5246 Commits

Author	SHA1	Message	Date
Tavis	b2ef92a328	add rain data from ws85 (#6242) ... add rain data as 1h and 24h	2025-03-06 10:55:08 +01:00
Andrik45719	b25db1f42c	E22-400M SX126X_DIO3_TCXO_VOLTAGE fix (#6232) ... Added TCXO voltage setting for SX1268 based module to fix error: Calibration failed, device errors: 0x20 SX126x init result -707	2025-03-06 09:44:53 +01:00
Chris Danis	f5e0e282b6	environment: add DPS310 high-accuracy barometer (#6237) ... * dps310: initial scan support * dps310 sensor support * new protobufs * new protobufs * address cr --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-06 11:58:18 +08:00
github-actions[bot]	a3a9b2fe84	[create-pull-request] automated change (#6240) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-03-05 20:50:20 -06:00
Ben Meadors	6c8058e1d8	Update SEEED_XIAO_NRF52840_KIT (#6239)	2025-03-06 09:44:22 +08:00
github-actions[bot]	239e5412b3	[create-pull-request] automated change (#6235) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-03-05 14:53:51 -06:00
Tom Fifield	2391982c1d	Only call GPS Probe commands once per family (#6114) ... In the GPS probe code we write commands on the serial line and determine which GPS we have based on the result. GPS units in the same family sometimes use the same command, but return different results (eg AG3335 and AG3332 both use $PAIR021*39). Currently we run the command once per GPS. Instead we should run each command only once per family, record the result, and select the GNSS MODEL based on the result, which is what this patch does. Before the change, we put 12 commands on the serial bus. Now we only put 6. This should markedly improve the speed and reliability of GPS detection. Fixes https://github.com/meshtastic/firmware/issues/5193 Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-04 09:47:06 -06:00
github-actions[bot]	050f0016c4	[create-pull-request] automated change (#6221)	2025-03-04 01:56:35 +01:00
Thomas Göttgens	6715662281	don't build the niche* stuff for non-inkHUD builds. (#6217)	2025-03-03 09:10:47 -06:00
GUVWAF	9893d24c62	Only request all NodeInfo/Position on fresh install (#6184) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-01 06:57:44 -06:00
Ben Meadors	99d3e5eb70	2.6 changes (#5806) ... * 2.6 protos * [create-pull-request] automated change (#5789) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Hello world support for UDP broadcasts over the LAN on ESP32 (#5779) * UDP local area network meshing on ESP32 * Logs * Comment * Update UdpMulticastThread.h * Changes * Only use router->send * Make NodeDatabase (and file) independent of DeviceState (#5813) * Make NodeDatabase (and file) independent of DeviceState * 70 * Remove logging statement no longer needed * Explicitly set CAD symbols, improve slot time calculation and adjust CW size accordingly (#5772) * File system persistence fixes * [create-pull-request] automated change (#6000) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Update ref * Back to 80 * [create-pull-request] automated change (#6002) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * 2.6 <- Next hop router (#6005) * Initial version of NextHopRouter * Set original hop limit in header flags * Short-circuit to FloodingRouter for broadcasts * If packet traveled 1 hop, set `relay_node` as `next_hop` for the original transmitter * Set last byte to 0xFF if it ended at 0x00 As per an idea of @S5NC * Also update next-hop based on received DM for us * temp * Add 1 retransmission for intermediate hops when using NextHopRouter * Add next_hop and relayed_by in PacketHistory for setting next-hop and handle flooding fallback * Update protos, store multiple relayers * Remove next-hop update logic from NeighborInfoModule * Fix retransmissions * Improve ACKs for repeated packets and responses * Stop retransmission even if there's not relay node * Revert perhapsRebroadcast() * Remove relayer if we cancel a transmission * Better checking for fallback to flooding * Fix newlines in traceroute print logs * Stop retransmission for original packet * Use relayID * Also when want_ack is set, we should try to retransmit * Fix cppcheck error * Fix 'router' not in scope error * Fix another cppcheck error * Check for hop_limit and also update next hop when `hop_start == hop_limit` on ACK Also check for broadcast in `getNextHop()` * Formatting and correct NUM_RETRANSMISSIONS * Update protos * Start retransmissions in NextHopRouter if ReliableRouter didn't do it * Handle repeated/fallback to flooding packets properly First check if it's not still in the TxQueue * Guard against clients setting `next_hop`/`relay_node` * Don't cancel relay if we were the assigned next-hop * Replies (e.g. tapback emoji) are also a valid confirmation of receipt --------- Co-authored-by: GUVWAF <thijs@havinga.eu> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com> * fix "native" compiler errors/warnings NodeDB.h * fancy T-Deck / SenseCAP Indicator / unPhone / PICOmputer-S3 TFT screen (#3259) * lib update: light theme * fix merge issue * lib update: home buttons + button try-fix * lib update: icon color fix * lib update: fix instability/crash on notification * update lib: timezone * timezone label * lib update: fix set owner * fix spiLock in RadioLibInterface * add picomputer tft build * picomputer build * fix compiler error std::find() * fix merge * lib update: theme runtime config * lib update: packet logger + T-Deck Plus * lib update: mesh detector * lib update: fix brightness & trackball crash * try-fix less paranoia * sensecap indicator updates * lib update: indicator fix * lib update: statistic & some fixes * lib-update: other T-Deck touch driver * use custom touch driver for Indicator * lower tft task prio * prepare LVGL ST7789 driver * lib update: try-fix audio * Drop received packets from self * Additional decoded packet ignores * Honor flip & color for Heltec T114 and T190 (#4786) * Honor TFT_MESH color if defined for Heltec T114 or T190 * Temporary: point lib_deps at fork of Heltec's ST7789 library For demo only, until ST7789 is merged * Update lib_deps; tidy preprocessor logic * Download debian files after firmware zip * set title for protobufs bump PR (#4792) * set title for version bump PR (#4791) * Enable Dependabot * chore: trunk fmt * fix dependabot syntax (#4795) * fix dependabot syntax * Update dependabot.yml * Update dependabot.yml * Bump peter-evans/create-pull-request from 6 to 7 in /.github/workflows (#4797) * Bump docker/build-push-action from 5 to 6 in /.github/workflows (#4800) * Actions: Semgrep Images have moved from returntocorp to semgrep (#4774) https://hub.docker.com/r/returntocorp/semgrep notes: "We've moved! Official Docker images for Semgrep now available at semgrep/semgrep." Patch updates our CI workflow for these images. Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Bump meshtestic from `31ee3d9` to `37245b3` (#4799) Bumps [meshtestic](https://github.com/meshtastic/meshTestic) from `31ee3d9` to `37245b3`. - [Commits](31ee3d90c8...37245b3d61) --- updated-dependencies: - dependency-name: meshtestic dependency-type: direct:production ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * [create-pull-request] automated change (#4789) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Bump pnpm/action-setup from 2 to 4 in /.github/workflows (#4798) Bumps [pnpm/action-setup](https://github.com/pnpm/action-setup) from 2 to 4. - [Release notes](https://github.com/pnpm/action-setup/releases) - [Commits](https://github.com/pnpm/action-setup/compare/v2...v4) --- updated-dependencies: - dependency-name: pnpm/action-setup dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Raspberry Pico2 - needs protos * Re-order doDeepSleep (#4802) Make sure PMU sleep takes place before I2C ends * [create-pull-request] automated change * heltec-wireless-bridge requires Proto PR first * feat: trigger class update when protobufs are changed * meshtastic/ is a test suite; protobufs/ contains protobufs; * Update platform-native to pick up portduino crash fix (#4807) * Hopefully extract and commit to meshtastic.github.io * CI fixes * [Board] DIY "t-energy-s3_e22" (#4782) * New variant "t-energy-s3_e22" - Lilygo T-Energy-S3 - NanoVHF "Mesh-v1.06-TTGO-T18" board - Ebyte E22 Series * add board_level = extra * Update variant.h --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> * Consolidate variant build steps (#4806) * poc: consolidate variant build steps * use build-variant action * only checkout once and clean up after run * Revert "Consolidate variant build steps (#4806)" (#4816) This reverts commit 9f8d86cb25. * Make Ublox code more readable (#4727) * Simplify Ublox code Ublox comes in a myriad of versions and settings. Presently our configuration code does a lot of branching based on versions being or not being present. This patch adds version detection earlier in the piece and branches on the set gnssModel instead to create separate setup methods for Ublox 6, Ublox 7/8/9, and Ublox10. Additionally, adds a macro to make the code much shorter and more readable. * Make trunk happy * Make trunk happy --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Consider the LoRa header when checking packet length * Minor fix (#4666) * Minor fixes It turns out setting a map value with the index notation causes an lookup that can be avoided with emplace. Apply this to one line in the StoreForward module. Fix also Cppcheck-determined highly minor performance increase by passing gpiochipname as a const reference :) The amount of cycles used on this laptop while learning about these callouts from cppcheck is unlikely to ever be more than the cycles saved by the fixes ;) * Update PortduinoGlue.cpp * Revert "Update classes on protobufs update" (#4824) * Revert "Update classes on protobufs update" * remove quotes to fix trunk. --------- Co-authored-by: Tom Fifield <tom@tomfifield.net> * Implement optional second I2C bus for NRF52840 Enabled at compile-time if WIRE_INFERFACES_COUNT defined as 2 * Add I2C bus to Heltec T114 header pins SDA: P0.13 SCL: P0.16 Uses bus 1, leaving bus 0 routed to the unpopulated footprint for the RTC (general future-proofing) * Tidier macros * Swap SDA and SCL SDA=P0.16, SCL=P0.13 * Refactor and consolidate time window logic (#4826) * Refactor and consolidate windowing logic * Trunk * Fixes * More * Fix braces and remove unused now variables. There was a brace in src/mesh/RadioLibInterface.cpp that was breaking compile on some architectures. Additionally, there were some brace errors in src/modules/Telemetry/AirQualityTelemetry.cpp src/modules/Telemetry/EnvironmentTelemetry.cpp src/mesh/wifi/WiFiAPClient.cpp Move throttle include in WifiAPClient.cpp to top. Add Default.h to sleep.cpp rest of files just remove unused now variables. * Remove a couple more meows --------- Co-authored-by: Tom Fifield <tom@tomfifield.net> * Rename message length headers and set payload max to 255 (#4827) * Rename message length headers and set payload max to 255 * Add MESHTASTIC_PKC_OVERHEAD * compare to MESHTASTIC_HEADER_LENGTH --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> * Check for null before printing debug (#4835) * fix merge * try-fix crash * lib update: fix neighbors * fix GPIO0 mode after I2S audio * lib update: audio fix * lib update: fixes and improvements * extra * added ILI9342 (from master) * device-ui persistency * review update * fix request, add handled * fix merge issue * fix merge issue * remove newline * remove newlines from debug log * playing with locks; but needs more testing * diy mesh-tab initial files * board definition for mesh-tab (not yet used) * use DISPLAY_SET_RESOLUTION to avoid hw dependency in code * no telemetry for Indicator * 16MB partition for Indicator * 8MB partition for Indicator * stability: add SPI lock before saving via littleFS * dummy for config transfer (#5154) * update indicator (due to compile and linker errors) * remove faulty partition line * fix missing include * update indicator board * update mesh-tab ILI9143 TFT * fix naming * mesh-tab targets * try: disable duplicate locks * fix nodeDB erase loop when free mem returns invalid value (0, -1). * upgrade toolchain for nrf52 to gcc 9.3.1 * try-fix (workaround) T-Deck audio crash * update mesh-tab tft configs * set T-Deck audio to unused 48 (mem mclk) * swap mclk to gpio 21 * update meshtab voltage divider * update mesh-tab ini * Fixed