915 Commits

Author	SHA1	Message	Date
Nasimovy	273e480ebe	using the original touchscreen implementation	2025-06-22 14:12:52 +02:00
Nasimovy	b761dcb1a6	Merge branch 'meshtastic:master' into T-beam-display-no-touch	2025-06-15 19:51:28 +02:00
Andy Shinn	f1dd623ce9	allow overriding INA3221 channels (#7035) ... Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>	2025-06-15 07:39:49 -05:00
todd-herbert	425f384b1f	InkHUD DIY builds for ProMicro & Heltec T114 (#7039) ... * DIY InkHUD variants (ProMicro & T114) * Fix file encoding > We’ve detected the file encoding as ISO-8859-1. When you commit changes we will transcode it to UTF-8. * Update comment justifying trunk suppression	2025-06-15 09:39:46 +10:00
Ben Meadors	cc0fbfbd21	Fixed breaking of inkhud / tft suffix convention	2025-06-13 06:59:05 -05:00
Nasimovy	6d51e88ecb	Merge branch 'master' into T-beam-display-no-touch	2025-06-13 11:41:10 +02:00
Csrutil	5d0bf03b01	add support for GAT562 Mesh Trial Tracker (#6984) ... * add support for GAT562 Mesh Trial Tracker * Hardware Model Definition for GAT562_MESH_TRIAL_TRACKER * Added RAK4630 for led pin 2 (blue) * Added RAK4630 for led pin 2 (blue) comment * don't touch src/mesh/NodeDB.cpp * set fixed baudrate for gat562_mesh_trial_tracker * adjust the order of the HW_VENDOR defines --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net>	2025-06-13 17:27:48 +10:00
Tom Fifield	8557bd031d	Remove GPS Baudrate locking for Seeed Xiao NRF52840 Kit (#7016) ... The Seeed Xiao NRF52840 Kit's default GPS is an L76K which operates at 9600 baud, so when this variant was defined that baud rate was specified. However, this is a development board and it is expected that users can attach their own devices. This includes GPS, which may operate at a different baud rate. The current fixed baud rate prevents this, so this patch removes that setting. This will revert to the regular automatic probe method. This will sucessfully detect the L76K as before (probably the same as before since 9600 baud is the first baud rate checked), but also allow other GPSes at other baud rates to be detected. Fixes https://github.com/meshtastic/firmware/issues/7012 Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-06-12 19:56:40 -05:00
Ben Meadors	60ec05e536	elecrow-adv-35-tft	2025-06-11 10:54:08 -05:00
Ben Meadors	730cd388d6	Fix pio	2025-06-11 08:49:20 -05:00
Ben Meadors	6549b0477c	Missed a spot	2025-06-11 06:10:34 -05:00
Ben Meadors	8304cae010	Fix issue with CI not picking up elecrow panels due to confusing env	2025-06-11 06:09:25 -05:00
Andreas 'count' Kotes	c6c2a4d4dd	Improve support for Heltec Wireless Bridge (#6647) ... * Use BLE_LED where present for CONNECTED/DISCONNECTED * Use WIFI_LED where present for WiFi started/stopped (as AP) or connected/disconnected (as Station) * improve support for Heltec Wireless Bridge * satisfy 'trunk fmt'	2025-06-10 13:54:07 +10:00
Clément Hampaï	1eacdd0629	[Variant] nomadstar meteor pro (#6742) ... * Initial support for NomadStar Meteor Pro * Cleaned up Platformio variant comments * Removed RTC & ETH deps. * Removed RGB NCP5623 deps, Enabled AmbientLight by default * Added HWID mapping * Updated Armduino-Semihosting lib dep with archived version. * Fixed trunk linting in AmbientLightingThread.h and hydra variant	2025-06-10 07:48:52 +10:00
Manuel	7924ef87b5	enable custom driver (#6988) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-06-09 05:41:41 -05:00
Tom	15d2ae17f8	Add note to hydra to note that the button pin has no pull-up (#6979) ... Add note to hydra to note that the button pin has no pull-up. Use an external resistor or remove the `#define`.	2025-06-07 06:55:58 -05:00
Thomas Göttgens	28a29938bc	Merge branch 'master' into T-beam-display-no-touch	2025-06-05 14:37:28 +02:00
