835 Commits

Author	SHA1	Message	Date
Thomas Göttgens	ef14967fbf	Crowpanel 2.4,2.8 and 3.5 support (#6355) ... Co-authored-by: mverch67 <manuel.verch@gmx.de>	2025-04-17 16:03:37 +02:00
dylanli	d74359abf0	add support for Seeed solar panel (#6597) ... * add seeed_solar_node * fix RF_SW problem * fix IIC problem * Update Button redefination * Add on-board flash pin defination * fix missing a ',' * update seeed sorlar panel defination * fix word spell * fix upstream change * fix upstream change * fix upstream change * fix formate * Restore the FLASH definition that was deleted by mistake and pull down the CS pin to ensure low power consumption * fix led defination conflict * Delete lib/device-ui directory * Restore protobufs submodule --------- Co-authored-by: WayenWeng <jinyuan.weng@seeed.cc>	2025-04-17 16:11:17 +10:00
Niklas	e0dafc3618	fix: set upload_speed for tlora_v1 (#6601)	2025-04-16 06:15:16 -05:00
Benjamin Kyd	64c8bde04a	Update platformio.ini to exclude unused modules from t1000-e (#6584) ... * Update platformio.ini to exclude unused modules * Add No EXT GPIO flag and also correct some exclusions in main * CANNEDMSG != CANNEDMESSAGES * Remove NO_EXT_GPIO	2025-04-16 10:12:23 +02:00
Niklas	1138f74e2c	fix: set upload_speed for tlora_v1_3 & tlora_v2_1_16 (#6595)	2025-04-15 20:39:13 -05:00
todd-herbert	cf5c8de92e	Fix spurious button presses on some T-Echos (#6590) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-15 20:33:44 -05:00
Tom Fifield	98411d408a	Trunk fixes for heltec mesh pocket. (#6588) ... https://github.com/meshtastic/firmware/pull/6533 was merged without running trunk. This patch fixes the newly introduced trunk errors.	2025-04-15 16:37:09 -05:00
Aaron.Lee	b46aad85cc	Add new hardware: Heltec MeshPocket (#6533) ... * Add Heltec MeshPocket. * MeshPocket source code update * Optimiz code for refresh border during full update. * Update Heltec MeshPocket json file info.	2025-04-15 13:34:30 +10:00
Kevin Jahaziel Leon Morales	7079f538ed	feat: Add Electronic Cats variant for Catsniffer (#6483) ... * feat: Add Electronic Cats variant for catsniffer * fix: Trunk fmt * fix: Variant error	2025-04-11 13:26:30 +02:00
Ken Piper	baa05aacf5	fix: Correct underlying cause of T-Watch not functioning when set to a 16MB filesystem (#6563) ... * Fix maximum flash size in T-Watch S3 board definition * Revert "Fix: T-Watch-S3 has 8MB Flash (#6407)" This reverts commit 769f0623be.	2025-04-11 13:04:37 +02:00
todd-herbert	536b6d87c6	InkHUD support for LilyGo T3S3 E-Paper (#6503) ... * Purge an incomplete E-Ink driver * Use the deep-sleep mode of SSD16XX E-Ink displays * TwoButton doesn't need to store pin mode * Fix false positive button presses after light sleep * E-Ink driver for DEPG0213BNS800 * InkHUD support for LilyGo T3S3 E-paper --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-09 10:41:51 -05:00
Andrik45719	5256ae90dc	DIY v1/v1_1 add TCXO_OPTIONAL make it so that the firmware can try both TCXO and XTAL (#6534) ... * EBYTE_E22 TCXO_OPTIONAL * EBYTE_E22 --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-09 10:40:38 -05:00
Thomas Göttgens	fc3d9f2a15	fix power pin definition	2025-04-09 14:55:23 +02:00
Mark Trevor Birss	e2933bcb5b	Update platformio.ini (#6512)	2025-04-07 07:04:31 -05:00
Thomas Göttgens	606abfc116	Fix several features of M1 and M2 (i know what the 7 is now ...) (#6507) ... * Fix several features of M1 and M2 (i know what the 7 is now ...) * 'THe' should be 'The'. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * remove floating definition --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-07 05:46:22 -05:00
Nasimovy	2125c03974	Fix for PSRAM detection on ESP32-S3R8 and t-beam (#6504) ... * remove duplicate HAS_LP5562 introduced by #6422 * T190 PSRAM fix * all the boards with a ESP32-S3R8 * T-beam V1.1 PSRAM	2025-04-06 20:27:46 -05:00
