* UDP for RAK4631 Eth Gw and the t-eth-elite. Also enable IP output on Portduino. Solves #7149
* Copilot suggestion
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* fix portduino build
* initialize local port
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* add new platform rak_wismeshtag
* Remove RTC and Ethernet definitions from variant.h
* Remove unused EINK and Ethernet definitions from variant.h and platformio.ini
* Add WISMESH_TAG hardware model definition in architecture.h and update build flags in platformio.ini
* Remove unused build flags and dependencies
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: daniel <daniel.cao@rakwireless.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
* Enable GPS for Wio-E5 variant on Serial2
* Add ability to override GPS serial port using GPS_SERIAL_PORT, and make RAK2560 use it.
* Don't try to send ATAK packets if ATAK is disabled, +4k flash
* docs(xiao_ble): Simplify building and flashing instructions
- **Update Bootloader** - deleted this section, as Meshtastic now builds-in a compatible SoftDevice
- **PlatformIO Environment Preparation** - deleted this section, as Meshtastic now builds-in a compatible SoftDevice
- **Build Meshtastic** - simplified it greatly by referring to Meshtastic documentation
- **Flash the firmware to the Xiao BLE** - simplified it greatly as Meshtastic now builds firmware.uf2; added some observations for a succesful flash
Light cleanup of Markdown and renumbering of sections.
Signed-off-by: Andrew Yong <me@ndoo.sg>
* docs(xiao_ble): Replace some HTML with Markdown, cleanup Markdown
Signed-off-by: Andrew Yong <me@ndoo.sg>
* docs(xiao_ble): Update SX126X_TXEN definition location
Signed-off-by: Andrew Yong <me@ndoo.sg>
* docs(xiao_ble): Fresher information about E22 modules
Signed-off-by: Andrew Yong <me@ndoo.sg>
* docs(xiao_ble): Instructions for E22...M33S modules
Also re-order the Build section to come after the Wiring section since the build instructions require special attention if the wiring/modules differ from the variant's expected pins/module.
Signed-off-by: Andrew Yong <me@ndoo.sg>
* docs(xiao_ble): Rename all XIAO BLE to XIAO nRF52840
Signed-off-by: Andrew Yong <me@ndoo.sg>
* docs(xiao_ble): Remove note about Linux since shell script is gone
Signed-off-by: Andrew Yong <me@ndoo.sg>
* docs(xiao_ble): trunk fmt and fix links
Signed-off-by: Andrew Yong <me@ndoo.sg>
---------
Signed-off-by: Andrew Yong <me@ndoo.sg>
These DIY builds are functionally similar to the legacy xiao_ble variant, but use a pinout harmonized with the officially-supported XIAO nRF52840 & Wio-SX1262 Kit for Meshtastic (SKU 102010710).
An additional E22-900M33S variant is provided to ensure SX1262 transmit power is set below the maximum PA input for that module, to avoid damaging it.
- seeed_xiao_nrf52840_e22_900m30s:
- XIAO nRF52840 + EBYTE E22-900M30S
- EBYTE E22 pinout matching Wio-SX1262 (SKU 113010003)
- I2C
- SDA: D6
- SCL: D7
- User button: D0
- Gain is programmed in firmware - user Tx power setting is the desired final output power
- seeed_xiao_nrf52840_e22_900m33s:
- XIAO nRF52840 + EBYTE E22-900M33S
- EBYTE E22 pinout matching Wio-SX1262 (SKU 113010003)
- I2C
- SDA: D6
- SCL: D7
- User button: D0
- Gain is programmed in firmware - user Tx power setting is the desired final output power
Signed-off-by: Andrew Yong <me@ndoo.sg>
The link to the product should point to the vendor's website, not a random distributor.
