remove newline from logging statements in code. The LOG_* functions will now magically add it at the end.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Uplink DMs not to us if MQTT encryption enabled
* Only really need to try uplinking encrypted packet if MQTT encryption is enabled
* Add log about publishing nothing when packet is not decrypted and encryption_enabled is false
* Improve comment
Recently there have been reports of intermittent difficulties
detecting U-Blox chips. This patch proposes a new approach that should
be more reliable.
Previously we were fighting with NMEA messages to try and send binary
commands. We unusually also tried changing the Baud rate of U-Blox
chips, something we don't do with any other GPS.
It turns out U-Blox has another method to disable NMEA
messages. PUBX,40 is a text-based command, supported on all the
U-Blox versions we care about that can set the rate of NMEA messages
to zero.
This is what we attempt to do with all other GPS and it works quite
well.
So this patch alters the probe code to:
1. Remove UBX binary code to stop NMEA messages
2. Remove code that tries to reset UBX chips to 9600 baud
3. Add UBX proprietary text commands messages to stop the NMEA flood
4. Improve log strings sent to the user.
Tested on Ublox 6, Ublox 9, and Ublox 10 on multiple devices.
Also tested on several devices with
non-Ublox GPS to ensure it does not interfere with their detection
(heltec-wireless-tracker, wio-tracker-wm11110)
@allanmac noted we were not enabling QZSS on the UC6580.
QZSS is an augmentation service that runs on the same frequency
as GPS, so turning it on should not have any impact on usage other
than improving performance for users in the Asia Pacific.
Fixes https://github.com/meshtastic/firmware/issues/5009
* preliminary Othernet Dreamcatcher 2206 Support
Need to adapt to 2301 final version
* second target for latest revision
* preliminary Othernet Dreamcatcher 2206 Support
Need to adapt to 2301 final version
* second target for latest revision
* preliminary Othernet Dreamcatcher 2206 Support
Need to adapt to 2301 final version
* second target for latest revision
* address comments
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
* Adding pico-extra utils
* RP2040 can now go to deepsleep
* First RP2040 DeepSleep code - TODO : do better and restore
* FIX RAK11310 compilation (revert SDK + missing defines)
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add stub health telemetry module
* Add detection for MAX30102 Health Sensor
It lives on I2C bus at 0x57, which conflicts with an existing
sensor. Add code to check the PARTID register for its response 0x15
per spec.
* Add detection for MLX90614
An IR Temperature sensor suitable for livestock monitoring.
* Add libraries for MLX90614 and MAX30102 sensors
* Fix Trunk
* Add support for MLX90614 IR Temperature Sensor
* Add support for MAX30102 (Temperature)
* Make it build - our first HealthTelemetry on the mesh.
If a MAX30102 is connected, its temperature will be sent to the
mesh as HealthTelemetry.
* Add spo2 and heart rate calculations to MAX30102
* Switch MLX90614 to Adafruit library
Sparkfun was having fun with SDA/SCL variables which we can avoid
by switching to this highly similar library.
* Enable HealthTelemetry if MLX90614 detected
* Change MLX90614 emissivity for human skin.
* Add health screen!
* Remove autogenerated file from branch
* Preparing for review
* Fix MeshService master sync from before.
* Prepare for review
* For the americans
* Fix native build
* Fix for devices with no screen
* Remove extra log causing issues
---------
Co-authored-by: Tom Fifield <tom@tomfifield.net>
