598 Commits

Author	SHA1	Message	Date
Andrew Yong	79b710a108	fix: Respect LED_STATE_ON for power and user LED (#6976) ... Signed-off-by: Andrew Yong <me@ndoo.sg>	2025-06-07 06:44:54 -05:00
Andrew Yong	070deb290f	seeed_xiao_nrf52840_kit improvements (#6930) ... * feat: seeed_xiao_nrf52840_kit improvements - LEDs: - Change RGB LED to be active low as it is common anode - Remove re-definition of LED_PIN - Use red LED to indicate flash writes - Use blue LED as user LED (External Notification module) - GPIO: Re-word unused BUTTON_PIN comment - Wire: Set I2C pins to match XIAO nRF52840 Sense's LSM6DS3TR IMU - Battery: - Use charge LED to detect charging state - Move voltage divider boilerplate out of src/main.cpp and into initVariant() - Fix dependencies for above in related XIAO BLE DIY variants Build tested variants: - seeed_xiao_nrf52840_kit - xiao_ble - seeed-xiao-nrf52840-wio-sx1262 Flashed to and tested on hardware: - seeed_xiao_nrf52840_kit Signed-off-by: Andrew Yong <me@ndoo.sg> * chore(seeed_xiao_nrf52840_kit): Re-order generic GPIO definitions Signed-off-by: Andrew Yong <me@ndoo.sg> * chore: Use ADC_CTRL for XIAO nRF52840 Signed-off-by: Andrew Yong <me@ndoo.sg> --------- Signed-off-by: Andrew Yong <me@ndoo.sg>	2025-06-05 06:45:43 -05:00
Michael Cullen	7d95b487ef	Add PCT2075 Temperature Sensor (#6829) ... This is an I2C temperature sensor. It is intended to be a drop-in compatible sensor for the LM75, however it is more accurate. Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-25 07:29:02 -05:00
Jonathan Bennett	066609a718	Remove incomplete compass boot calibration (#6825) ... The made it in from testing unintentionally.	2025-05-16 12:29:08 +10:00
Jonathan Bennett	3a6fc668d8	20948 compass support (#6707) ... * Add __has_include blocks for sensors * Put BMP and BME back in the right sensors * Split environmental_base to environmental_extra, to compile the working sensor libs for Native * Remove hard-coded checks for ARCH_PORTDUINO * Un-clobber bmx160 * Move BusIO to environmental_extra due to Armv7 compile error * Move to forked BusIO for the moment * Switch to Meshtastic ICM-20948 lib for Portduino support * Use 20948 for compass direction * Compass is more than just RAK4631 * Cleanup for 20948 compass * use Meshtastic branch of 20948 lib * Check for HAS_SCREEN for showing calibration screen * No accelerometerThread on STM32	2025-05-07 18:38:42 -05:00
Jorropo	a7ef9e9c08	udp-multicast: remove the thread from the multicast thread API (#6685) ... * udp-multicast: remove the thread from the multicast thread API The whole API is parallel & asynchronous we don't need to start a thread ourself, the implementation probably does when we call start listening already. * Take copilot advice and call it a handler --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-30 05:52:42 -05:00
Thomas Göttgens	ef14967fbf	Crowpanel 2.4,2.8 and 3.5 support (#6355) ... Co-authored-by: mverch67 <manuel.verch@gmx.de>	2025-04-17 16:03:37 +02:00
Benjamin Kyd	64c8bde04a	Update platformio.ini to exclude unused modules from t1000-e (#6584) ... * Update platformio.ini to exclude unused modules * Add No EXT GPIO flag and also correct some exclusions in main * CANNEDMSG != CANNEDMESSAGES * Remove NO_EXT_GPIO	2025-04-16 10:12:23 +02:00
Thomas Göttgens	c94dd1e331	Minor adjustment of blink codes and 'unstick' the M2 button. (#6521)	2025-04-08 10:46:39 -05:00
Thomas Göttgens	a084073cc1	inkhud doesn't have a button thread (#6513)	2025-04-07 08:35:51 -05:00
Thomas Göttgens	606abfc116	Fix several features of M1 and M2 (i know what the 7 is now ...) (#6507) ... * Fix several features of M1 and M2 (i know what the 7 is now ...) * 'THe' should be 'The'. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * remove floating definition --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-07 05:46:22 -05:00
Nasimovy	7494106170	TCA8418 initial config + basic 3x4 keypad config (#6422) ... * TCA8418 with base config for 3x4 keypad * replaced k with uppercase K * change detection method * reflect changes #6381 --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-03 14:18:18 -05:00
Clément Hampaï	f6ed10f329	Added initial support for Texas Instruments LP5562 (#6381) ... * Added initial support for Texas Instrument LP5562 * Added proper support for Ambient Lighting * Code merge for all RBG_LED enabled devices * Fixed forgotten log_info & added firstRGBLED()	2025-04-01 22:39:40 +02:00
Ben Meadors	a5efbfccd7	Disable bluetooth config on rp2040, portduino (for now), and stm32 (#6465) ... * Disable bluetooth config on rp2040, portduino (for now), and stm32 * Add comments and exclude C6	2025-03-31 06:32:54 -05:00
Ben Meadors	39408fd3b1	Disable network config for non-eth_gateway nrf52 and non-W RP2040 targets (#6462) ... * Disable network config for non-eth_gateway nrf52 and non-W RP2040 targets * Use HAS_ETHERNET logic	2025-03-31 05:50:53 -05:00
Thomas Göttgens	6c7c0770f9	add ThinkNode M2 Support (#6354) ... * [WIP] Base firmware pending support for 2nd button * Update button behaviour. Still WIP * [WIP] Base firmware pending support for 2nd button * Update button behaviour. Still WIP * change env to lowercase Co-authored-by: rcarteraz <robert.l.carter2@gmail.com> * yea - well - what else is new? * fix secondary button behavior and update trunk --------- Co-authored-by: rcarteraz <robert.l.carter2@gmail.com>	2025-03-28 19:55:00 -05:00
