* Update Favorite Node Message Options to unify against other screens
* Rebuild Horizontal Battery, Resolve overlap concerns
* Update positioning on Message frame and fix drawCommonHeader overlay
* Beginnings of creating isHighResolution bool
* Fixup determineResolution()
* Implement isHighResolution in place of SCREEN_WIDTH > 128 checks
* Line Spacing bound to isHighResolution
* Analog Clock for all
* Add AM/PM to Analog Clock if isHighResolution and not TWatch
* Simple Menu Queue, and add time menu
* Fix prompt string for 12/24 hour picker
* More menu banners into functions
* Fix Action Menu on Home frame
* Correct pop-up calculation size and continue to leverage isHighResolution
* Move menu bits to MenuHandler
* Plumb in the digital/analog picker
* Correct Clock Face Picker title
* Clock picker fixes
* Migrate the rest of the menus to MenuHandler.*
* Add compass menu and needle point option
* Minor fix for compass point menu
* Correct Home menu into typical format
* Fix emoji bounce, overlap, and missing commonHeader
* Sanitize long_names and removed unused variables
* Slightly better sanitizeString variation
* Resolved apostrophe being shown as upside down question mark
* Gotta keep height and width in expected order
* Remove Second Hand for Analog Clock on EInk displays
* Fix Clock menu option decision tree
* Improvements to Eink Navigation
* Pause Banner for Eink moved to bottom
* Updated working for 12-/24-hour menu and Added US/Arizona to timezone picker
* Add Adhoc Ping and resolve error with std::string sanitized
* Hide quick toggle as option is available within Action Menu, commented out for the moment
* Remove old battery icon and option, use drawCommonHeader throughout, re-add battery to Clock frames
* fix misc build warnings. NFC
* Update Analog Clock on EInk to show more digits
* Establish Action Menu on all node list screens, add NodeDB reset (with confirmation) option
* Add Toggle Backlight for EInk Displays
* Suppress action screen Full refresh for Eink
* Adjust drawBluetoothConnectedIcon on TWatch
* Maintain clock frame when switching between Clock Faces
* Move modules beyond the clock in navigation
* addressed the conflicts, and changed target branch to 2.7-MiscFixes-Week1
* cleanup, cheers
* Add AM/PM to low resolution clock also
* Small adjustments to AM/PM replacement across various devices
* Resolve dangling pointer issues with sanitize code
* Update comments for Screen.cpp related to module load change
* Trunk runs
* Update message caching to correct aged timestamp
* Menu wording adjustments
* Time Format wording
* Use all the rows on EInk since with autohide the navigation bar
* Finalize Time Format picker word change
* Retired drawFunctionOverlay code
No longer being used
* Actually honor the points-north setting
* Trunk
* Compressed action list
* Update no-op showOverlayBanner function
* trunk
* Correct T_Watch_S3 specific line
* Autosized Action menu per screen
* Finalize Autosized Action menu per screen
* Unify Message Titles
* Reorder Timezones to match expectations
* Adjust text location for pop-ups
* Revert "Actually honor the points-north setting"
This reverts commit 20988aa4fa.
* Make NodeDB sort its internal vector when lastheard is updated. Don't sort in NodeListRenderer
* Update src/graphics/draw/NodeListRenderer.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/mesh/NodeDB.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Pass by reference -- Thanks Copilot!
* Throttle sorting just a touch
* Check more carefully for own node
* Eliminate some now-unneeded sorting
* Move function after include
* Putting Modules back to position 0 and some trunk checks found
* Add Scrollbar for Action menus
* Second attempt to move modules down the navigation bar
* Continue effort of moving modules in the navigation
* Canned Messages tweak
* Replicate Function + Space through the Menu System
* Move init button parameters into config struct (#7145)
* Remove bundling of web-ui from ESP32 devices (#7143)
* Fixed triple click GPS toggle bungle
* Move init button parameters into config struct
* Reapply "Actually honor the points-north setting"
This reverts commit 42c1967e7b.
* Actually do compass pointings correctly
* Tweak to node bearings
* Menu wording tweaks
* Get the compass_north_top logic right
* Don't jump frames after setting Compass
* Get rid of the extra bearingTo functions
* Don't blink Mail on EInk Clock Screens
* Actually set lat and long
* Calibrate
* Convert Radians to Degrees
* More degree vs radians fixes
* De-duplicate draw arrow function
* Don't advertise compass calibration without an accell thread.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: csrutil <keming.cao@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* [WIP] Add RAK12035VB Soil Moisture Sensor support
Introduce the RAK12035 sensor as an environmental telemetry sensor,
including necessary calibration checks and default values. Update
relevant files to integrate the sensor into the existing telemetry system.