Manuel	ea4ce8d827	MUI unPhone-tft: fix defaults (#6477)	2025-04-01 08:53:15 -05:00
todd-herbert	ae88759059	draft an InkHUD variant for Elecrow Thinknode M1 (#6473) ... Only an initial guess. No hardware here yet for testing. Button assignments are largely placeholder. Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-31 19:08:23 -05:00
todd-herbert	886bffe8f3	fix: honor user button customization (#6400) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-31 06:03:44 -05:00
todd-herbert	bd2d2981c9	Add InkHUD driver for WeAct Studio 4.2" display module (#6384) ... * chore: todo.txt * chore: InkHUD documentation Word salad for maintainers * refactor: don't init system applets using onActivate System applets cannot be deactivated, so we will avoid using onActivate / onDeactivate methods entirely. * chore: update the example applets * fix: SSD16XX reset pulse Allow time for controller IC to wake. Aligns with manufacturer's suggestions. T-Echo button timing adjusted to prevent bouncing as a result(?) of slightly faster refreshes. * fix: allow timeout if display update fails Result is not graceful, but avoids total display lockup requiring power cycle. Typical cause of failure is poor wiring / power supply. * fix: improve display health on shutdown Two extra full refreshes, masquerading as a "shutting down" screen. One is drawn white-on-black, to really shake the pixels up. * feat: driver for display HINK_E042A87 As of Feb. 2025, these panels are used for "WeActStudio 4.2in B&W" display modules. * fix: inkhud rotation should default to 0 * Revert "chore: todo.txt" This reverts commit bea7df44a7. * fix: more generous timeout for display updates Previously this was tied to the expected duration of the update, but this didn't account for any delay if our polling thread got held up by an unrelated firmware task. * fix: don't use the full shutdown screen during reboot * fix: cooldown period during the display shutdown display sequence Observed to prevent border pixels from being locked in place with some residual charge?	2025-03-31 09:17:24 +02:00
Andrew Yong	95523a9659	Fix: Update xiao_ble E22-900M30S regulatory gain to 7 dB (#6466) ... Allow 3 dBm increase in power from previous value of 10 dB gain, based on actual measurements from https://github.com/S5NC/EBYTE_ESP32-S3/blob/main/E22-900M30S%20power%20output%20testing.txt Signed-off-by: Andrew Yong <me@ndoo.sg>	2025-03-30 19:21:47 -05:00
Thomas Göttgens	ea9485657e	Speed up builds by referencing github zips for shallow checkouts (#6441) ... * Speed up builds by referencing github zips for shallow checkouts * sadly the zips don't include submodules OR submodule metadata	2025-03-29 06:19:05 -05:00
Thomas Göttgens	6c7c0770f9	add ThinkNode M2 Support (#6354) ... * [WIP] Base firmware pending support for 2nd button * Update button behaviour. Still WIP * [WIP] Base firmware pending support for 2nd button * Update button behaviour. Still WIP * change env to lowercase Co-authored-by: rcarteraz <robert.l.carter2@gmail.com> * yea - well - what else is new? * fix secondary button behavior and update trunk --------- Co-authored-by: rcarteraz <robert.l.carter2@gmail.com>	2025-03-28 19:55:00 -05:00
Thomas Göttgens	4a12b4eb32	add Thinknode-M1 (#6435) ... * ThinkNode M1 * Update Epaper Driver * Your day isn't complete unless trunk has complained about your formatting at least once.	2025-03-28 21:22:17 +01:00
Manuel	a2387c79ee	fix: SenseCAP Indicator sporadic touch crash (#6432) ... * fix indicator touch crash * replace wrong .ini * delete wrong .ini	2025-03-28 10:18:47 -05:00
Austin	769f0623be	Fix: T-Watch-S3 has 8MB Flash (#6407)	2025-03-27 07:46:16 -05:00