the issue that indicator device uploads via rp2040 serial port in some cases. * Fixed the issue that the touch I2C address definition was not effective. * Fixed the issue that the wifi configuration saved to RAM did not take effect. * rotation fix; added ST7789 3.2" display * dreamcatcher: assign GPIO44 to audio mclk * mesh-tab touch updates * add mesh-tab powersave as default * fix DIO1 wakeup * mesh-tab: enable alert message menu * Streamline board definitions for first tech preview. (#5390) * Streamline board definitions for first tech preview. TBD: Indicator Support * add point-of-checkin * use board/unphone.json --------- Co-authored-by: mverch67 <manuel.verch@gmx.de> * fix native targets * add RadioLib debugging options for (T-Deck) * fix T-Deck build * fix native tft targets for rpi * remove wrong debug defines * t-deck-tft button is handled in device-ui * disable default lightsleep for indicator * Windows Support - Trunk and Platformio (#5397) * Add support for GPG * Add usb device support * Add trunk.io to devcontainer * Trunk things * trunk fmt * formatting * fix trivy/DS002, checkov/CKV_DOCKER_3 * hide docker extension popup * fix trivy/DS026, checkov/CKV_DOCKER_2 * fix radioLib warnings for T-Deck target * wake screen with button only * use custom touch driver * define wake button for unphone * use board definition for mesh-tab * mesh-tab rotation upside-down * update platform native * use MESH_TAB hardware model definition * radioLib update (fix crash/assert) * reference seeed indicator fix commit arduino-esp32 * Remove unneeded file change :) * disable serial module and tcp socket api for standalone devices (#5591) * disable serial module and tcp socket api for standalone devices * just disable webserver, leave wifi available * disable socket api * mesh-tab: lower I2C touch frequency * log error when packet queue is full * add more locking for shared SPI devices (#5595) * add more locking for shared SPI devices * call initSPI before the lock is used * remove old one * don't double lock * Add missing unlock * More missing unlocks * Add locks to SafeFile, remove from `readcb`, introduce some LockGuards * fix lock in setupSDCard() * pull radiolib trunk with SPI-CS fixes * change ContentHandler to Constructor type locks, where applicable --------- Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: GUVWAF <thijs@havinga.eu> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> * T-Deck: revert back to lovyanGFX touch driver * T-Deck: increase allocated PSRAM by 50% * mesh-tab: streamline target definitions * update RadioLib 7.1.2 * mesh-tab: fix touch rotation 4.0 inch display * Mesh-Tab platformio: 4.0inch: increase SPI frequency to max * mesh-tab: fix rotation for 3.5 IPS capacitive display * mesh-tab: fix rotation for 3.2 IPS capacitive display * restructure device-ui library into sub-directories * preparations for generic DisplayDriverFactory * T-Deck: increase LVGL memory size * update lib * trunk fmt --------- Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: Jason Murray <15822260+scruplelesswizard@users.noreply.github.com> Co-authored-by: Jason Murray <jason@chaosaffe.io> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Austin <vidplace7@gmail.com> Co-authored-by: virgil <virgil.wang.cj@gmail.com> Co-authored-by: Mark Trevor Birss <markbirss@gmail.com> Co-authored-by: Kalle Lilja <15094562+ThatKalle@users.noreply.github.com> Co-authored-by: GUVWAF <thijs@havinga.eu> * Version this * Update platformio.ini (#6006) * tested higher speed and it works * Un-extra * Add -tft environments to the ci matrix * Exclude unphone tft for now. Something is wonky * fixed Indicator touch issue (causing IO expander issues), added more RAM * update lib * fixed Indicator touch issue (causing IO expander issues), added more RAM (#6013) * increase T-Deck PSRAM to avoid too early out-of-memory when messages fill up the storage * update device-ui lib * Fix T-Deck SD card detection (#6023) * increase T-Deck PSRAM to avoid too early out-of-memory when messages fill up the storage * fix SDCard for T-Deck; allow SPI frequency config * meshtasticd: Add X11 480x480 preset (#6020) * Littlefs per device * 2.6 update * [create-pull-request] automated change (#6037) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * InkHUD UI for E-Ink (#6034) * Decouple ButtonThread from sleep.cpp Reorganize sleep observables. Don't call ButtonThread methods inside doLightSleep. Instead, handle in class with new lightsleep Observables. * InkHUD: initial commit (WIP) Publicly discloses the current work in progress. Not ready for use. * feat: battery icon * chore: implement meshtastic/firmware #5454 Clean up some inline functions * feat: menu & settings for "jump to applet" * Remove the beforeRender pattern It hugely complicates things. If we can achieve acceptable performance without it, so much the better. * Remove previous Map Applet Needs re-implementation to work without the beforeRender pattern * refactor: reimplement map applet Doesn't require own position Doesn't require the beforeRender pattern to precalculate; now all-at-once in render Lays groundwork for fixed-size map with custom background image * feat: autoshow Allow user to select which applets (if any) should be automatically brought to foreground when they have new data to display * refactor: tidy-up applet constructors misc. jobs including: - consistent naming - move initializer-list-only constructors to header - give derived applets unique identifiers for MeshModule and OSThread logging * hotfix: autoshow always uses FAST update In future, it *will* often use FAST, but this will be controlled by a WindowManager component which has not yet been written. Hotfixed, in case anybody is attempting to use this development version on their deployed devices. * refactor: bringToForeground no longer requests FAST update In situations where an applet has moved to foreground because of user input, requestUpdate can be manually called, to upgrade to FAST refresh. More permanent solution for #23e1dfc * refactor: extract string storage from ThreadedMessageApplet Separates the code responsible for storing the limited message history, which was