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Tests to identify display model
* (InkHUD) SSD1682 controller IC
Has a few quirks, gets its own base class
* (InkHUD) E0213A367 Display
For Heltec Wireless Paper V1.1.1, V1.2
For Heltec VM-E213 V1.1
* (InkHUD) Select display model at boot
* (BaseUI) Wrapper to combine multiple GxEPD2 drivers
Workaround for issue of GxEPD2_BW objects not having a shared base class. Allows us to select a driver at runtime.
https://github.com/meshtastic/firmware/issues/6851#issuecomment-2905353447
* (BaseUI) Select E-Ink model at boot
* (InkHUD) SSD1682 deep sleep
* (InkHUD) No deep sleep for SSD1682
* (InkHUD) Fully no-op deep sleep for SSD1682
* Initial work on splitting notification renderer into components for reuse
* More progress
* Fix notification popup
* more fix, less crash
* Adjustments for OLED on keeping menus tidy, added Bluetooth Toggle to Home frame. Also widen the frame slightly if you have a scroll bar
* Small changes for EInk to not crowd elements
* Change System frame menu over to better match actions; added color picker for T114
* Fix build errors and add T190 for testing
* Logic gates are hard sometimes
* Screen Color Picker changes, defined Yellow as a Color.
* Additional colors and tuning
* Abandon std::sort in NodeDB, and associated fixes (#7175)
* Generate short name for nodes that don't have user yet
* Add reboot menu
* Sort fixes
* noop sort option to avoid infinite loop
* Refactor Overlay Banner
* Continuing work on Color Picker
* Add BaseUI menus to add and remove Favorited Nodes
* Create TFT_MESH_OVERRIDE for variants.h and defined colors
* Trigger a NodeStatus update at the end of setup() to get fresh data on display at boot.
* T114 defaults to White, Yellow is now bright Yellow
* Revert "T114 defaults to White, Yellow is now bright Yellow"
This reverts commit 8d05e17f11.
* Only show OEM text if not OLED
* Adjust OEM logo to maximize visible area
* Start plumbing in Color Picker changes
* Finished plumbing
* Fix warning
* Revert "Fix warning"
This reverts commit 2e8aecd52d.
* Fix display not fully redrawing
* T-Deck should get color too
* Emote Revamp
* Update emotes.cpp
* Poo Emote fix
* Trunk fix
* Add secret test menu and number picker
* Missed bits
* Save colors between reboots
* Save Clock Face election to protobuf
* Make reboot first, then settings
* Add padding for single line pop-ups
* Compass saving and faster menus
* Resolve build issue with Excluding GPS
* Resolve issue with memory bars on EInk
* Add brightness settings for supported screen (#7182)
* Add brightness menu.
* add loop destination selection.
* Bring back color (and sanity) to the menus!
* Trunk
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
Co-authored-by: Wilson <m.tools@qq.com>
* Add 12pt fonts
* Add fontMedium
In addition to fontSmall and fontLarge
* Set fonts in nicheGraphics.h
* Change all uses of fontLarge to fontMedium
fontLarge was previously set at 9pt. fontLarge is now 12pt, fontMedium is 9pt. (NB: fonts may be customized per-variant)
* Use fontLarge with "All Messages" and "DMs" applets
* Documentation
* Add support for RAK3112 variant with necessary configurations and definitions
* Add the configuration of the LED pin
* Refactor rak3112 variant configuration: update name, remove unused files,
* Update RAK3112 configuration: refine memory settings, adjust GPS pin definitions
* Update RAK3112 hardware vendor definition to use correct model
* configure LED pins and update module definitions
* Update USB mode configuration for RAK3112 board
* Update power and battery configuration in rak3112 variant
* Cancel the modification of mesh.pb.h
* Rename RAKwireless RAK3112 to RAK3312
---------
Co-authored-by: daniel <daniel.cao@rakwireless.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Update platformio inis for stm32 platform and wio-e5 variant for enabling i2c
* Don't reference timezone functions if MESHTASTIC_EXCLUDE_TZ is defined
* Use custom pow_of_two in RadioInterface instead of floating-point pow()
* First pass: enable sensors for STM32wL
* Fix AirQualityTelemetryModule being created if the PM25AQI header is missing
* Link in power sensor libraries
* more ini tweaks
* Add =1 to EXCLUDE defines, fix indentation.