Thomas Göttgens	4a12b4eb32	add Thinknode-M1 (#6435) ... * ThinkNode M1 * Update Epaper Driver * Your day isn't complete unless trunk has complained about your formatting at least once.	2025-03-28 21:22:17 +01:00
Ben Meadors	4590ef2e7b	Revert "TCA8418 initial config + basic 3x4 keypad config (#6320)" (#6410) ... This reverts commit 13101c1bab.	2025-03-27 08:31:57 -05:00
Jorropo	6429eca5e4	udp-multicast: do not listen for incoming udp multicast packets if disabled (#6397) ... Currently the config flag only control if packets are sent, not received. As we discussed in VC this is not what was intended.	2025-03-26 18:10:56 +11:00
Nasimovy	13101c1bab	TCA8418 initial config + basic 3x4 keypad config (#6320) ... * add TCA8418 to configuration.h added the TCA8418 * add TCA8418 to ScanI2C.cpp add TCA8418 * add TCA8418KB to ScanI2C.h add TCA8418KB * add TCA8418KB ScanI2CTwoWire.cpp add TCA8418KB * Create TCA8418Keyboard.cpp Create TCA8418Keyboard.cpp * Create TCA8418Keyboard.h Create TCA8418Keyboard.h * add TCA8418 to kbI2cBase.cpp add TCA8418 * add TCA8418 to kbI2cBase.h add TCA8418 * add TCA8418KB to main.cpp add TCA8418KB * add TCA8418KB to cardKbI2cImpl.cpp add TCA8418KB * Update TCA8418 kbI2cBase.cpp * enable debug TCA8418 * Nokia 5130 config * Update TCA8418Keyboard.h old version in initial commit * Update ScanI2CTwoWire.cpp * add tap_interval and backlight_on to constructor * Create TCA8418-layouts.cpp TCA8418-layout 3x4 should work Nokia 5130 needs editing. * put layouts in different file + adjusted code for variable matrix sizes * rename TCA8418-layouts.cpp to TCA8418Layouts.cpp + add endif * Update TCA8418Keyboard.cpp name change layouts * forgot a \ * Create TCA8418Layouts.h * Update TCA8418Keyboard.cpp * add include forgot include * Update TCA8418Keyboard.cpp * Update TCA8418Keyboard.h * Update TCA8418Layouts.h * revert to keyboard layout in main TCA8418Keyboard.cpp * fixed the address * changed ordering of constructor * reflect changes #6371 * edit config.h * bug fix fast pressing multiple buttons + clean up scanI2CTwoWire.cpp * trunked --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net>	2025-03-26 13:29:18 +11:00
Jorropo	d1068fd1e4	Add UDP multicast support on linux. (#6342) ... * Add UDP multicast support on linux. Closes #6326 We tested it an it works. This is really hacky to say the least. * Add libuv to Linux packaging * Trunkadunk * Correct ref * Add libuv1-dev to setup-native --------- Co-authored-by: vidplace7 <vidplace7@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-20 08:47:39 -05:00
Thomas Göttgens	1640fb105d	new device: Lilygo T-Eth-Elite (#6321)	2025-03-15 14:15:35 +01:00
todd-herbert	5de6bc1851	Fix excluded_modules metadata with InkHUD (#6272)	2025-03-08 19:06:32 -06:00
Tom Fifield	284598ed56	Add detection support for LTR390UV Sensor (#6009) ... * Add detection support for LTR390UV Sensor The LTR390 is a UV sensor. This patch adds detection support, for a future patch that will add the full sensor support. * Update ScanI2C.h	2025-03-07 18:51:38 +08:00
Andrik45719	b25db1f42c	E22-400M SX126X_DIO3_TCXO_VOLTAGE fix (#6232) ... Added TCXO voltage setting for SX1268 based module to fix error: Calibration failed, device errors: 0x20 SX126x init result -707	2025-03-06 09:44:53 +01:00
Chris Danis	f5e0e282b6	environment: add DPS310 high-accuracy barometer (#6237) ... * dps310: initial scan support * dps310 sensor support * new protobufs * new protobufs * address cr --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-06 11:58:18 +08:00
Ben Meadors	99d3e5eb70	2.6 changes (#5806) ... * 2.6 protos * [create-pull-request] automated change (#5789) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Hello world support for UDP broadcasts over the LAN on ESP32 (#5779) * UDP local area network meshing on ESP32 * Logs * Comment * Update UdpMulticastThread.h * Changes * Only use router->send * Make NodeDatabase (and file) independent of DeviceState (#5813) * Make NodeDatabase (and file) independent of DeviceState * 70 * Remove logging statement no longer needed * Explicitly set CAD symbols, improve slot time calculation and adjust CW size accordingly (#5772) * File system persistence fixes * [create-pull-request] automated change (#6000) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Update ref * Back to 80 * [create-pull-request] automated change (#6002) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * 2.6 <- Next hop router (#6005) * Initial version of NextHopRouter * Set original hop limit in header flags * Short-circuit to FloodingRouter for broadcasts * If packet traveled 1 hop, set `relay_node` as `next_hop` for the original transmitter * Set last byte to 0xFF if it ended at 0x00 As per an idea of @S5NC * Also update next-hop based on received DM for us * temp * Add 1 retransmission for intermediate hops when using NextHopRouter * Add next_hop and relayed_by in PacketHistory for setting next-hop and handle flooding fallback * Update protos, store multiple relayers * Remove next-hop update logic from NeighborInfoModule * Fix retransmissions * Improve ACKs for repeated packets and responses * Stop retransmission even if there's not relay node * Revert perhapsRebroadcast() * Remove relayer if we cancel a transmission * Better checking