previously part of the ThreadedMessageApplet. We're now also using this code to store the "most recent message". Previously, this was stored in the `InkHUD::settings` struct, which was much less space-efficient. We're also now storing the latest DM, laying the foundation for an applet to display only DMs, which will complement the threaded message applet. * fix: text wrapping Attempts to fix a disparity between `Applet::printWrapped` and `Applet::getWrappedTextHeight`, which would occasionally cause a ThreadedMessageApplet message to render "too short", overlapping other text. * fix: purge old constructor This one slipped through the last commit.. * feat: DM Applet Useful in combination with the ThreadedMessageApplets, which don't show DMs * fix: applets shouldn't handle events while deactivated Only one or two applets were actually doing this, but I'm making a habit of having all applets return early from their event handling methods (as good practice), even if those methods are disabled elsewhere (e.g. not observing observable, return false from wantPacket) * refactor: allow requesting update without requesting autoshow Some applets may want to redraw, if they are displayed, but not feel the information is worth being brought to foreground for. Example: ActiveNodesApplet, when purging old nodes from list. * feat: custom "Recently Active" duration Allows users to tailor how long nodes will appear in the "Recents" applets, to suit the activity level of their mesh. * refactor: rename some applets * fix: autoshow * fix: getWrappedTextHeight Remove the "simulate" option from printWrapped; too hard to keep inline with genuine printing (because of AdafruitGFX Fonts' xAdvance, mabye?). Instead of simulating, we printWrapped as normal, and discard pixel output by setting crop. Both methods are similarly inefficient, apparently. * fix: text wrapping in ThreadedMessageApplet Wrong arguments were passed to Applet::printWrapped * feat: notifications for text messages Only shown if current applet does not already display the same info. Autoshow takes priority over notifications, if both would be used to display the same info. * feat: optimize FAST vs FULL updates New UpdateMediator class counts the number of each update type, and suggets which one to use, if the code doesn't already have an explicit prefence. Also performs "maintenance refreshes" unprovoked if display is not given an opportunity to before a FULL refresh through organic use. * chore: update todo list * fix: rare lock-up of buttons * refactor: backlight Replaces the initial proof-of-concept frontlight code for T-Echo Presses less than 5 seconds momentarily illuminate the display Presses longer than 5 seconds latch the light, requiring another tap to disable If user has previously removed the T-Echo's capacitive touch button (some DIY projects), the light is controlled by the on-screen menu. This fallback is used by all T-Echo devices, until a press of the capacitive touch button is detected. * feat: change tile with aux button Applied to VM-E290. Working as is, but a refactor of WindowManager::render is expected shortly, which will also tidy code from this push. * fix: specify out-of-the-box tile assignments Prevents placeholder applet showing on initial boot, for devices which use a mult-tile layout by default (VM-E290) * fix: verify settings version when loading * fix: wrong settings version * refactor: remove unimplemented argument from requestUpdate Specified whether or not to update "async", however the implementation was slightly broken, Applet::requestUpdate is only handled next time WindowManager::runOnce is called. This didn't allow code to actually await an update, which was misleading. * refactor: renaming Applet::render becomes Applet::onRender. Tile::displayedApplet becomes Tile::assignedApplet. New onRender method name allows us to move some of the pre and post render code from WindowManager into new Applet::render method, which will call onRender for us. * refactor: rendering Bit of a tidy-up. No intended change in behavior. * fix: optimize refresh times Shorter wait between retrying update if display was previously busy. Set anticipated update durations closer to observed values. No signifacant performance increase, but does decrease the amount of polling required. * feat: blocking update for E-Ink Option to wait for display update to complete before proceeding. Important when shutting down the device. * refactor: allow system applets to lock rendering Temporarily prevents other applets from rendering. * feat: boot and shutdown screens * feat: BluetoothStatus Adds a meshtastic::Status object which exposes the state of the Bluetooth connection. Intends to allow decoupling of UI code. * feat: Bluetooth pairing screen * fix: InkHUD defaults not honored * fix: random Bluetooth pin for NicheGraphics UIs * chore: button interrupts tested * fix: emoji reactions show as blank messages * fix: autoshow and notification triggered by outgoing message * feat: save InkHUD data before reboot Implemented with a new Observable. Previously, config and a few recent messages were saved on shutdown. These were lost if the device rebooted, for example when firmware settings were changed by a client. Now, the InkHUD config and recent messages saved on reboot, the same as during an intentional shutdown. * feat: imperial distances Controlled by the config.display.units setting * fix: hide features which are not yet implemented * refactor: faster rendering Previously, only tiles which requested update were re-rendered. Affected tiles had their region blanked before render, pixel by pixel. Benchmarking revealed that it is significantly faster to memset the framebuffer and redraw all tiles. * refactor: tile ownership Tiles and Applets now maintain a reciprocal link, which is enforced by asserts. Less confusing than the old situation, where an applet and a tile may disagree on their relationship. Empty tiles are now identified by a nullptr *Applet, instead of by having the placeholderApplet assigned. * fix: notifications and battery when menu open Do render notifications in front of menu; don't render battery icon in front of menu. * fix: simpler defaults Don't expose new users to multiplexed applets straight away: make them enable the feature for themselves. * fix: Inputs::TwoButton interrupts, when only one button in use * fix: ensure display update is complete when ESP32 enters light sleep Many panels power down automatically, but some require active intervention from us. If light sleep (ESP32) occurs during a display update, these panels could potentially remain powered on, applying voltage the pixels for an extended period of time, and potentially damaging the display. * fix: honor per-variant user tile limit Set as the default value for InkHUD::settings.userTiles.maxCount in nicheGraphics.h * feat: initial InkHUD support for Wireless Paper v1.1 and VM-E213 * refactor: Heard and Recents Applets Tidier code, significant speed boost. Possibly no noticable change in responsiveness, but rendering now spends much less time blocking execution, which is important for correction functioning of the other firmware components. * refactor: use a common pio base config Easier to make any future PlatformIO config changes * feat: tips Show information that we think the user might find helpful. Some info shown first boot only. Other info shown when / if relevant. * fix: text wrapping for '\n' Previously, the newline was honored, but the adojining word was not printed. * Decouple ButtonThread from sleep.cpp Reorganize sleep observables. Don't call ButtonThread methods inside doLightSleep. Instead, handle in class with new lightsleep Observables. * feat: BluetoothStatus Adds a meshtastic::Status object which exposes the state of the Bluetooth connection. Intends to allow decoupling of UI code. * feat: observable for reboot * refactor: Heltec VM-E290 installDefaultConfig * fix: random Bluetooth pin for NicheGraphics UIs * update device-ui: fix touch/crash issue while light sleep * Collect inkhud * fix: InkHUD shouldn't nag about timezone (#6040) * Guard eink drivers w/ MESHTASTIC_INCLUDE_NICHE_GRAPHICS * Case sensitive perhaps? * More case-sensitivity instances * Moar * RTC * Yet another case issue! * Sigh... * MUI: BT programming mode (#6046) * allow BT connection with disabled MUI * Update device-ui --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * MUI: fix nag timeout, disable BT programming mode for native (#6052) * allow BT connection with disabled MUI * Update device-ui * MUI: fix nag timeout default and remove programming mode for native --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * remove debuglog leftover * Wireless Paper: remove stray board_level = extra (#6060) Makes sure the InkHUD version gets build into the release zip * Fixed persistence stragglers from NodeDB / Device State divorce (#6059) * Increase `MAX_THREADS` for InkHUD variants with WiFi (#6064) * Licensed usage compliance (#6047) * Prevent psk and legacy admin channel on licensed mode * Move it * Consolidate warning strings * More holes * Device UI submodule bump * Prevent licensed users from rebroadcasting unlicensed traffic (#6068) * Prevent licensed users from rebroadcasting unlicensed traffic * Added method and enum to make user license status more clear * MUI: move UI initialization out of main.cpp and adding lightsleep observer + mutex (#6078) * added device-ui to lightSleep observers for handling graceful sleep; refactoring main.cpp * bump lib version * Update device-ui * unPhone TFT: include into build, enable SD card, increase PSRAM (#6082) * unPhone-tft: include into build, enable SD card, increase assigned PSRAM * lib update * Backup / migrate pub private keys when upgrading to new files in 2.6 (#6096) * Save a backup of pub/private keys before factory reset * Fix licensed mode warning * Unlock spi on else file doesn't exist * Update device-ui * Update protos and device-ui * [create-pull-request] automated change (#6129) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Proto * [create-pull-request] automated change (#6131) * Proto update for backup * [create-pull-request] automated change (#6133) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Update protobufs * Space * [create-pull-request] automated change (#6144) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Protos * [create-pull-request] automated change (#6152) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Updeet * device-ui lib update * fix channel OK button * device-lib update: fix settings panel -> no scrolling * device-ui lib: last minute update * defined(SENSECAP_INDICATOR) * MUI hot-fix pub/priv keys * MUI hot-fix username dialog * MUI: BT programming mode button * Update protobufs --------- Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com> Co-authored-by: GUVWAF <thijs@havinga.eu> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: Jason Murray <15822260+scruplelesswizard@users.noreply.github.com> Co-authored-by: Jason Murray <jason@chaosaffe.io> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Austin <vidplace7@gmail.com> Co-authored-by: virgil <virgil.wang.cj@gmail.com> Co-authored-by: Mark Trevor Birss <markbirss@gmail.com> Co-authored-by: Kalle Lilja <15094562+ThatKalle@users.noreply.github.com> Co-authored-by: rcarteraz <robert.l.carter2@gmail.com>	2025-03-01 06:18:33 -06:00
github-actions[bot]	088fce7d11	[create-pull-request] automated change (#6181) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-03-01 05:09:59 -06:00
Austin	b437f0fb54	More trunk junk / remove old workflows (#6153)	2025-02-27 09:43:01 +08:00
Karch	ffe4e7b6be	Add some minor additional options to userPrefs.jsonc (#6137) ... * added some additional userPrefs options * linted * some further changes * fixed some option ordering	2025-02-27 08:57:43 +08:00
Mictronics	598cfcc081	Cast user pref strings. (#6123)	2025-02-27 08:21:03 +08:00
Austin	4e575872da	junk in the Trunk (#6149)	2025-02-25 16:41:45 +08:00
Tom Fifield	7d8e0ede6c	Reduce some log levels. (#6127) ... This patch takes a few LOG_INFO messages and turns them into LOG_DEBUG. The logs appear to be mostly useful to developers, rather than end users and as such placing them at INFO level is too high a priority.	2025-02-23 06:14:37 -06:00