This hardware is not just one module, but a couple.. RAK12023 and
RAK12035 is the component stack, the RAK12023 does not seem to matter
much and allows for multiple RAK12035 devices to be used.
Co-Authored-By: @Justin-Mann
* [WIP] Add RAK12035VB Soil Moisture Sensor support
Introduce the RAK12035 sensor as an environmental telemetry sensor,
including necessary calibration checks and default values. Update
relevant files to integrate the sensor into the existing telemetry system.
This hardware is not just one module, but a couple.. RAK12023 and
RAK12035 is the component stack, the RAK12023 does not seem to matter
much and allows for multiple RAK12035 devices to be used.
Co-Authored-By: @Justin-Mann
* [WIP] Add RAK12035VB Soil Moisture Sensor support
Introduce the RAK12035 sensor as an environmental telemetry sensor,
including necessary calibration checks and default values. Update
relevant files to integrate the sensor into the existing telemetry system.
This hardware is not just one module, but a couple.. RAK12023 and
RAK12035 is the component stack, the RAK12023 does not seem to matter
much and allows for multiple RAK12035 devices to be used.
Co-Authored-By: @Justin-Mann
* [WIP] Add RAK12035VB Soil Moisture Sensor support
Introduce the RAK12035 sensor as an environmental telemetry sensor,
including necessary calibration checks and default values. Update
relevant files to integrate the sensor into the existing telemetry system.
This hardware is not just one module, but a couple.. RAK12023 and
RAK12035 is the component stack, the RAK12023 does not seem to matter
much and allows for multiple RAK12035 devices to be used.
Co-Authored-By: @Justin-Mann
* Update to 1.0.4 release of RAK12035_SoilMoisture
* cleanup
* cool
* .
* ..
* little bit of cleanup and recompile/upload/test on RAK WISBLAOCK STACK: RAK19007/RAK4631/RAK12035VB/RAK12500
looks like soil monitor is working correctly, new environmental metrics are comming thru [new protos soil_moisture, soil_temperature] and GPS is working again with the RAK 12500.
improvements could be made around the configuration of the monitor.
next steps include updating the client(s) to react to, log and display the new proto metrics for soil temp and humidity.
* . comments about current limitations and TODOs
* trunk update
* trying to autoformat..
* fix formatting attempt 2
* ..
* ...
* ...
* .
* some corrections and local build success
* correction in temp code
* grr formatting
* cleanup after a few experiments
* remove temp code to overwrite values for temp and humidity protos.. next step just update the clients to know about soil_temperature and soil_humidity protos.
* update some values in varient for rak wistap
* working out trunk formatting..
* wip
. corrections to other build variants
* .
* protobuffs?
* protobufs?
* Update protobufs ref
* Protobufs ref
* Trunk
* Update RAK12035Sensor.cpp
* Fmt
* comment changes
* dumb mistakes... resolved, actually built and tested.. all good..
* Update src/modules/Telemetry/Sensor/RAK12035Sensor.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/modules/Telemetry/Sensor/RAK12035Sensor.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* . proto submod
* proto
* proto
* merge master
* mabe a fix for GPS pin conflict, waiting on a new gps module to try
* merge master, attempt to fix gps (RAK12500) pin conflict with RAK12023/12035
* .
* .
---------
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* support manually shutting off power to the PMSA003I sensor when we aren't doing a telemetry reading
* add comment about PMSA003I_WARMUP_MS to AirQualityTelemetry.cpp
* fix typos, use arduino gpio defines instead of magic numbers
* support manually shutting off power to the PMSA003I sensor when we aren't doing a telemetry reading
* add comment about PMSA003I_WARMUP_MS to AirQualityTelemetry.cpp
* fix typos, use arduino gpio defines instead of magic numbers
* RAK4631: add PMSA003I_ENABLE_PIN define
* fix indentation
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
- Changed library from deprecated arduino SD library to wrapper of SdFat library
- Fixed some bugs in the S&F code for SD card storage
Now the S&F functionality works on nrf52 (tested on rak4631 with RAK15002)
* First attempt to adding hardware support for NRF52 SPI SD Card using arduino SD library
My first time contributing to an open source project so not very confident in what i'm doing.