* Drop HAS_WIRE in ini, it's defined in architecture.h
* Fix build when power sensor libraries are missing
Make MAX sensor integration into Power.cpp optional based on its library header existing.
Also make NullSensor expose a voltage and current sensor, because Power calls directly into these for INA sensors.
This lets us remove all the deps for the STM32WL platform.
* Change default I2C for RAK3172 to be I2C1, not I2C2
* Respect the laws of mathematics (oops)
* Update Favorite Node Message Options to unify against other screens
* Rebuild Horizontal Battery, Resolve overlap concerns
* Update positioning on Message frame and fix drawCommonHeader overlay
* Beginnings of creating isHighResolution bool
* Fixup determineResolution()
* Implement isHighResolution in place of SCREEN_WIDTH > 128 checks
* Line Spacing bound to isHighResolution
* Analog Clock for all
* Add AM/PM to Analog Clock if isHighResolution and not TWatch
* Simple Menu Queue, and add time menu
* Fix prompt string for 12/24 hour picker
* More menu banners into functions
* Fix Action Menu on Home frame
* Correct pop-up calculation size and continue to leverage isHighResolution
* Move menu bits to MenuHandler
* Plumb in the digital/analog picker
* Correct Clock Face Picker title
* Clock picker fixes
* Migrate the rest of the menus to MenuHandler.*
* Add compass menu and needle point option
* Minor fix for compass point menu
* Correct Home menu into typical format
* Fix emoji bounce, overlap, and missing commonHeader
* Sanitize long_names and removed unused variables
* Slightly better sanitizeString variation
* Resolved apostrophe being shown as upside down question mark
* Gotta keep height and width in expected order
* Remove Second Hand for Analog Clock on EInk displays
* Fix Clock menu option decision tree
* Improvements to Eink Navigation
* Pause Banner for Eink moved to bottom
* Updated working for 12-/24-hour menu and Added US/Arizona to timezone picker
* Add Adhoc Ping and resolve error with std::string sanitized
* Hide quick toggle as option is available within Action Menu, commented out for the moment
* Remove old battery icon and option, use drawCommonHeader throughout, re-add battery to Clock frames
* fix misc build warnings. NFC
* Update Analog Clock on EInk to show more digits
* Establish Action Menu on all node list screens, add NodeDB reset (with confirmation) option
* Add Toggle Backlight for EInk Displays
* Suppress action screen Full refresh for Eink
* Adjust drawBluetoothConnectedIcon on TWatch
* Maintain clock frame when switching between Clock Faces
* Move modules beyond the clock in navigation
* addressed the conflicts, and changed target branch to 2.7-MiscFixes-Week1
* cleanup, cheers
* Add AM/PM to low resolution clock also
* Small adjustments to AM/PM replacement across various devices
* Resolve dangling pointer issues with sanitize code
* Update comments for Screen.cpp related to module load change
* Trunk runs
* Update message caching to correct aged timestamp
* Menu wording adjustments
* Time Format wording
* Use all the rows on EInk since with autohide the navigation bar
* Finalize Time Format picker word change
* Retired drawFunctionOverlay code
No longer being used
* Actually honor the points-north setting
* Trunk
* Compressed action list
* Update no-op showOverlayBanner function
* trunk
* Correct T_Watch_S3 specific line
* Autosized Action menu per screen
* Finalize Autosized Action menu per screen
* Unify Message Titles
* Reorder Timezones to match expectations
* Adjust text location for pop-ups
* Revert "Actually honor the points-north setting"
This reverts commit 20988aa4fa.