github-actions[bot]	efca2b5849	[create-pull-request] automated change (#6122) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-02-22 11:19:07 -06:00
GUVWAF	cfcd9cc210	Revert "Rak4631 remove spi1 (#6042)" (#6121) ... This reverts commit 9b46cb4ef0.	2025-02-22 08:03:05 -06:00
Tom Fifield	fe1ced7480	GPS Factory Reset no longer needed. (#6116) ... In 2020 there was a bad batch of tbeams whose ubloxen went a little loopy. We factory reset them to bring them sane again. It's now 2025, the problem with tbeam is long fixed, and this is not necessary for any other devices we're aware of. Removing the function to make our code more maintainable. There is an associated protobuf entry did_gps_reset that we might be able to re-purpose for something else, or remove in 3.0.	2025-02-21 16:53:46 -06:00
Ben Meadors	1be28520a7	Perhaps fix TXCO reports on pro-micro (#6110) ... * Perhaps fix TXCO reports on pro-micro * Missed one	2025-02-21 08:30:09 +08:00
GUVWAF	4942c7b71f	Fix PowerTelemetry initialization (#6106)	2025-02-20 15:28:01 -06:00
GUVWAF	4709d21df8	Ignore and disallow multi-hop traceroutes destined to broadcast address (#6109) ... * Ignore traceroutes destined to broadcast address * Disallow multi-hop traceroute request to broadcast address * Allow zero-hop broadcast requests	2025-02-20 14:34:09 -06:00
Tom Fifield	ec0eafedab	Move variant-specific lines back to variant (#6044) ... Last release a change introduced different branching functions in gps.cpp based on the model of a device. This makes the code less readable and introduces the potential for bugs. This patch creates a new variable, GPS_PROBETRIES that can be set in variant.h of devices that will control how many times we will probe for GPS presence. It sets up the T1000-E to use this variable and cleans the code in gps.c	2025-02-20 07:48:37 -06:00
rostekus	994e22aba9	feat: added BMP-390 support to the BMP-3xx sensors (#6103)	2025-02-20 21:36:49 +08:00
Mictronics	9930bba3f5	Add Pico2W variant including Wifi support. (#6062)	2025-02-20 10:56:34 +01:00
Ikko Eltociear Ashimine	79b3a1e60e	chore: update unishox2.h (#6092) ... occuring -> occurring	2025-02-19 12:58:41 +01:00
noahhaon	c67aa25d19	Add missing traceroute fields to serialized JSON output (#6087)	2025-02-18 13:25:55 -06:00
Eric Severance	3b0232de1b	Validate MQTT config by testing a connection (#6076)	2025-02-17 15:03:44 -06:00
A_Ponzano	7eb77276cd	Add support for new NRF52 board, MeshLink (#5736) ... * Add support for MeshLink * Updated, enabled watchdog and added button definition * added eink variant and removed some compile errors * Small board json file edit * Finally got trunk working (somehow?), this is just cleanup with trunk fmt * Various improvements and cleanup. Removed the use of PIN_3V3_En and defined a specific WD_EN pin instead for better clarity. Will do a bit more testing asap to make sure everything still works as intended :) * Enable on-board QSPI Flash * run trunk fmt with clang-format --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Austin <vidplace7@gmail.com>	2025-02-16 19:49:17 -06:00
Eric Severance	7648391f91	Reject invalid configuration for the default MQTT server (#6066) ... * Sanity check configuration for the default MQTT server * Skip for MESHTASTIC_EXCLUDE_MQTT --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-02-16 07:15:30 -06:00
GUVWAF	27fea5fc07	Fix STM32WL TCXO setting; enable logs and modules (#6063) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-02-15 09:06:10 -06:00
Michael Gjelsø	2f6cd02111	Typo for Bandit button LEDs (#6053) ... Changed Button 2 LED index define from BUTTON1_COLOR_INDEX to correct BUTTON2_COLOR_INDEX	2025-02-15 08:06:41 -06:00
GUVWAF	8c9947b05c	Allow NeighborInfo on non-default frequency slot (#6061)	2025-02-15 07:55:51 -06:00
Eric Severance	50b7d6a0f7	Establish MQTT connection only from MQTT::runOnce (#6057) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-02-14 20:32:41 -06:00
Eric Severance	c83ffd4911	Consider the MQTT TLS remote IP when enabled. (#6058)	2025-02-14 19:19:50 -06:00
Woutvstk	9b46cb4ef0	Rak4631 remove spi1 (#6042) ... * Removed non-existant SPI1 interface on rak4631 * trunk fmt	2025-02-14 12:53:22 -06:00
nwilde1590	7fdd262d55	Added custom OCV array values for T1000-E (#6031)	2025-02-11 14:02:21 +08:00
github-actions[bot]	4e2b47cc67	[create-pull-request] automated change (#6027) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-02-10 15:02:42 -06:00
Jason P	da1d78c882	Add support for 12- and 24-hour clock, Minor Settings Frame Adjustment (#5988) ... * 12- or 24-hour clock work in progress * 12- and 24-hour added to Settings Frame. Also some adjustments to screen layout. * Updated Uptime wording to be "Up" to fit within screen real estate * Removed label from uptime to conserve additional space --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-02-10 14:30:43 -06:00
ChangYanChu	d70a9392af	improve UTF-8 string handling in JSONValue (#6011) ... ```text feat(json): improve UTF-8 string handling in JSONValue - Add proper UTF-8 multi-byte character sequence handling - Add boundary checks for UTF-8 sequences - Keep original code structure and flow - Add detailed comments for UTF-8 processing logic This change improves the robustness of JSON string handling while maintaining compatibility with existing code.	2025-02-08 20:03:44 +08:00
dylanli	4e8c4f0d55	T1000-E hardware updates and GPS positioning accuracy optimisation (#6003) ... * T1000-E button setting update * T1000-E GNSS lock error fix * T1000-E GNSS improve detection success --------- Co-authored-by: WayenWeng <jinyuan.weng@seeed.cc>	2025-02-07 10:02:56 +02:00
lizthedeveloper	4a6a0efcfd	log the nonce value at DEBUG instead of INFO (#6001) ... you're leaking the nonce to stdout, if your logs are routed to a folder, this logs the nonce every time, leading to replay attack surface area being higher. Changed to debug.	2025-02-07 08:29:48 +08:00
Manuel	9db51a72a4	Fix T-Deck/T-Watch no BT (#5998) ... fixes #5997	2025-02-06 14:11:17 -06:00
github-actions[bot]	1b457bcfbb	[create-pull-request] automated change (#5985) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-02-03 20:47:51 -06:00
Thomas Göttgens	5c17afb2ac	Clean up some legacy macro definitions (#5983)	2025-02-03 09:36:05 -06:00