Andrew Yong	070deb290f	seeed_xiao_nrf52840_kit improvements (#6930) ... * feat: seeed_xiao_nrf52840_kit improvements - LEDs: - Change RGB LED to be active low as it is common anode - Remove re-definition of LED_PIN - Use red LED to indicate flash writes - Use blue LED as user LED (External Notification module) - GPIO: Re-word unused BUTTON_PIN comment - Wire: Set I2C pins to match XIAO nRF52840 Sense's LSM6DS3TR IMU - Battery: - Use charge LED to detect charging state - Move voltage divider boilerplate out of src/main.cpp and into initVariant() - Fix dependencies for above in related XIAO BLE DIY variants Build tested variants: - seeed_xiao_nrf52840_kit - xiao_ble - seeed-xiao-nrf52840-wio-sx1262 Flashed to and tested on hardware: - seeed_xiao_nrf52840_kit Signed-off-by: Andrew Yong <me@ndoo.sg> * chore(seeed_xiao_nrf52840_kit): Re-order generic GPIO definitions Signed-off-by: Andrew Yong <me@ndoo.sg> * chore: Use ADC_CTRL for XIAO nRF52840 Signed-off-by: Andrew Yong <me@ndoo.sg> --------- Signed-off-by: Andrew Yong <me@ndoo.sg>	2025-06-05 06:45:43 -05:00
Ben Meadors	7a7166d575	Revert "Add a new screen for heltec_wireless_paper. (#6894)" (#6918) ... This reverts commit ba53543354.	2025-05-29 10:17:20 -05:00
Quency-D	ba53543354	Add a new screen for heltec_wireless_paper. (#6894) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-29 09:10:25 -05:00
Ben Meadors	7849a3d291	Trunk	2025-05-29 06:35:18 -05:00
dylanli	c0c2ec195f	add support for seeed wio tracker L1 (#6907) ... * add support for seeed wio tracker l1 * add support in nrf52 arch * fix ADC problem and comments incorrect * fix gps wakeup pin * fix gps pin	2025-05-29 06:33:22 -05:00
Nasimovy	8d449e5016	Merge branch 'meshtastic:master' into T-beam-display-no-touch	2025-05-28 15:27:36 +02:00
Thomas Göttgens	96c18d9908	Add LINK32 (Lilygo) Board with Light+Environment sensors (#6899) ... * Add LINK32 (Lilygo) Board with Light+Environment sensors TODO: replace PRIVATE_HW with actual HWID * Add LINK32 (Lilygo) Board with Light+Environment sensors TODO: replace PRIVATE_HW with actual HWID * Update to real HWID and trunk fmt	2025-05-27 18:11:32 -05:00
Nasimovy	00a96f39d1	spi speed increase of the display	2025-05-26 06:55:19 +02:00
Nasimovy	ce8298c056	add SCREEN_TRANSITION_FRAMERATE 5	2025-05-26 06:48:18 +02:00
Nasimovy	0dcc6baffc	Merge remote-tracking branch 'origin/master' into T-beam-display-no-touch	2025-05-25 16:44:00 +02:00
Nasimovy	ef0fb49da3	display speed x10	2025-05-25 15:46:05 +02:00
Andrew Yong	e29588d2e2	feat(RadioInterface): Tx power gain calculation rework (#6796) ... - Rename REGULATORY_GAIN_LORA to TX_GAIN_LORA - Move gain-based Tx power clamping from RadioInterface::applyModemConfig() to RadioInterface::limitPower() - User-configured Tx power now matches the Tx power out of the device connector - Re-order [LoRa Chip]Interface.cpp limitPower() to take place before the final Tx power clamping so we clamp based on the pre-PA Tx power rather than user-configured Tx power Tested on XIAO BLE variant. Signed-off-by: Andrew Yong <me@ndoo.sg> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-25 06:26:31 -05:00
Thomas Göttgens	2d5f8a92f6	Typo ... Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-05-25 00:53:05 +02:00
Thomas Göttgens	5ef961dbdb	Correct spelling ... Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-05-25 00:52:50 +02:00
Nasimovy	c37fe24987	Merge branch 'meshtastic:master' into T-beam-display-no-touch	2025-05-23 19:50:03 +02:00
Nasimovy	7e8845fc15	removed baudrate of 115200 and some commented out code	2025-05-23 19:48:17 +02:00
dylanli	c01db98819	update seeed solar node led pin (#6871)	2025-05-23 08:04:17 -05:00