for fallback to flooding * Fix newlines in traceroute print logs * Stop retransmission for original packet * Use relayID * Also when want_ack is set, we should try to retransmit * Fix cppcheck error * Fix 'router' not in scope error * Fix another cppcheck error * Check for hop_limit and also update next hop when `hop_start == hop_limit` on ACK Also check for broadcast in `getNextHop()` * Formatting and correct NUM_RETRANSMISSIONS * Update protos * Start retransmissions in NextHopRouter if ReliableRouter didn't do it * Handle repeated/fallback to flooding packets properly First check if it's not still in the TxQueue * Guard against clients setting `next_hop`/`relay_node` * Don't cancel relay if we were the assigned next-hop * Replies (e.g. tapback emoji) are also a valid confirmation of receipt --------- Co-authored-by: GUVWAF <thijs@havinga.eu> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com> * fix "native" compiler errors/warnings NodeDB.h * fancy T-Deck / SenseCAP Indicator / unPhone / PICOmputer-S3 TFT screen (#3259) * lib update: light theme * fix merge issue * lib update: home buttons + button try-fix * lib update: icon color fix * lib update: fix instability/crash on notification * update lib: timezone * timezone label * lib update: fix set owner * fix spiLock in RadioLibInterface * add picomputer tft build * picomputer build * fix compiler error std::find() * fix merge * lib update: theme runtime config * lib update: packet logger + T-Deck Plus * lib update: mesh detector * lib update: fix brightness & trackball crash * try-fix less paranoia * sensecap indicator updates * lib update: indicator fix * lib update: statistic & some fixes * lib-update: other T-Deck touch driver * use custom touch driver for Indicator * lower tft task prio * prepare LVGL ST7789 driver * lib update: try-fix audio * Drop received packets from self * Additional decoded packet ignores * Honor flip & color for Heltec T114 and T190 (#4786) * Honor TFT_MESH color if defined for Heltec T114 or T190 * Temporary: point lib_deps at fork of Heltec's ST7789 library For demo only, until ST7789 is merged * Update lib_deps; tidy preprocessor logic * Download debian files after firmware zip * set title for protobufs bump PR (#4792) * set title for version bump PR (#4791) * Enable Dependabot * chore: trunk fmt * fix dependabot syntax (#4795) * fix dependabot syntax * Update dependabot.yml * Update dependabot.yml * Bump peter-evans/create-pull-request from 6 to 7 in /.github/workflows (#4797) * Bump docker/build-push-action from 5 to 6 in /.github/workflows (#4800) * Actions: Semgrep Images have moved from returntocorp to semgrep (#4774) https://hub.docker.com/r/returntocorp/semgrep notes: "We've moved! Official Docker images for Semgrep now available at semgrep/semgrep." Patch updates our CI workflow for these images. Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Bump meshtestic from `31ee3d9` to `37245b3` (#4799) Bumps [meshtestic](https://github.com/meshtastic/meshTestic) from `31ee3d9` to `37245b3`. - [Commits](31ee3d90c8...37245b3d61) --- updated-dependencies: - dependency-name: meshtestic dependency-type: direct:production ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * [create-pull-request] automated change (#4789) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Bump pnpm/action-setup from 2 to 4 in /.github/workflows (#4798) Bumps [pnpm/action-setup](https://github.com/pnpm/action-setup) from 2 to 4. - [Release notes](https://github.com/pnpm/action-setup/releases) - [Commits](https://github.com/pnpm/action-setup/compare/v2...v4) --- updated-dependencies: - dependency-name: pnpm/action-setup dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Raspberry Pico2 - needs protos * Re-order doDeepSleep (#4802) Make sure PMU sleep takes place before I2C ends * [create-pull-request] automated change * heltec-wireless-bridge requires Proto PR first * feat: trigger class update when protobufs are changed * meshtastic/ is a test suite; protobufs/ contains protobufs; * Update platform-native to pick up portduino crash fix (#4807) * Hopefully extract and commit to meshtastic.github.io * CI fixes * [Board] DIY "t-energy-s3_e22" (#4782) * New variant "t-energy-s3_e22" - Lilygo T-Energy-S3 - NanoVHF "Mesh-v1.06-TTGO-T18" board - Ebyte E22 Series * add board_level = extra * Update variant.h --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> * Consolidate variant build steps (#4806) * poc: consolidate variant build steps * use build-variant action * only checkout once and clean up after run * Revert "Consolidate variant build steps (#4806)" (#4816) This reverts commit 9f8d86cb25. * Make Ublox code more readable (#4727) * Simplify Ublox code Ublox comes in a myriad of versions and settings. Presently our configuration code does a lot of branching based on versions being or not being present. This patch adds version detection earlier in the piece and branches on the set gnssModel instead to create separate setup methods for Ublox 6, Ublox 7/8/9, and Ublox10. Additionally, adds a macro to make the code much shorter and more readable. * Make trunk happy * Make trunk happy --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Consider the LoRa header when checking packet length * Minor fix (#4666) * Minor fixes It turns out setting a map value