Tom Fifield	8cacdb65d6	Fix INA226 Sensor Voltage Readings (#5972) ... They were off by a factor of 1000 due to the difference between Volts and MilliVolts, as reported by @morcant . Fixes https://github.com/meshtastic/firmware/issues/5969	2025-02-03 08:39:42 -06:00
GUVWAF	d740934278	Don't rate-limit position requests for Lost and Found role (#5981)	2025-02-03 19:24:47 +08:00
Woutvstk	b370717dcd	Add bearing to other node on device screen in text (#5968) ... * Merge branch 'store-and-forward' of https://github.com/Woutvstk/meshtastic_firmware into store-and-forward * also show bearing to a waypoint in text on screen	2025-02-03 13:43:32 +08:00
Chloe Bethel	d9534cfc9d	Remove unused usages of #include <iostream> to save Flash (#5978) ... Saves ~100KB on wio-e5, which was previously at 99% Flash usage	2025-02-03 11:31:54 +08:00
Austin	4c0e0b8471	Portduino: Set Web SSL Cert / Key paths from yaml (#5961)	2025-02-01 16:58:58 +08:00
Jason P	cd8592ef4a	Fixes #5766 Updated MQTT privateCidrRanges to add Tailscale (#5957)	2025-01-29 06:14:43 -06:00
Austin	78da8f6fc4	Portduino: Allow limiting TX Power from yaml (#5954)	2025-01-29 12:51:26 +01:00
Tom Fifield	6a12760c3d	Fix off-by-one error with log writes (#5959) ... As reported by @jstockdale, when writing coloured logs we were writing the full string, including a null terminator. This caused issues for programs consuming our logs. The fix as identified is not to write the null. Fixes https://github.com/meshtastic/firmware/issues/5945	2025-01-28 19:57:52 -06:00
Thomas Göttgens	30a31a3a13	Oem logo (#5939) ... * reinstate oemlogo, add to userPrefs.jsonc * disable from default build	2025-01-28 08:38:22 -06:00
Manuel	2d42e1b2bc	fix: TCXO_OPTIONAL featuring SenseCAP Indicator (V1/V2) (#5948) ... * fix TCXO_OPTIONAL * fix LOG_WARN * fix lora.begin() returns -707 * trunk fmt	2025-01-27 14:00:12 -06:00
GUVWAF	4747e73f37	Space out periodic broadcasts of modules automatically (#5931) ... * Space out periodic broadcasts of modules automatically * Add warning for function usage --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-01-26 13:59:59 -06:00
Ben Meadors	7649e70585	Revert "No focus on new messages if auto-carousel is off (#5881)" (#5936) ... This reverts commit 0f981153eb.	2025-01-25 12:01:25 -06:00
GUVWAF	a14346bc4f	Rate limit position replies to three minutes (#5932)	2025-01-25 09:24:24 -06:00
github-actions[bot]	4c97351187	[create-pull-request] automated change (#5926) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-01-24 18:52:17 -06:00
Tom Fifield	3298df953a	Fixed the issue that the wifi configuration saved to RAM did not take effect. (#5925) ... Co-authored-by: virgil <virgil.wang.cj@gmail.com>	2025-01-24 07:30:18 -06:00
Ben Meadors	0d860882a8	NRF52 - Remove file totally before opening write (#5916) ... * Remove prefs first * Remove file first * Remove truncate * No longer needed * Missed a param * That wasn't supposed to be there * Remove vestigal lfs assert * Durr	2025-01-23 19:12:20 -06:00
GUVWAF	f87c370123	Fix possible memory leak for ROUTER_LATE (#5901)	2025-01-21 18:11:37 +01:00
Eric Severance	c4fcbad372	Reboot before formatting LittleFS (#5900) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-01-20 11:43:35 -06:00
isseysandei	0f981153eb	No focus on new messages if auto-carousel is off (#5881) ... * no focus on messages if screen carousel is disabled * trunk + comment * compacted the nested if using ternary operator * trunk	2025-01-20 10:47:47 -06:00
Thomas Göttgens	973b453d43	Update RAK2560 code (#5844) ... * * Update RAK9154 sensor to tx remote power telemetry * remove uf2 script, pio run does that inline * move sensor module to correct position * disable LED and Accelerometer code on rak2560 * trunk fmt * mention epaper variant * attention, revert, revert * Enable Environment Telemetry of these values * fix float values	2025-01-20 09:34:54 +01:00
Ben Meadors	950341d1f9	Alert app messages should be treated as text (#5878)	2025-01-18 08:15:06 -06:00
Thomas Göttgens	b353bcc04a	fix detection of lark weather station and add rain sensor (#5874) ... * fix detection of lark weather station * fix unit tests and add support for Dfrobot rain gauge * fix name display on bootup * fix gauge init logic * trunk fmt	2025-01-18 14:10:13 +01:00
github-actions[bot]	c4051c1a7b	[create-pull-request] automated change (#5877) ... Co-authored-by: caveman99 <25002+caveman99@users.noreply.github.com>	2025-01-18 13:32:09 +01:00
Patrick Siegl	e466bf2475	Slight rework of CH341 HAL (#5848) ... * Rework of CH341 HAL * Applied trunk fmt * revert serial reading --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>	2025-01-16 19:38:58 -06:00
Eric Severance	b0fe5ef8ba	Initial commit of a fuzzer for Meshtastic (#5790) ... * Initial commit of a fuzzer for Meshtastic. * Use a max of 5 for the phone queues * Only write files to the temp dir * Limitless queue + fuzzer = lots of ram :) * Use $PIO_ENV for path to program * spelling: s/is/to/ * Use loopCanSleep instead of a lock in Router * realHardware allows full use of a CPU core * Ignore checkov CKV_DOCKER_2 & CKV_DOCKER_3 * Add Atak seed * Fix lint issues in build.sh * Use exception to exit from portduino_main * Separate build & source files into $WORK & $SRC * Use an ephemeral port for the API server * Include CXXFLAGS in the link step * Read all shared libraries * Use a separate work directory for each sanitizer --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-01-16 18:42:21 -06:00
Vít Holásek	f132158c3e	Fixed localization on bigger screens (#5695) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-01-16 18:39:39 -06:00
danwelch3	a085614aaa	Initiate magnetometer based compass calibration from button presses (#5553) ... * Initiate magenetometer based compass calibration from button presses - only active for BMX160 accelerometers on RAK_4631 - replace automatic calibration on power on with button triggered calibration - set 5 presses to trigger 30s calibration - set 6 presses to trigger 60s calibration (useful if unit is not handheld, ie vehicle mounted) - show calibration time remaining on calibration alert screen * Fix non RAK 4631 builds - exclude changes from non RAK 4631 builds - remove calls to screen when not present * Fix build on RAK4631_eth_gw - exclude all compass heading updates on variant without screen --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-01-16 17:22:27 -06:00
