geeksville
871a85d688
force all devices to discard old settings
2020-06-07 17:22:07 -07:00
geeksville
e124d2094f
PROTOCOL CHANGE! activate 32 bit nodenums/packetids
2020-06-06 13:16:36 -07:00
geeksville
9ea65c6793
Fix #153 - details below
...
Somehow nodenum was getting reset to zero (and saved to flash - which is
bad because it makes the failure permanent). So I've changed nodenum
selection to occur after we load the saved preferences (and we try to keep
nodenum stable in that case).
I'm puzzled as to how it ever got set to zero (unless there *shudder*
is some errant pointer that clobbered it). But next week I'm turning
4 byte nodenums back on, which will make this moot - because they
will always be based on macaddr and the current process where nodes
haggle with the mesh to pick a unique one-byte nodenum will be gone.
2020-06-06 08:30:01 -07:00
geeksville
8d14e97dfa
oops - we were not saving radio state
2020-06-06 08:07:21 -07:00
geeksville
99437d931e
fix #153
2020-06-03 16:08:11 -07:00
geeksville
49b5738f4f
add min_app_version so apps can warn if they are too old
2020-06-03 13:57:30 -07:00
geeksville
c753ea7cd1
don't use a fixed randomSeed.
2020-06-03 13:51:53 -07:00
geeksville
5b1488ddf0
Allow packet and nodenums to be 32 bits long (but don't change yet)
2020-06-03 13:46:31 -07:00
geeksville
a34cfb0ee0
Populate metainfo for apps to allow 32 bit node and packet ids
2020-06-03 13:15:45 -07:00
geeksville
e522e47544
Full DSR WIP
2020-06-03 12:49:36 -07:00
geeksville
ed0f79b683
Merge branch 'master' into nrf52
2020-05-27 15:54:44 -07:00
geeksville
1b34a0c6d8
Help make sx1262 go for @dafeman 's board. See below for details:
...
Hi, I think the problem you were having building for ESP32 was due to
a funny thing. Notice the #define for INTERRUPT_ATTR. That macro expands
to IRAM_ATTR - which is a special flag the ESP32 requires for _any_ code
that is going to be called from an ISR. So that the code is guaranteed
to be in RAM (the ESP32 uses a clever scheme where the FLASH is actually
high speed serial flash and all reads/writes are actually only happening
to a small number of pages in RAM and they have a driver that is constantly
copying blocks they need into that ram. This essentially how VM works
for desktop computers, but in their case they are paging to FLASH.
But for code that runs in an interrupt handler must _always_ be in RAM
because if you took a 'page fault' for that code being missing in RAM they
can't nicely do their clever VM scheme.
So that's all good. The problem was - apparently GCC for the ESP32 has a
a bug when that attribute is applied in the class declaration. So
I moved it out into the cpp file and all seems well now.
2020-05-27 15:47:59 -07:00
geeksville
f56ff2ca20
DSR WIP
2020-05-27 15:31:32 -07:00
geeksville
f4b1678535
my DSR changes broke acks for flood routing also. Fix #146
2020-05-25 11:55:42 -07:00
geeksville
d39e775c95
make flash filesystem work on NRF52
2020-05-25 10:07:42 -07:00
geeksville
829e0b6e26
fix extra free
2020-05-25 08:19:14 -07:00
geeksville
1656c8d0cb
use my Timer class on all platforms, it works better than the freertos version
2020-05-25 07:48:36 -07:00
geeksville
2770cc7de3
Use the SX1262 receive duty cycle mode to get radio current draw down to
...
about 2.5mA @ 3V while in receive mode.
2020-05-24 19:23:50 -07:00
geeksville
48de631e04
disable activelyReceiving for sx1262 for now - it doesn't yet work
2020-05-24 16:34:18 -07:00
geeksville
e8f6504ec4
Make an accelerated NRF52 implementation for AEX256-CTR crypto
2020-05-24 14:45:50 -07:00
geeksville
8f1b26bdda
DSR wip still kinda busted (rx packets not working - even for regular router)
2020-05-24 12:59:10 -07:00
geeksville
5bd3e4bcd0
DSR WIP
2020-05-23 17:39:08 -07:00
geeksville
fb3b62f8f0
CSR WIP
2020-05-23 15:48:23 -07:00
geeksville
e89fe2f7d9
DSR WIP
2020-05-23 12:50:33 -07:00
geeksville
16812c3ee4
add ignore_incoming to user preferences, for automated testing of DSR topologies
2020-05-23 10:01:36 -07:00
geeksville
c9cb293bf2
cleanup virtual inheritence for Router/Reliable/Flooding/DSR
2020-05-23 09:24:22 -07:00
geeksville
8e2e154cdd
Merge remote-tracking branch 'root/master' into nrf52
2020-05-22 19:06:35 -07:00
geeksville
dd0209b192
Merge remote-tracking branch 'root/master' into nrf52
...
# Conflicts:
# docs/software/nrf52-TODO.md
# src/mesh/RadioLibInterface.cpp
# src/mesh/mesh.pb.h
2020-05-22 11:12:22 -07:00
geeksville
2dadb4d7a2
make nrf52dk build again
2020-05-21 20:31:22 -07:00
geeksville
d2de04d5b2
Fix #59 no need for broadcasts when showing new node pane
2020-05-21 17:21:44 -07:00
geeksville
9dd88281af
reliable broadcast now works
2020-05-21 16:34:16 -07:00
geeksville
e75561016b
retransmissions work again
2020-05-21 15:55:57 -07:00
geeksville
e2cbccb133
add want_ack support for broadcast packets
2020-05-21 12:47:41 -07:00
geeksville
0271df0657
add beginnings of full DSR routing
2020-05-21 12:47:08 -07:00
geeksville
71041e8674
reliable unicast 1 hop works!