* Make NodeDB sort its internal vector when lastheard is updated. Don't sort in NodeListRenderer
* Update src/graphics/draw/NodeListRenderer.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/mesh/NodeDB.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Pass by reference -- Thanks Copilot!
* Throttle sorting just a touch
* Check more carefully for own node
* Eliminate some now-unneeded sorting
* Move function after include
* Putting Modules back to position 0 and some trunk checks found
* Add Scrollbar for Action menus
* Second attempt to move modules down the navigation bar
* Continue effort of moving modules in the navigation
* Canned Messages tweak
* Replicate Function + Space through the Menu System
* Move init button parameters into config struct (#7145)
* Remove bundling of web-ui from ESP32 devices (#7143)
* Fixed triple click GPS toggle bungle
* Move init button parameters into config struct
* Reapply "Actually honor the points-north setting"
This reverts commit 42c1967e7b.
* Actually do compass pointings correctly
* Tweak to node bearings
* Menu wording tweaks
* Get the compass_north_top logic right
* Don't jump frames after setting Compass
* Get rid of the extra bearingTo functions
* Don't blink Mail on EInk Clock Screens
* Actually set lat and long
* Calibrate
* Convert Radians to Degrees
* More degree vs radians fixes
* De-duplicate draw arrow function
* Don't advertise compass calibration without an accell thread.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: csrutil <keming.cao@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* initial commit of eink version
* fit for ssd1682 initial test run hud
* update to solve mirroring problem
* change eink screen ic to ssd1680
* remove HINK_E0213A367
* trunk fmt
* fix wrong type
* fix some fmt
* Add missed include
* Another Warning fix
* Add another HAS_SCREEN
* Namespace fixes
* Removed depricated destination types and re-factored destination screen
* Get rid of Arduino Strings
* Clean up after Copilot
* SixthLine Def, Screen Rename
Added Sixth Line Definition Screen Rename, and Automatic Line Adjustment
* Consistency is hard - fixed "Sixth"
* System Frame Updates
Adjusted line construction to ensure we fit maximum content per screen.
* Fix up notifications
* Add a couple more ifdef HAS_SCREEN lines
* Add screen->isOverlayBannerShowing()
* Don't forget the invert!
* Adjust Nodelist Center Divider
Adjust Nodelist Center Divider
* Fix variable casting
* Fix entryText variable as empty before update to fix validation
* Altitude is int32_t
* Update PowerTelemetry to have correct data type
* Fix cppcheck warnings (#6945)
* Fix cppcheck warnings
* Adjust logic in Power.cpp for power sensor
---------
Co-authored-by: Jason P <applewiz@mac.com>
* More pixel wrangling so things line up NodeList edition
* Adjust NodeList alignments and plumb some background padding for a possible title fix
* Better alignment for banner notifications
* Move title into drawCommonHeader; initial screen tested
* Fonts make spacing items difficult
* Improved beeping booping and other buzzer based feedback (#6947)
* Improved beeping booping and other buzzer based feedback
* audible button feedback (#6949)
* Refactor
---------
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
* Sandpapered the corners of the notification popup
* Finalize drawCommonHeader migration
* Update Title of Favorite Node Screens
* Update node metric alignment on LoRa screen
* Update the border for popups to separate it from background
* Update PaxcounterModule.cpp with CommonHeader
* Update WiFi screen with CommonHeader and related data reflow
* It was not, in fact, pointing up
* Fix build on wismeshtap