todd-herbert	ba1ef45024	InkHUD Extended ASCII (#6768) ... * Custom AdafruitGFX fonts with extended ASCII encodings * AppletFont handles re-encoding of UTF-8 text * Manual parsing of text which may contain non-ASCII chars * Display emoji reactions, even when unprintable Important to indicate to users that a message has been received, even if meaning is unclear. * Superstitious shrink_to_fit I don't think these help, but they're not hurting! * Use Windows-1252 fonts by default * Spelling * Tidy up nicheGraphics.h * Documentation * Fix inverted logic Slipped in during a last minute renaming while tidying up to push..	2025-05-22 18:16:53 -05:00
Nasimovy	f6dedcbc02	changed display library to meshtastic org	2025-05-22 21:01:35 +02:00
Nasimovy	c1bd6c4c34	Merge branch 'meshtastic:master' into T-beam-display-no-touch	2025-05-16 20:26:32 +02:00
rcarteraz	b1955c34aa	Update Seeed Solar Node (#6763) ... * Update Seeed Solar Node * Update Seeed Solar Node * updates * updates * updates --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-14 06:32:24 -05:00
Richard Zhang	d9ad2322e8	Fixes BUG #6243 Heltec Tracker (#6781) ... * fix wireless tracker screen issues * fix SHTC3 BUG * Remove the 32K crystal oscillator option for the Wireless Paper and Vision Master series. * Correct spelling errors * Update src/graphics/Screen.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-05-14 06:29:05 -05:00
Thomas Göttgens	9143540825	Merge branch 'master' into T-beam-display-no-touch	2025-05-13 21:36:22 +02:00
Thomas Göttgens	cc66f7c79b	Crowpanel 4.3, 5.0, 7.0 support (#6611) ... * SD software SPI control * fix notification crash; * allow wake on touch * don't build non-MUI variants * use pwm buzzer * Finalize support for Crowpanel TFT 2.4, 2.8 and 3.5 * add hardware ID for TFT panels * Add stubs for the bigger panels. WIP! * fix braces * elecrow 4.3, 5.0, 7.0 support * completed implementation 4.3, 5.0, 7.0 variants * NodeDB default config & simplified light sleep macros * trunk fmt * remove flags * removed leftovers (note: rtc gpios are only needed for deep sleep; the remove section caused issues with the elecrows) --------- Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> Co-authored-by: Austin <vidplace7@gmail.com>	2025-05-13 14:15:52 +02:00
Nasimovy	97c3673eba	Merge branch 'master' into T-beam-display-no-touch	2025-05-10 09:06:14 +02:00
Tom	ca9bf6b31a	Update XIAO_NRF_KIT RXEN Pin definition (#6717) ... The XIAO NRF kit comes with a hat which has a slightly different pinout than the one supplied with the XIAO S3. At the last update, the RXEN pin was not moved with the rest.	2025-05-07 21:20:15 -05:00
Nasimovy	8346ab4d86	Merge branch 'meshtastic:master' into T-beam-display-no-touch	2025-05-06 13:07:27 +02:00
Austin	2d6181fca0	update bosch bsec2 (#6727) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-05 06:03:36 -05:00
Manuel	a8ab6e82e6	MUI framebuffer support (#6703) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-30 20:50:30 -05:00
Nasimovy	00f623a488	Merge branch 'master' into T-beam-display-no-touch	2025-04-30 12:05:17 +02:00
Colin	72eae42b81	PMSA003I: add support for driving SET pin low while not actively taking a telemetry reading (#6569) ... * support manually shutting off power to the PMSA003I sensor when we aren't doing a telemetry reading * add comment about PMSA003I_WARMUP_MS to AirQualityTelemetry.cpp * fix typos, use arduino gpio defines instead of magic numbers * support manually shutting off power to the PMSA003I sensor when we aren't doing a telemetry reading * add comment about PMSA003I_WARMUP_MS to AirQualityTelemetry.cpp * fix typos, use arduino gpio defines instead of magic numbers * RAK4631: add PMSA003I_ENABLE_PIN define * fix indentation --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-29 06:31:01 -05:00
Nasimovy	680ea1c340	Merge branch 'meshtastic:master' into T-beam-display-no-touch	2025-04-27 13:04:18 +02:00
todd-herbert	89df9d7686	Fix WiPhone variant.h (#6664)	2025-04-24 20:40:48 -05:00