Ben Meadors	7acd72ede1	Cleanup unique id	2025-01-16 16:00:23 -06:00
todd-herbert	a48df91737	Canned messages: allow GPIO0 with "scan and select" input (#5838) ... * Allow GPIO0; check for conflict with user button * Guard for no BUTTON_PIN; handle portduino * Portduino settings: attempt two We don't really need to #include radio code here just to check if the pin is RADIOLIB_NC. We're only interested if scanAndSelect pin matches user button pin, but they won't match if user button is RADIOLIB_NC. * Portduino attempt 3: glue	2025-01-16 06:38:22 -06:00
todd-herbert	4cd2ba5479	More lines of environmental telemetry on-screen (#5853)	2025-01-16 23:23:57 +13:00
todd-herbert	f9876cfe9c	Wait for disconnection (#5859)	2025-01-15 07:19:51 -06:00
Ben Meadors	85de193845	Fix NRF52 default append write mode of files (#5858) ... * Fix NRF52 default append write mode of files * Inside the lock	2025-01-15 06:46:12 -06:00
isseysandei	038430db23	Environmental sensors page scrolling (#5847) ... * env scrolling first iteration * ran trunk	2025-01-14 09:00:00 +08:00
Ben Meadors	e2dd845051	Fix devicestate protobuf / filesize allocation (#5835)	2025-01-13 08:30:20 -06:00
Ben Meadors	1c0f43c8e2	NRF52 SafeFile should not remove / rename files (#5840)	2025-01-13 06:28:18 -06:00
isseysandei	89a9e0b99d	Added illuminance sensors to the node's environmental sensor page (#5832) ... * illuminance sensors added * added white_lux to debug	2025-01-13 16:39:01 +08:00
Jonathan Bennett	6b1c01ce02	Trunk n stuff (#5833) ... * Trunk * Allow new gpio syntax with defaults * Exit on pin init failure	2025-01-12 15:10:50 -06:00
Patrick Siegl	70296b47bc	Multi gpiochip support for native environment (#5743) ... * For each GPIO PIN, allow to specify gpiochip and line * Added support for LLCC68 in native env. * Removed one if by employing && * Fix for log, as std::string and not const char* * Remove CH341 flag, enabling it for all LoRa chips * Provide a default example --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>	2025-01-12 13:40:25 -06:00
Erayd	0cf4a2951a	Bugfix for low-priority packet replacement when TX queue is full (#5827) ... * Correct function comment * Enqueue the intended packet, not the pointer to what we just dropped! * Add some log output when we drop packets due to a full queue * Make it clear when a non-late packet is dropped * Remove from queue before release, not after * Erase dropped packet from queue * Declared type * Log TX queue length after every send * Fix operand order * Add worst-case cap on TX delay vs current time	2025-01-12 12:05:51 -06:00
Eric Severance	124936b6cf	Avoid a potential NULL pointer reference in nrf52/BluetoothPhoneAPI (#5830)	2025-01-12 12:05:04 -06:00
And137	a0a4c5bc79	Support for Polish fonts on E-Ink devices, Polish fonts retouch, fixed Czech/Slovak OLED/E-Ink double space bug (#5821) ... * Added support for Polish fonts for E-Ink devices * Added support for Polish fonts for E-Ink devices FIX * Polilsh E-Ink/OLED font retouch, fixed Czech/Slovak font double space bug * Fixed platformio.ini uncommented flag	2025-01-12 14:30:58 +08:00
GUVWAF	6b8cf164e9	Save some flash usage on STM32WL (#5819)	2025-01-11 07:20:32 -06:00
GUVWAF	812aa35f09	Enable Tx interrupt immediately after startTransmit() (#5820)	2025-01-11 07:19:17 -06:00
Eric Severance	e7802d960f	Manage when destructor is called for native HttpAPI (#5807)	2025-01-11 06:15:50 -06:00
Ben Meadors	f18a92e8c5	Don't check for node channels on broadcast address (#5804)	2025-01-10 18:46:26 +08:00
Bernd Giesecke	2e44de262e	Add GPS capability to RAK2560 (RAKwireless WisMesh Hub) (#5797) ... * Add GPS to RAK2560 * Add GPS to RAK2560	2025-01-09 19:20:38 -06:00
Eric Severance	1d756ae574	Fix potential memory leak in AtakPluginModule (#5803)	2025-01-10 08:25:25 +08:00
Mictronics	9421eba027	Fix build for Pico2 RP2350 platform. (#5783) ... * Fix LED pinout for T-Echo board marked v1.0, date 2021-6-28 * Merge PR #420 * Fixed double and missing Default class. * Use correct format specifier and fixed typo. * Removed duplicate code. * Fix error: #if with no expression * Fix warning: extra tokens at end of #endif directive. * Fix antenna switching logic. Complementary-pin control logic is required on the rp2040-lora board. * Fix deprecated macros. * Set RP2040 in dormant mode when deep sleep is triggered. * Fix array out of bounds read. * Admin key count needs to be set otherwise the key will be zero loaded after reset. * Don't reset the admin key size when loading defaults. Preserve an existing key in config if possible. * Remove log spam when reading INA voltage sensor. * Remove static declaration for admin keys from userPrefs.h. Load hard coded admin keys in case config file has empty slots. * Removed newlines from log. * Fix issue #5665. * Fix build for Pico2 RP2350 platform. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>	2025-01-07 09:57:42 -06:00
Eric Severance	27fbfd03d6	Add unit tests for MQTT (#5724) ... * Add unit tests for MQTT * Test received fields	2025-01-07 07:10:42 -06:00
Marco Veneziano	353740623f	Increase esp32c3 stability over wifi (#5774) ... * Increase esp32c3 stability over wifi * only apply the fix on esp32c3 based nodes	2025-01-07 07:09:51 -06:00
isseysandei	70076a4b27	Improved Power Telemetry page readability even more (#5770) ... * increased buffer size to 1024 * better readability * better readability 2 --------- Co-authored-by: BuildTools <unconfigured@null.spigotmc.org>	2025-01-06 09:14:52 -06:00
isseysandei	c003ab0eee	Improved readability of Power Telemetry page (#5746) ... * increased buffer size to 1024 * better readability	2025-01-05 18:58:10 -06:00
Ben Meadors	4fcf7fe027	Revert "Explicitly set CAD symbols, improve slot time calculation and adjust …" (#5765) ... This reverts commit 9cc79b1d1e.	2025-01-05 18:55:55 -06:00
GUVWAF	9cc79b1d1e	Explicitly set CAD symbols, improve slot time calculation and adjust CW size accordingly (#5749) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-01-05 18:55:20 -06:00