with the index notation causes an lookup that can be avoided with emplace. Apply this to one line in the StoreForward module. Fix also Cppcheck-determined highly minor performance increase by passing gpiochipname as a const reference :) The amount of cycles used on this laptop while learning about these callouts from cppcheck is unlikely to ever be more than the cycles saved by the fixes ;) * Update PortduinoGlue.cpp * Revert "Update classes on protobufs update" (#4824) * Revert "Update classes on protobufs update" * remove quotes to fix trunk. --------- Co-authored-by: Tom Fifield <tom@tomfifield.net> * Implement optional second I2C bus for NRF52840 Enabled at compile-time if WIRE_INFERFACES_COUNT defined as 2 * Add I2C bus to Heltec T114 header pins SDA: P0.13 SCL: P0.16 Uses bus 1, leaving bus 0 routed to the unpopulated footprint for the RTC (general future-proofing) * Tidier macros * Swap SDA and SCL SDA=P0.16, SCL=P0.13 * Refactor and consolidate time window logic (#4826) * Refactor and consolidate windowing logic * Trunk * Fixes * More * Fix braces and remove unused now variables. There was a brace in src/mesh/RadioLibInterface.cpp that was breaking compile on some architectures. Additionally, there were some brace errors in src/modules/Telemetry/AirQualityTelemetry.cpp src/modules/Telemetry/EnvironmentTelemetry.cpp src/mesh/wifi/WiFiAPClient.cpp Move throttle include in WifiAPClient.cpp to top. Add Default.h to sleep.cpp rest of files just remove unused now variables. * Remove a couple more meows --------- Co-authored-by: Tom Fifield <tom@tomfifield.net> * Rename message length headers and set payload max to 255 (#4827) * Rename message length headers and set payload max to 255 * Add MESHTASTIC_PKC_OVERHEAD * compare to MESHTASTIC_HEADER_LENGTH --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> * Check for null before printing debug (#4835) * fix merge * try-fix crash * lib update: fix neighbors * fix GPIO0 mode after I2S audio * lib update: audio fix * lib update: fixes and improvements * extra * added ILI9342 (from master) * device-ui persistency * review update * fix request, add handled * fix merge issue * fix merge issue * remove newline * remove newlines from debug log * playing with locks; but needs more testing * diy mesh-tab initial files * board definition for mesh-tab (not yet used) * use DISPLAY_SET_RESOLUTION to avoid hw dependency in code * no telemetry for Indicator * 16MB partition for Indicator * 8MB partition for Indicator * stability: add SPI lock before saving via littleFS * dummy for config transfer (#5154) * update indicator (due to compile and linker errors) * remove faulty partition line * fix missing include * update indicator board * update mesh-tab ILI9143 TFT * fix naming * mesh-tab targets * try: disable duplicate locks * fix nodeDB erase loop when free mem returns invalid value (0, -1). * upgrade toolchain for nrf52 to gcc 9.3.1 * try-fix (workaround) T-Deck audio crash * update mesh-tab tft configs * set T-Deck audio to unused 48 (mem mclk) * swap mclk to gpio 21 * update meshtab voltage divider * update mesh-tab ini * Fixed the issue that indicator device uploads via rp2040 serial port in some cases. * Fixed the issue that the touch I2C address definition was not effective. * Fixed the issue that the wifi configuration saved to RAM did not take effect. * rotation fix; added ST7789 3.2" display * dreamcatcher: assign GPIO44 to audio mclk * mesh-tab touch updates * add mesh-tab powersave as default * fix DIO1 wakeup * mesh-tab: enable alert message menu * Streamline board definitions for first tech preview. (#5390) * Streamline board definitions for first tech preview. TBD: Indicator Support * add point-of-checkin * use board/unphone.json --------- Co-authored-by: mverch67 <manuel.verch@gmx.de> * fix native targets * add RadioLib debugging options for (T-Deck) * fix T-Deck build * fix native tft targets for rpi * remove wrong debug defines * t-deck-tft button is handled in device-ui * disable default lightsleep for indicator * Windows Support - Trunk and Platformio (#5397) * Add support for GPG * Add usb device support * Add trunk.io to devcontainer * Trunk things * trunk fmt * formatting * fix trivy/DS002, checkov/CKV_DOCKER_3 * hide docker extension popup * fix trivy/DS026, checkov/CKV_DOCKER_2 * fix radioLib warnings for T-Deck target * wake screen with button only * use custom touch driver * define wake button for unphone * use board definition for mesh-tab * mesh-tab rotation upside-down * update platform native * use MESH_TAB hardware model definition * radioLib update (fix crash/assert) * reference seeed indicator fix commit arduino-esp32 * Remove unneeded file change :) * disable serial module and tcp socket api for standalone devices (#5591) * disable serial module and tcp socket api for standalone devices * just disable webserver, leave wifi available * disable socket api * mesh-tab: lower I2C touch frequency * log error when packet queue is full * add more locking for shared SPI devices (#5595) * add more locking for shared SPI devices * call initSPI before the lock is used * remove old one * don't double lock * Add missing unlock * More missing unlocks * Add locks to SafeFile, remove from `readcb`, introduce some LockGuards * fix lock in setupSDCard() * pull radiolib