Mark Trevor Birss	6c17694b64	CrowPanel e-Ink Updates for 4.2 and 2.9 inch (#6401) ... * Update platformio.ini * Update EInkDisplay2.cpp * Update EInkDisplay2.h	2025-03-27 11:06:41 +02:00
nledevil	53a7afff41	Adding Variants for Hackerboxes ESP32C3 OLED kit and the ESP32 IO Kit (#6319)	2025-03-25 22:57:06 +01:00
Manuel	e9d8a3d7f9	MUI: increase stack, cache and drawbuffer (#6389) ... * increase stack, cache and drawbuffer * bump device-ui lib * T-Deck map: switch to full redraw	2025-03-24 19:30:17 -05:00
Thomas Göttgens	0951fdd49b	Add support for Heltec HRI-3621 industrial sensor hub (#6366)	2025-03-21 16:12:49 +01:00
Thomas Göttgens	848a3ed6a1	implement littlefs for stm32 (#5987) ... Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Daniel Peter Chokola <dan.chokola@gmail.com> Co-authored-by: Mark Trevor Birss <markbirss@gmail.com> Co-authored-by: Austin <vidplace7@gmail.com>	2025-03-21 16:12:27 +01:00
Austin	46235f6f8b	RP2xx0: Add UDP Multicast support (#6327)	2025-03-20 08:49:28 -05:00
Austin	6673cb9292	Increase MAX_NUM_NODES on high-flash ESP32_S3 (#6311)	2025-03-18 20:19:51 -05:00
Thomas Göttgens	2d565c2921	trunk'd	2025-03-16 16:18:12 +01:00
dylanli	64b9cfe199	update seeed-xiao-nrf52840-kit board defination (#6318) ... - Due to the lack of pins, we have temporarily removed the button. There are some technical solutions that can solve this problem, and we are currently exploring and researching them	2025-03-16 16:04:24 +01:00
Thomas Göttgens	1640fb105d	new device: Lilygo T-Eth-Elite (#6321)	2025-03-15 14:15:35 +01:00
Thomas Göttgens	79233fe99d	mainline tlora v3 (#6322)	2025-03-15 11:30:58 +01:00
Mark Trevor Birss	e9effb9fff	Update platformio.ini (#6286)	2025-03-11 15:45:20 +02:00
Mark Trevor Birss	cb6dfb66d2	Update ME25LS01/MS24SF1 comment out upload port (#6285) ... * Update platformio.ini * Update platformio.ini * Update platformio.ini	2025-03-11 14:56:12 +02:00
Manuel	7c3eddebc2	device-ui: exFat support (#6279)	2025-03-10 16:42:29 -05:00
Austin	16a0dce83c	Ebyte E77 (STM32) DevKit support (#6255)	2025-03-07 17:37:54 -06:00
Mark Trevor Birss	60e46cd765	Update platformio.ini (#6245)	2025-03-07 14:21:06 +08:00
Mark Trevor Birss	f6a9e7d741	Add initial support for CrowPanel ESP32 5.79” E-paper HMI (#6233)	2025-03-06 11:28:43 +01:00
todd-herbert	e6a98b1d6b	InkHUD refactoring (#6216) ... * chore: todo.txt * chore: comments * fix: no fast refresh on VME290 Reverts a line of code which was accidentally committed * refactor: god class Divide the behavior from the old WindowManager class into several subclasses which each have a clear role. * refactor: cppcheck medium warnings Enough to pass github CI for now * refactor: updateType selection * refactor: don't use a setter for the shared AppletFonts * fix: update prioritization forceUpdate calls weren't being prioritized * refactor: remove unhelpful logging getTimeString is used for parsing our own time, but also the timestamps of messages. The "one time only" log printing will likely fire in unhelpful situations. * fix: " " * refactor: get rid of types.h file for enums * Keep that sneaky todo file out of commits	2025-03-06 11:25:41 +01:00
Ben Meadors	6c8058e1d8	Update SEEED_XIAO_NRF52840_KIT (#6239)	2025-03-06 09:44:22 +08:00
dylanli	445efe9e21	Add support for seeed_xiao_nrf52840_kit (#6231) ... * add support for seeed_xiao_nrf52840_kit * Update platformio.ini remove board level define	2025-03-05 16:22:25 -06:00
Austin	b96b027926	Consume device-ui as a pio library (#6193)	2025-03-05 16:19:59 -06:00
Mictronics	f0f2cd0e0e	RAK11310 Fix build with latest Arduino framework (#6227)	2025-03-04 21:39:10 +01:00
Matt Andreko	fdbadc992c	Enable GPS functionality for RAK4631_eth_gw variant (#6229)	2025-03-04 21:27:57 +01:00
Thomas Göttgens	6715662281	don't build the niche* stuff for non-inkHUD builds. (#6217)	2025-03-03 09:10:47 -06:00