* T-deck trackball debounce
* Fix uptime on Device Focused page to actually detail
* Update Sys screen for new uptime, add label to Freq/Chan on LoRa
* Don't display DOP any longer, make Uptime consistent
* Revert Uptime change on Favorites, Apply to Device Focused
* Label the satelite number to avoid confusion
* Boop boop boop boop
* Correct GPS positioning and string consistency across strings for GPS
* Fix GPS text alignment
* Enable canned messages by default
* Don't wake screen on new nodes
* Cannedmessage list emote support added
* Fn+e emote picker for freetext screen
* Actually block CannedInput actions while display is shown
* Add selection menu to bannerOverlay
* Off by one
* Move to unified text layouts and spacing
* Still my Fav without an "e"
* Fully remove EVENT_NODEDB_UPDATED
* Simply LoRa screen
* Make some char pointers const to fix compilation on native targets
* Update drawCompassNorth to include radius
* Fix warning
* button thread cleanup
* Pull OneButton handling from PowerFSM and add MUI switch (#6973)
* Trunk
* Onebutton Menu Support
* Add temporary clock icon
* Add gps location to fsi
* Banner message state reset
* Cast to char to satisfy compiler
* Better fast handling of input during banner
* Fix warning
* Derp
* oops
* Update ref
* Wire buzzer_mode
* remove legacy string->print()
* Only init screen if one found
* Unsigned Char
* More buttonThread cleaning
* screen.cpp button handling cleanup
* The Great Event Rename of 2025
* Fix the Radiomaster
* Missed trackball type change
* Remove unused function
* Make ButtonThread an InputBroker
* Coffee hadn't kicked in yet
* Add clock icon for Navigation Bar
* Restore clock screen definition code - whoops
* ExternalNotifications now observe inputBroker
* Clock rework (#6992)
* Move Clock bits into ClockRenderer space
* Rework clock into all device navigation
* T-Watch Actually Builds Different
* Compile fix
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Add AM/PM to Digital Clock
* Flip Seconds and AM/PM on Clock Display
* Tik-tok pixels are hard
* Fix builds on Thinknode M1
* Check for GPS and don't crash
* Don't endif til the end
* Rework the OneButton thread to be much less of a mess. (#6997)
* Rework the OneButton thread to be much less of a mess. And break lots of targets temporarily
* Update src/input/ButtonThread.h
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* fix GPS toggle
* Send the shutdown event, not just the kbchar
* Honor the back button in a notificaiton popup
* Draw the right size box for popup with options
* Try to un-break all the things
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* 24-hour Clock Should have leading zero, but not 12-hour
* Fixup some compile errors
* Add intRoutine to ButtonThread init, to get more responsive user button back
* Add Timezone picker
* Fix Warning
* Optionally set the initial selection for the chooser popup
* Make back buttons work in canned messages
* Drop the wrapper classes
* LonPressTime now configurable
* Clock Frame can not longer be blank; just add valid time
* Back buttons everywhere!
* Key Verification confirm banner
* Make Elecrow M* top button a back button
* Add settings saves
* EInk responsiveness fixes
* Linux Input Fixes
* Add Native Trackball/Joystick support, and move UserButton to Input
* No Flight Stick Mode
* Send input event
* Add Channel Utilization to Device Focused frame
* Don't shift screens when we draw new ones
* Add showOverlayBanner arguments to no-op
* trunk
* Default Native trackball to NC
* Fix crash in simulator mode
* Add longLong button press
* Get the args right
* Adjust Bluetooth Pairing Screen to account for bottom navigation.