trunk with SPI-CS fixes * change ContentHandler to Constructor type locks, where applicable --------- Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: GUVWAF <thijs@havinga.eu> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> * T-Deck: revert back to lovyanGFX touch driver * T-Deck: increase allocated PSRAM by 50% * mesh-tab: streamline target definitions * update RadioLib 7.1.2 * mesh-tab: fix touch rotation 4.0 inch display * Mesh-Tab platformio: 4.0inch: increase SPI frequency to max * mesh-tab: fix rotation for 3.5 IPS capacitive display * mesh-tab: fix rotation for 3.2 IPS capacitive display * restructure device-ui library into sub-directories * preparations for generic DisplayDriverFactory * T-Deck: increase LVGL memory size * update lib * trunk fmt --------- Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: Jason Murray <15822260+scruplelesswizard@users.noreply.github.com> Co-authored-by: Jason Murray <jason@chaosaffe.io> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Austin <vidplace7@gmail.com> Co-authored-by: virgil <virgil.wang.cj@gmail.com> Co-authored-by: Mark Trevor Birss <markbirss@gmail.com> Co-authored-by: Kalle Lilja <15094562+ThatKalle@users.noreply.github.com> Co-authored-by: GUVWAF <thijs@havinga.eu> * Version this * Update platformio.ini (#6006) * tested higher speed and it works * Un-extra * Add -tft environments to the ci matrix * Exclude unphone tft for now. Something is wonky * fixed Indicator touch issue (causing IO expander issues), added more RAM * update lib * fixed Indicator touch issue (causing IO expander issues), added more RAM (#6013) * increase T-Deck PSRAM to avoid too early out-of-memory when messages fill up the storage * update device-ui lib * Fix T-Deck SD card detection (#6023) * increase T-Deck PSRAM to avoid too early out-of-memory when messages fill up the storage * fix SDCard for T-Deck; allow SPI frequency config * meshtasticd: Add X11 480x480 preset (#6020) * Littlefs per device * 2.6 update * [create-pull-request] automated change (#6037) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * InkHUD UI for E-Ink (#6034) * Decouple ButtonThread from sleep.cpp Reorganize sleep observables. Don't call ButtonThread methods inside doLightSleep. Instead, handle in class with new lightsleep Observables. * InkHUD: initial commit (WIP) Publicly discloses the current work in progress. Not ready for use. * feat: battery icon * chore: implement meshtastic/firmware #5454 Clean up some inline functions * feat: menu & settings for "jump to applet" * Remove the beforeRender pattern It hugely complicates things. If we can achieve acceptable performance without it, so much the better. * Remove previous Map Applet Needs re-implementation to work without the beforeRender pattern * refactor: reimplement map applet Doesn't require own position Doesn't require the beforeRender pattern to precalculate; now all-at-once in render Lays groundwork for fixed-size map with custom background image * feat: autoshow Allow user to select which applets (if any) should be automatically brought to foreground when they have new data to display * refactor: tidy-up applet constructors misc. jobs including: - consistent naming - move initializer-list-only constructors to header - give derived applets unique identifiers for MeshModule and OSThread logging * hotfix: autoshow always uses FAST update In future, it *will* often use FAST, but this will be controlled by a WindowManager component which has not yet been written. Hotfixed, in case anybody is attempting to use this development version on their deployed devices. * refactor: bringToForeground no longer requests FAST update In situations where an applet has moved to foreground because of user input, requestUpdate can be manually called, to upgrade to FAST refresh. More permanent solution for #23e1dfc * refactor: extract string storage from ThreadedMessageApplet Separates the code responsible for storing the limited message history, which was previously part of the ThreadedMessageApplet. We're now also using this code to store the "most recent message". Previously, this was stored in the `InkHUD::settings` struct, which was much less space-efficient. We're also now storing the latest DM, laying the foundation for an applet to display only DMs, which will complement the threaded message applet. * fix: text wrapping Attempts to fix a disparity between `Applet::printWrapped` and `Applet::getWrappedTextHeight`, which would occasionally cause a ThreadedMessageApplet message to render "too short", overlapping other text. * fix: purge old constructor This one slipped through the last commit.. * feat: DM Applet Useful in combination with the ThreadedMessageApplets, which don't show DMs * fix: applets shouldn't handle events while deactivated Only one or two applets were actually doing this, but I'm making a habit of having all applets return early from their event handling methods (as good practice), even if those methods are disabled elsewhere (e.g. not observing observable, return false from wantPacket) * refactor: allow requesting update without requesting autoshow Some applets may want to redraw, if they are displayed, but not feel the information is worth being brought to foreground for. Example: ActiveNodesApplet, when purging old nodes from list. * feat: custom "Recently Active" duration Allows users to tailor how long nodes will appear in the "Recents" applets, to suit the activity level of their mesh. * refactor: rename some applets * fix: autoshow * fix: getWrappedTextHeight Remove the "simulate" option from printWrapped; too hard to keep inline with genuine printing (because of AdafruitGFX Fonts' xAdvance, mabye?). Instead of simulating, we printWrapped as normal, and discard pixel output by setting crop. Both methods are similarly inefficient, apparently. * fix: text wrapping in ThreadedMessageApplet Wrong arguments were passed to Applet::printWrapped * feat: notifications for text messages Only shown if current applet does not already display the same info. Autoshow takes priority over notifications, if both would be used to display the same info. * feat: optimize FAST vs FULL updates New UpdateMediator class counts the number of each update type, and suggets which one to use, if the code doesn't already have an explicit prefence. Also performs "maintenance refreshes" unprovoked if display is not given an opportunity to before a FULL refresh through organic use. * chore: update todo list * fix: rare lock-up of buttons * refactor: backlight Replaces the initial proof-of-concept frontlight code for T-Echo Presses less than 5 seconds momentarily illuminate the display Presses longer than 5 seconds latch the light, requiring another tap to disable If user has previously removed the T-Echo's capacitive touch button (some DIY projects), the light is controlled by the on-screen menu. This fallback is used by all T-Echo devices, until a press of the capacitive touch button is detected. * feat: change tile with aux button Applied to VM-E290. Working as is, but a refactor of WindowManager::render is expected shortly, which will also tidy code from this push. * fix: specify out-of-the-box tile assignments Prevents placeholder applet showing on initial boot, for devices which use a mult-tile layout by default (VM-E290) * fix: verify settings version when loading * fix: wrong settings version * refactor: remove unimplemented argument from requestUpdate Specified whether or not to update "async", however the implementation was slightly broken, Applet::requestUpdate is only handled next time WindowManager::runOnce is called. This didn't allow code to actually await an update, which was misleading. * refactor: renaming Applet::render becomes Applet::onRender. Tile::displayedApplet becomes Tile::assignedApplet. New onRender method name allows us to move some of the pre and post render code from WindowManager into new Applet::render method, which will call onRender for us. * refactor: rendering Bit of a tidy-up. No intended change in behavior. * fix: optimize refresh times Shorter wait between retrying update if display was previously busy. Set anticipated update durations closer to observed values. No signifacant performance increase, but does decrease the amount of polling required. * feat: blocking update for E-Ink Option to wait for display update to complete before proceeding. Important when shutting down the device. * refactor: allow system applets to lock rendering Temporarily prevents other applets from rendering. * feat: boot and shutdown screens * feat: BluetoothStatus Adds a meshtastic::Status object which exposes the state of the Bluetooth connection. Intends to allow decoupling of UI code. * feat: Bluetooth pairing screen * fix: InkHUD defaults not honored * fix: random Bluetooth pin for NicheGraphics UIs * chore: button interrupts tested * fix: emoji reactions show as blank messages * fix: autoshow and notification triggered by outgoing message * feat: save InkHUD data before reboot Implemented with a new Observable. Previously, config and a few recent messages were saved on shutdown. These were lost if the device rebooted, for example when firmware settings were changed by a client. Now, the InkHUD config and recent messages saved on reboot, the same as during an intentional shutdown. * feat: imperial distances Controlled by the config.display.units setting * fix: hide features which are not yet implemented * refactor: faster rendering Previously, only tiles which requested update were re-rendered. Affected tiles had their region blanked before render, pixel by pixel. Benchmarking revealed that it is significantly faster to memset the framebuffer and redraw all tiles. * refactor: tile ownership Tiles and Applets now maintain a reciprocal link, which is enforced by asserts. Less confusing than the old situation, where an applet and a tile may disagree on their relationship. Empty tiles are now identified by a nullptr *Applet, instead of by having the placeholderApplet assigned. * fix: notifications and battery when menu open Do render notifications in front of menu; don't render battery icon in front of menu. * fix: simpler defaults Don't expose new users to multiplexed applets straight away: make them enable the feature for themselves. * fix: Inputs::TwoButton interrupts, when only one button in use * fix: ensure display update is complete when ESP32 enters light sleep Many panels power down automatically, but some require active intervention from us. If light sleep (ESP32) occurs during a display update, these panels could potentially remain powered on, applying voltage