtc code into own file for cleanup 2020-10-08 07:28:57 +08:00
Kevin Hester
1a3cc40c7e sx1262 better to check for header because preamble might never result in irq 2020-10-08 06:23:05 +08:00
Kevin Hester
c0c83ad389 If we are not supposed to share locations make sure phone doesn't either 2020-10-07 17:46:25 +08:00
Kevin Hester
7a5832ab8a SX1262: fix serious bug with detecting if we have a rx packet in progress
Could cause hangs on the way into sleep (and enormous power consumption).
Instead of checking for rx packet length (which only changes at completion)
check if we've received preamble bits but haven't yet received a completed
packet interrupt.

notes:


wait to sleep loop problem
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
Can not send yet, busyRx
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0

vs normal run
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
Starting low level send (id=0x53fe1dd0 Fr0xe5 To0xff, WantAck0, HopLim3 encrypted)
Completed sending (id=0x53fe1dd0 Fr0xe5 To0xff, WantAck0, HopLim3 encrypted)
2020-10-07 13:43:51 +08:00
Kevin Hester
943d5cb08d bug #376 we were not staying in light sleep as long as intended 2020-10-06 11:48:53 +08:00
Kevin Hester
7480eb1826 Change to use zeros for timeout values that are 'default' 2020-10-06 09:43:00 +08:00
Kevin Hester
b072eec4ac wip for #376 2020-10-05 14:43:44 +08:00
geeksville
d66cede7fc Merge branch 'eink' into power 2020-10-01 07:51:01 -07:00
geeksville
3a638090a2 update protos for #376 2020-09-30 07:47:16 -07:00
Jm Casler
423cbc2c6d Added frequency information to debug output (#447) and cleanup of screen.cpp and meshwifi.cpp 2020-09-29 00:59:26 -07:00
geeksville
3e5f81bf2a move region into userpreferences, to end region specific firmwares 2020-09-25 12:52:08 -07:00
geeksville
1a064a4666 Merge remote-tracking branch 'root/master' 2020-09-25 09:19:58 -07:00
Jm Casler
b39f6c96bd Merge remote-tracking branch 'origin/dev-wifi' 2020-09-22 22:00:07 -07:00
comgram
55cb0c52ee Add Korean Frequency 2020-09-21 16:10:20 +09:00
geeksville
3c0429deee Add new factory_reset preferences option clients can set 2020-09-19 11:19:42 -07:00
Kevin Hester
5fb0bf2575
Merge branch 'master' into anz 2020-09-18 10:19:43 -07:00
geeksville
d3e28e3e2c Merge branch 'dev' 2020-09-17 11:20:41 -07:00
r51n
91305c2c84
add AU/NZ channel definitions 2020-09-17 12:02:38 +00:00
Jm Casler
c83ff03d66
Merge pull request #4 from meshtastic/master
Updating form head
2020-09-16 22:51:19 -07:00