* Trackball everywhere, and unPhone buttons
* Remap visionmaster secondary button to TB_UP
* Kill ScanAndSelect
* trunk
* No longer need the canned messages input filter
* All Canned All the time
* Fix stm32 compile error regarding inputBroker
* Unify tft lineheights (#7033)
* Create variable line heights based upon SCREEN_HEIGHT
* Refactor textPositions into method -> getTextPositions
* Update SharedUIDisplay.h
---------
Co-authored-by: Jason P <applewiz@mac.com>
* Adjust top distance for larger displays
* Adjust icon sizes for larger displays
* Fix Paxcounter compile errors after code updates
* Pixel wrangling to make larger screens fit better
* Alert frame has precedence over banner -- for now
* Unify on ALT_BUTTON
* Align AM/PM to the digit, not the segment on larger displays
* Move some global pin defines into configuration.h
* Scaffolding for BMM150 9-axis gyro
* Alt button behavior
* Don't add the blank GPS frames without HAS_GPS
* EVENT_NODEDB_UPDATED has been retired
* Clean out LOG_WARN messages from debugging
* Add dismiss message function
* Minor buttonThread cleanup
* Add BMM150 support
* Clean up last warning from dev
* Simplify bmm150 init return logic
* Add option to reply to messages
* Add minimal menu upon selecting home screen
* Move Messages to slot 2, rename GPS to Position, move variables nearer functional usage in Screen.cpp
* Properly dismiss message
* T-Deck Trackball press is not user button
* Add select on favorite frame to launch cannedMessage DM
* Minor wording change
* Less capital letters
* Fix empty message check, time isn't reliable
* drop dead code
* Make UIRenderer a static class instead of namespace
* Fix the select on favorite
* Check if message is empty early and then 'return'
* Add kb_found, and show the option to launch freetype if appropriate
* Ignore impossible touchscreen touches
* Auto scroll fix
* Move linebreak after "from" for banners to maximize screen usage.
* Center "No messages to show" on Message frame
* Start consolidating buzzer behavior
* Fixed signed / unsigned warning
* Cast second parameter of max() to make some targets happy
* Cast kbchar to (char) to make arduino string happy
* Shorten the notice of "No messages"
* Add buzzer mode chooser
* Add regionPicker to Lora icon
* Reduce line spacing and reorder Position screen to resolve overlapping issues
* Update message titles, fix GPS icons, add Back options
* Leftover boops
* Remove chirp
* Make the region selection dismissable when a region is already set
* Add read-aloud functionality on messages w/ esp8266sam
* "Last Heard" is a better label
* tweak the beep
* 5 options
* properly tear down freetext upon cancel
* de-convelute canned messages just a bit
* Correct height of Mail icon in navigation bar
* Remove unused warning
* Consolidate time methods into TimeFormatters
* Oops
* Change LoRa Picker Cancel to Back
* Tweak selection characters on Banner
* Message render not scrolling on 5th line
* More fixes for message scrolling
* Remove the safety next on text overflow - we found that root cause
* Add pin definitions to fix compilation for obscure target
* Don't let the touchscreen send unitialized kbchar values
* Make virtual KB just a bit quicker
* No more double tap, swipe!
* Left is left, and Right is right
* Update horizontal lightning bolt design
* Move from solid to dashed separator for Message Frame
* Single emote feature fix
* Manually sort overlapping elements for now
* Freetext and clearer choices
* Fix ESP32 InkHUD builds on the unify-tft branch (#7087)
* Remove BaseUI branding
* Capitalization is fun
* Revert Meshtastic Boot Frame Changes
* Add ANZ_433 LoRa region to picker
* Update settings.json
---------
Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* chore(seeed_xiao_nrf52840_kit): Use build flag for L76K GNSS, rename variant.h ifdef
Signed-off-by: Andrew Yong <me@ndoo.sg>
* feat(seeed_xiao_nrf52840_kit): Support multiple SX126x pinouts via build flags
Signed-off-by: Andrew Yong <me@ndoo.sg>
* feat(seeed_xiao_nrf52840_kit): Pin D0 as user button if pin is unused
Signed-off-by: Andrew Yong <me@ndoo.sg>
* feat: EBYTE E22 and NiceRF gain and SX1262 max power defines
Signed-off-by: Andrew Yong <me@ndoo.sg>
* chore(xiao_ble): Move variant to DIY and extend from seeed_xiao_nrf52840_kit
Signed-off-by: Andrew Yong <me@ndoo.sg>
* feat(seeed_xiao_nrf52840_kit): Pin D6, D7 as I2C SDA, SCL if pins are unused
Signed-off-by: Andrew Yong <me@ndoo.sg>
---------
Signed-off-by: Andrew Yong <me@ndoo.sg>