the pixels for an extended period of time, and potentially damaging the display. * fix: honor per-variant user tile limit Set as the default value for InkHUD::settings.userTiles.maxCount in nicheGraphics.h * feat: initial InkHUD support for Wireless Paper v1.1 and VM-E213 * refactor: Heard and Recents Applets Tidier code, significant speed boost. Possibly no noticable change in responsiveness, but rendering now spends much less time blocking execution, which is important for correction functioning of the other firmware components. * refactor: use a common pio base config Easier to make any future PlatformIO config changes * feat: tips Show information that we think the user might find helpful. Some info shown first boot only. Other info shown when / if relevant. * fix: text wrapping for '\n' Previously, the newline was honored, but the adojining word was not printed. * Decouple ButtonThread from sleep.cpp Reorganize sleep observables. Don't call ButtonThread methods inside doLightSleep. Instead, handle in class with new lightsleep Observables. * feat: BluetoothStatus Adds a meshtastic::Status object which exposes the state of the Bluetooth connection. Intends to allow decoupling of UI code. * feat: observable for reboot * refactor: Heltec VM-E290 installDefaultConfig * fix: random Bluetooth pin for NicheGraphics UIs * update device-ui: fix touch/crash issue while light sleep * Collect inkhud * fix: InkHUD shouldn't nag about timezone (#6040) * Guard eink drivers w/ MESHTASTIC_INCLUDE_NICHE_GRAPHICS * Case sensitive perhaps? * More case-sensitivity instances * Moar * RTC * Yet another case issue! * Sigh... * MUI: BT programming mode (#6046) * allow BT connection with disabled MUI * Update device-ui --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * MUI: fix nag timeout, disable BT programming mode for native (#6052) * allow BT connection with disabled MUI * Update device-ui * MUI: fix nag timeout default and remove programming mode for native --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * remove debuglog leftover * Wireless Paper: remove stray board_level = extra (#6060) Makes sure the InkHUD version gets build into the release zip * Fixed persistence stragglers from NodeDB / Device State divorce (#6059) * Increase `MAX_THREADS` for InkHUD variants with WiFi (#6064) * Licensed usage compliance (#6047) * Prevent psk and legacy admin channel on licensed mode * Move it * Consolidate warning strings * More holes * Device UI submodule bump * Prevent licensed users from rebroadcasting unlicensed traffic (#6068) * Prevent licensed users from rebroadcasting unlicensed traffic * Added method and enum to make user license status more clear * MUI: move UI initialization out of main.cpp and adding lightsleep observer + mutex (#6078) * added device-ui to lightSleep observers for handling graceful sleep; refactoring main.cpp * bump lib version * Update device-ui * unPhone TFT: include into build, enable SD card, increase PSRAM (#6082) * unPhone-tft: include into build, enable SD card, increase assigned PSRAM * lib update * Backup / migrate pub private keys when upgrading to new files in 2.6 (#6096) * Save a backup of pub/private keys before factory reset * Fix licensed mode warning * Unlock spi on else file doesn't exist * Update device-ui * Update protos and device-ui * [create-pull-request] automated change (#6129) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Proto * [create-pull-request] automated change (#6131) * Proto update for backup * [create-pull-request] automated change (#6133) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Update protobufs * Space * [create-pull-request] automated change (#6144) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Protos * [create-pull-request] automated change (#6152) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Updeet * device-ui lib update * fix channel OK button * device-lib update: fix settings panel -> no scrolling * device-ui lib: last minute update * defined(SENSECAP_INDICATOR) * MUI hot-fix pub/priv keys * MUI hot-fix username dialog * MUI: BT programming mode button * Update protobufs --------- Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com> Co-authored-by: GUVWAF <thijs@havinga.eu> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: Jason Murray <15822260+scruplelesswizard@users.noreply.github.com> Co-authored-by: Jason Murray <jason@chaosaffe.io> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Austin <vidplace7@gmail.com> Co-authored-by: virgil <virgil.wang.cj@gmail.com> Co-authored-by: Mark Trevor Birss <markbirss@gmail.com> Co-authored-by: Kalle Lilja <15094562+ThatKalle@users.noreply.github.com> Co-authored-by: rcarteraz <robert.l.carter2@gmail.com>	2025-03-01 06:18:33 -06:00
Mictronics	598cfcc081	Cast user pref strings. (#6123)	2025-02-27 08:21:03 +08:00
Ben Meadors	1be28520a7	Perhaps fix TXCO reports on pro-micro (#6110) ... * Perhaps fix TXCO reports on pro-micro * Missed one	2025-02-21 08:30:09 +08:00
Manuel	2d42e1b2bc	fix: TCXO_OPTIONAL featuring SenseCAP Indicator (V1/V2) (#5948) ... * fix TCXO_OPTIONAL * fix LOG_WARN * fix lora.begin() returns -707 * trunk fmt	2025-01-27 14:00:12 -06:00