Changes to
FSCommon:
initializing SD library for NRF52. Progress: No compile error, but SD card does not get initialized properly yet
added ifdef ARCH_ESP32 conditions around esp32 SD library functions
memget: added ifdef conditional statements
StoreForwardModule.cpp: added ifdef conditional statements
Rak4631 platfromIO.ini and variant.h:
added arduino-libraries/SD@^1.3.0 library to libdeps
defined HAS_SDCARD and SPI pins
Arduino SD library. Made changes to library because using namespace SDLIB in header file caused ambiguity problems
Not sure this is the right way of adding a library, also, how do i implement changes to the library permanently to the project?
Am I going somewhat in the right direction with these changes? Tell me your thoughts, thanks
* replaced arduino SD library to custom fork.
A "using namespace" statement in the header file was to messy to work around.
NRF52 SD card initialisation added
* updated library reference
added card size and type function to SD library
added populateSDCard for NRF52
* Changed NRF52 SD object from SDFilesystem to SD
Changed NRF52 SD object from SDFilesystem to SD for more compatibility with esp32 SD library. Some functions are still different but most used open, read, write and close are the same.
* Removed duplicate ESP32/NRF52 SD card access code
Mainly made changes to the custom arduino SD library to make it compatible with the esp32 SD library already used in the store and forward code.
With these compatible function names and return, I removed some duplicate code.
* trunk fmt and pin SD library to commit hash
* print this out on ESP32 anyway
---------
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
* Refactor EInkDisplay
A lot of variant specific code is merged, with the macros pushed to the respective variant.h files.
"Dynamic Partial" code has been purged, pending a rewrite.
* fix: declare class only if USE_EINK, init all members
* refactor: move macros to platformio.ini
Responds to https://github.com/meshtastic/firmware/pull/3299#issuecomment-1966425926
* fix: EInkDisplay::connect() references old macros
Usage was in a block of variant-specific code, which had been intentionally left untouched.
* fix: remove duplicate macros from variant.h
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Isolate esp32 adc logic gymnastics, try simplifying getBattVoltage
* Set sense resolution for pico platforms
* try silencing cppcheck when variant has no battery pin
* ADC channel for esp-idf calibration
* Missed an rp2040 device
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add support for the rak10701 board, no touch
* Moved tftblack fillin and changed teh src flags
* Added rak10701 to platformio.ini
* Add USB detection to RAK4631 units.
* Eliminate spurious symbol in comment field.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Initial support for MonteOps's fixed hardware platform
* Update platformio env config + cleanup
* Fix platformio build
* Fix platformio build
* Fix wrong definition logic for NCP5623
* Fix another wrong definition logic for NCP5623, it's not board feature
* Fix wrong definition logic for NCP5623 in External Notification code, it's not board feature
* We need for CI magic here
* Another fix related to NCP5623
* Fix cosmetic issue with redifined variable
* Fix typo
* Cleanup and update defs for HW1
* Fix OEM RAK4631
* Fix AQ sensor reading
* Fix AQ sensor reading (better variant)
* Fix build for other nRF52 devices
* Replace HAS_EINK_RAK to RAK_4631
* lay groundwork for a possible future architecture
* switch from feature opt-out to feature opt-in
* lay groundwork for a possible future architecture
* switch from feature opt-out to feature opt-in
* fix USE_RTC in variant.h for rak4631_epaper and t-echo
* ensure Screen.h is not included without configuration.h
Co-authored-by: Peter Lawrence <12226419+majbthrd@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* First steps to unify GPS Lib for RAK 1910 and RAK 12500
* Technicalities. Out with the old and build the new.
* Adapt Matrix
* We use 0.4.5 now
* While we're at it, yank the RAK815, it's EOL
* Satisfy CI - for now
* - yank UBX library, talk to GPS chip with NMEA only.
- more autodetect going on, this time for the Eink Display.
TODO: actually do something with the scan findings.
* i swear this works on windows! :-)
* these are only there to make CI happy
* don't update eink display if not detected.
* Replace Oberon Crypt Library with modified Adafruit Library. This elimintaes the need for the sdk-nfxlib submodule.
* - Revert auto screen selection (incomplete)
- Revert nrF crypto engine (needs more work)
- add separate defines for not-auto-selecting screen lib.
* Define 2 new variants for RAK - with or without epaper
* Update variants
Co-authored-by: Sacha Weatherstone <sachaw100@hotmail.com>
Co-authored-by: Ben Meadors <thebentern@tuta.io>
