geeksville
6cdaf8c600
fix #349 channel suffix letter didn't match between device and phone
2020-08-30 12:38:15 -07:00
geeksville
c370eb4a88
allow restarting failed upgrades (fixes an android autobug report)
2020-08-30 12:21:05 -07:00
geeksville
8dc4492ba3
add taiwan frequencies
2020-08-30 12:20:43 -07:00
geeksville
901cc536ef
less logspam
2020-08-29 15:17:32 -07:00
geeksville
dffb6c2f06
If display is on on the @BigCorvus board and we xmit the board browns out?
2020-08-28 17:38:23 -07:00
geeksville
7f214ffbb0
TFT kinda correct now - but slow because of bit banging
2020-08-28 15:33:33 -07:00
geeksville
e049eac38a
TFT display kinda draws stuff (badly)
2020-08-28 15:06:52 -07:00
geeksville
338445d175
basic init of the Corvus TFT display works
2020-08-28 14:24:22 -07:00
geeksville
79498580b1
If LORA32 battery voltage is super low, assume no battery installed
2020-08-27 14:46:59 -07:00
geeksville
af046e7dbd
bug #322 - ttgo lora32 deep sleep
...
oh - I think I found the problem (probably)! we were isolating gpio12 (which isn't used on other boards) to save power during sleep. gpio12 is the button for this board. @thomslik would you mind pulling this commit and seeing if it works better?
2020-08-26 14:00:10 -07:00
geeksville
5c40378805
fix #336 don't send battery status on nodes without batteries
2020-08-25 13:00:55 -07:00
geeksville
780b7e3628
don't show battery status on boards that can't sense that #336
2020-08-25 12:48:47 -07:00
geeksville
f62e6793c5
Fix #333 screens were redrawing when they should not
...
thanks @drewsed for the clear report - made it easy to repro/fix
due to refactoring/cleanup a couple of weeks back
2020-08-25 12:08:18 -07:00
geeksville
de196810a2
add debugging for SNR values on SX1262
2020-08-25 12:06:36 -07:00
geeksville
7b09fbe049
fix #327 side effect noticed by @smarti2019
2020-08-22 09:06:54 -07:00
geeksville
a90bab5455
this seems bad - this value was not inited if it wasn't in bss
2020-08-21 10:56:54 -07:00
geeksville
ff885ef215
Merge remote-tracking branch 'root/post1'
2020-08-21 10:50:49 -07:00
geeksville
d7a1cef046
fix #327 always factory reset the GPS once
2020-08-21 10:14:03 -07:00
geeksville
ca75dcd64d
Add support for SX1262 based TBEAMs, see below for more details.
...
We probe dynamically for the SX1262 or RF95 based radios on TBEAM1.0
boards now. If either is present it will be used.
2020-08-20 15:42:36 -07:00
geeksville
9c9347df23
don't reference tft libs on devices that don't have it
2020-08-17 14:06:31 -07:00
geeksville
d91ab5480f
begin support for TFT displays
2020-08-17 13:47:05 -07:00
geeksville
3c09c3e520
show NRF52840 debug output via the USB CDC-ACM device
2020-08-17 11:50:50 -07:00
geeksville
781077e799
Turn on buck converter for @BigCorvus board, now radio works
2020-08-17 11:42:19 -07:00
geeksville
1c3eff0ee5
turn on fix #279 for tbeam0.7 and ttgo lora32-1.6 battery levels
2020-08-13 19:55:57 -07:00
geeksville
3de1607cea
bug #279 change battery voltage to millivolts
2020-08-13 11:23:27 -07:00
geeksville
6a402b13fa
Add battery sensing (mostly) for TBEAM0.7
...
However, disabled until someone with suitable hardware can test and report
back.
@slavino and @tschundler would you be willing to try it with your boards?
You'll need to uncomment the following line in configuration.h
// #define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
2020-08-12 17:03:36 -07:00
geeksville
9b25818a50
fix #249 : report battery levels even if no GPS lock
...
@professr I noticed you added a "newStatus" observable to the GPS class.
Do you remember why you didn't remove the old GPS status (which seemed
to be dumber). Is it just because you didn't want to risk breaking
MeshService? (I assume) In this change I removed the old Observable
and all seems well (just using newStatus everywhere).
2020-08-12 15:51:57 -07:00
geeksville
55dafcbecb
fix #269 see below
...
/**
* Generate a short suffix used to disambiguate channels that might have the same "name" entered by the human but different PSKs.
* The ideas is that the PSK changing should be visible to the user so that they see they probably messed up and that's why they
their nodes
* aren't talking to each other.
*
* This string is of the form "#name-XY".
*
* Where X is a letter from A to Z (base26), and formed by xoring all the bytes of the PSK together.
* Y is not yet used but should eventually indicate 'speed/range' of the link
*
* This function will also need to be implemented in GUI apps that talk to the radio.
*
* https://github.com/meshtastic/Meshtastic-device/issues/269
*/
const char *getChannelName();
2020-08-12 11:04:03 -07:00
geeksville
178958c165
allow advanced users to specify channel numbers if they wish
2020-08-12 10:46:44 -07:00
geeksville
d7cf7e2eb4
Allow advanced users to set arbitrary spreadfactor/codingrate/bandwidth
2020-08-12 10:42:25 -07:00
Kevin Hester
a7da7cd32e
Merge branch 'post1' into post1
2020-08-10 09:15:49 -07:00
geeksville
047141eb34
make TXEN/RXEN immediately low once changed to be outputs
2020-08-03 11:29:26 -07:00
geeksville
12bf3795ea
less logspam when debugging the serial API
2020-08-02 12:55:22 -07:00
Ellie Hussey
7f45184d90
Fixed message text wrapping, compass rose position, and added device ID on status page ( #300 )
2020-08-01 10:50:06 -07:00
geeksville
d5c46dc114
use max mtusize for speed
2020-07-24 12:39:48 -07:00
geeksville
204f2c1a68
software update service now registered with NimBLE
2020-07-24 11:39:48 -07:00
geeksville
a5b7501a4e
nimble add debug output
2020-07-24 10:12:25 -07:00
geeksville
b0e2c81666
nimble software update WIP builds
2020-07-23 15:57:31 -07:00
geeksville
00ca351169
WIP begin changing software update service over to nimble
2020-07-23 13:01:31 -07:00
geeksville
0415a3c369
Clean up nimble files
2020-07-23 08:10:36 -07:00
geeksville
4eb27b637d
Nimble sleep now works nicely
2020-07-22 22:18:47 -07:00
geeksville
107b56a346
move bluetooth enable
2020-07-22 21:41:56 -07:00
geeksville
abdc4dfae8
remove old mesh ble service
2020-07-22 21:29:32 -07:00
geeksville
014eea2f56
Nimble sleep almost works
2020-07-22 21:26:32 -07:00
geeksville
9b4ca95660
nimble basically works now. Started long bake for bug #266
2020-07-22 18:00:56 -07:00
geeksville
78ff9a8116
Nimble WIP - make notify work
2020-07-22 16:40:00 -07:00
geeksville
66b147fb31
Nimble WIP fix bluetooth pairing screen
2020-07-22 16:16:28 -07:00
geeksville
c5df1bc885
Nimble WIP - woot! basic device API works now
2020-07-22 15:44:45 -07:00
geeksville
00cf3a768e
nimble WIP turn on bonding and security
2020-07-22 13:50:30 -07:00
geeksville
b6a3deb341
nimble WIP - writes kinda work now
2020-07-22 12:08:54 -07:00