2020-05-19 15:51:07 -07:00
geeksville
6ba960ce47
one hop reliable ready for testing
2020-05-19 14:54:47 -07:00
geeksville
8bf4919576
wip reliable unicast (1 hop)
2020-05-19 11:56:17 -07:00
geeksville
cca4867987
want_ack flag added
2020-05-19 10:27:28 -07:00
geeksville
976bdad067
sniffReceived now allows router to inspect packets not destined for this node
2020-05-18 17:57:58 -07:00
geeksville
26d3ef529e
Use the hop_limit field of MeshPacket to limit max delivery depth in
...
the mesh.
2020-05-18 17:35:23 -07:00
geeksville
14fdd33972
move bluetooth OTA back into main tree for now
2020-05-14 14:20:05 -07:00
geeksville
a0b43b9a95
Send "unset" for hwver and swver if they were unset
2020-05-12 17:57:51 -07:00
geeksville
b6a202d68e
runs again with new protobufs
2020-05-12 13:35:22 -07:00
geeksville
9f05ad2927
remove random delay hack from broadcast, since we now do that for all transmits
2020-05-11 16:19:44 -07:00
geeksville
86ae69d360
refactor so I can track and ignore recent packets of any type
2020-05-11 16:14:53 -07:00
geeksville
c12fb69ca2
update protos
2020-05-10 14:17:05 -07:00
geeksville
2fa595523f
minor fixups to get nrf52 building again
2020-05-09 21:02:56 -07:00
geeksville
3e356e5866
Crypto works!
2020-05-09 19:08:04 -07:00
geeksville
1cc24de787
stub encryptor seems nicely backwards compatible with old devices and apps
2020-05-09 17:51:20 -07:00
geeksville
e6875d559c
Remove MeshRadio wrapper class - we don't need it anymore.
2020-05-09 16:32:26 -07:00
geeksville
28d21ecdcc
begin work on crypto
2020-05-09 16:15:01 -07:00
geeksville
8bfe9fa8fc
0.6.3 - fix the problem of BLE message receiption being busted in 0.6.2
2020-05-05 18:40:17 -07:00
geeksville
101eef5495
oops lat/lon need to be signed ;-)
2020-05-04 11:21:24 -07:00
geeksville
933d5424da
abstract out the UBlox GPS driver
2020-05-04 11:15:05 -07:00
geeksville
9b309fe0a0
Use int based lat/long from now on in the device code
...
for https://github.com/meshtastic/Meshtastic-device/issues/124
2020-05-04 08:09:08 -07:00
geeksville
1d9290afc0
now that the rfinterfaces are smarter, no need to do backoff in
...
the flood router. the interfaces will handle it.
2020-05-02 19:53:58 -07:00
geeksville
ad2f639195
don't leak messages if they are handled locally
2020-05-02 19:53:13 -07:00
geeksville
07b4eea037
fix log msg
2020-05-02 19:52:54 -07:00
geeksville
79c61cf0e0
limit max power on rf95 to 17 (rather than 20, because 20 can...
...
burn up parts if you exceed 1% duty cycle)
2020-05-02 19:52:37 -07:00
geeksville
80268ea56a
send() is supposed to always free buffers, even if it returns an error
2020-05-02 19:51:55 -07:00
geeksville
bb9f595b8b
Fix #11
2020-05-02 19:51:25 -07:00
geeksville
2ad314f150
we now always listen before transmit - even if we have just completed a packet
2020-05-02 08:29:51 -07:00
geeksville
e084699704
SNR is now a float, fix the screen display
2020-05-01 12:31:36 -07:00
geeksville
50213d8323
move packet handling into its own thread
2020-05-01 12:11:04 -07:00
geeksville
71fcdba017
cleanup directory structure
2020-05-01 09:04:00 -07:00
geeksville
5a4fab2506
start msg sequence numbers with a random number each boot
2020-05-01 08:51:53 -07:00
geeksville
82c1752d85
less logspam
2020-05-01 08:31:52 -07:00
geeksville
0096f54ae9
better debug output
2020-04-30 22:53:21 -07:00
geeksville
4e106f4098
remove radiohead
2020-04-30 21:42:11 -07:00
geeksville
dd7452ad96
old RF95 code builds again
2020-04-30 16:36:59 -07:00
geeksville
22720e9f63
ex1262 receiving kinda works
2020-04-30 12:37:58 -07:00
geeksville
f69ddf168b
we now hopefully apply the same radio settings as we did for the RF95
2020-04-29 18:46:32 -07:00
geeksville
814c126e67
ugly WIP on switching to RadioLib, still need to set freq etc...
2020-04-29 14:54:03 -07:00
geeksville
2ab34357d5
emit FromRadio.rebooted to serial test harness can detect reboots
2020-04-28 17:43:16 -07:00
geeksville
b704911603
minor protobuf update
2020-04-28 11:20:00 -07:00
geeksville
59086fd477
fixes after testing stream protocol with python client
2020-04-27 18:52:57 -07:00
geeksville
cceecf5f8e
New serial protobuf transport approximately works and is backward
...
compatiable with the text debug output.
2020-04-27 09:36:39 -07:00
geeksville
dda946d933
Stream API coded but not tested
2020-04-27 08:45:39 -07:00
geeksville
178e800969
add beginnings of StreamAPI
2020-04-27 08:10:17 -07:00
geeksville
dec4870649
begin cleaning up mesh library layer so that it could be split someday
2020-04-27 07:54:19 -07:00