Thomas Göttgens	b353bcc04a	fix detection of lark weather station and add rain sensor (#5874) ... * fix detection of lark weather station * fix unit tests and add support for Dfrobot rain gauge * fix name display on bootup * fix gauge init logic * trunk fmt	2025-01-18 14:10:13 +01:00
Jonathan Bennett	6b1c01ce02	Trunk n stuff (#5833) ... * Trunk * Allow new gpio syntax with defaults * Exit on pin init failure	2025-01-12 15:10:50 -06:00
Patrick Siegl	70296b47bc	Multi gpiochip support for native environment (#5743) ... * For each GPIO PIN, allow to specify gpiochip and line * Added support for LLCC68 in native env. * Removed one if by employing && * Fix for log, as std::string and not const char* * Remove CH341 flag, enabling it for all LoRa chips * Provide a default example --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>	2025-01-12 13:40:25 -06:00
Eric Severance	e7802d960f	Manage when destructor is called for native HttpAPI (#5807)	2025-01-11 06:15:50 -06:00
Tom Fifield	e1aaafb77a	Cherrypick "add more locking for shared SPI devices (#5595) " (#5728) ... * add more locking for shared SPI devices (#5595) * add more locking for shared SPI devices * call initSPI before the lock is used * remove old one * don't double lock * Add missing unlock * More missing unlocks * Add locks to SafeFile, remove from `readcb`, introduce some LockGuards * fix lock in setupSDCard() * pull radiolib trunk with SPI-CS fixes * change ContentHandler to Constructor type locks, where applicable --------- Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: GUVWAF <thijs@havinga.eu> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> * mesh-tab: lower I2C touch frequency --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: GUVWAF <thijs@havinga.eu> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>	2025-01-03 10:05:26 +08:00
Tom Fifield	43d6b31603	TFT branch grab-bag (#5683) ... Selection of minor edits from the TFT branch that are too challenging to cherry-pick cleanly, including: * introducing the HAS_TFT flag * fixing pins in unphone * Adding pinterdevice to portduino settings	2024-12-28 08:31:54 -06:00
Tom Fifield	5fed679d33	Add detection code for INA226 (#5605) ... INA226 is a high accuracy current and voltage sensor.	2024-12-20 19:24:29 -06:00
Jonathan Bennett	960626e498	Ch341 (#5474) ... * Very hacky first attempt at usermod ech341 * Fixes and debug printfs * Move to library version of libpinedio-usb * Add spidev: ch341 option in meshtasticd config.yaml * Only check settingsStrings on native * Use new CH341 code * Bump ch341 lib * Cleanup USBHal * Add ch341 config.d files * Remove ch341quirk * Bump to most recent spi-userspace driver * Add handling for ch341 serial, pid, and vid * Minor fixes from pio check * Trunk * Add include for musl compliance * Point to upstream libch341	2024-12-20 17:34:02 -06:00
Lewis He	63091b7838	[T-Deck] Fixed the issue that some devices may experience low voltage reset due to excessive startup current (#5607) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-12-19 06:21:54 -06:00
Tom Fifield	03770b799f	Synch minor changes from TFT branch (#5520) ... * Synch minor changes from TFT branch Includes: * New nordicnrf52 minor version (10.5.0 --> 10.6.0) * Optimisations for T_DECK * preparation for MESH_TAB * add ext notification module to portduino --------- Co-authored-by: mverch67 <manuel.verch@gmx.de>	2024-12-12 17:42:41 +01:00
Mark Trevor Birss	e4f53677fc	[Add] LR1110, LR1120 and LR1121 to linux native Portduino (#5496) ... * Update main.cpp * Update PortduinoGlue.h * Update PortduinoGlue.cpp * Update PortduinoGlue.cpp * Update PortduinoGlue.cpp * Update main.cpp	2024-12-04 05:39:02 -06:00
GUVWAF	57ea6a265e	SimRadio: clean-up and emulate collisions (#5487) ... * Clean up SimRadio and don't let it use PKC * Add collision emulation for SimRadio * Add stats from SimRadio to LocalStats * Make emulating collisions optional	2024-12-03 06:21:24 -06:00
Ben Meadors	d00e0f6911	Convert userprefs to a json file instead of header file which has to be included everywhere (#5471) ... * WIP * Got string quoting and macro expansion working * Need the placeholder * Cleanup * Missed a user prefs reference * Update jsonc	2024-12-03 06:17:25 -06:00
Ben Meadors	0832388482	Remove ATECC crypto chip placeholder code (#5461)	2024-11-27 09:45:54 +01:00
Ben Meadors	fe86c40145	Cleanup i2c scan logs and macro to save some bytes and remain consistent (#5455) ... * Cleanup i2c scan logs and macro to save some bytes and remain consistent * Functions are better than macros * Exclude i2c scan for STM32 * Useless log	2024-11-26 13:59:50 -06:00
jake-b	932966b896	Support for the ClimateGuard RadSens Geiger-Muller tube (#5425)	2024-11-24 13:53:52 +01:00
Ben Meadors	667b4ef0f2	Exclude some niche modules by default and populate exclude_modules (#5300) ... * Exclude some niche modules by default * Start of intelligently excluding modules --------- Co-authored-by: Tom Fifield <tom@tomfifield.net>	2024-11-10 13:36:49 -06:00
Ben Meadors	982190936d	More log reductions. I'll probably stop now ;-) (#5263)	2024-11-06 21:03:25 +08:00
Ben Meadors	f769c50fa5	More reduction (#5256) ... * Now with even fewer ings * Ye * Mo * QMA6100PSensor	2024-11-04 19:15:59 -06:00
Ben Meadors	50dac38a1b	Pass#2: Lots more savings in logs and string reduction surgery (#5251) ... * Pass#2: Lots more savings in logs and string reduction surgery * Don't need Thread suffix either * Warn	2024-11-04 12:16:25 -06:00