5692 Commits

Author	SHA1	Message	Date
Chloe Bethel	0952007805	Make ExternalNotification show up in excluded_modules, more STM32 modules (#7797) ... * Show ExternalNotification as excluded if it is * Enable ExternalNotification, SerialModule and RangeTest on STM32WL * Misc fixes for #7797 - ARCH_STM32 -> ARCH_STM32WL, use less flash by dropping weather station support for serialmodule, set tx/rx pins before begin * Enable Serial1 on RAK3172, make SerialModule use it (console is on LPUART1) * Fix SerialModule on RAK3172, fix board definition of RAK3172 to include the right pin mapping.	2025-09-02 07:08:57 -05:00
Tom Fifield	3040e5a7bb	Fix GPS that hard code 2080 as the start time. (#7803) ... * Fix GPS that hard code 2080 as the start time. Some GPS chips, such as the AG3335 in T1000e and L96 have a hardcoded time of 2080-01-05 when they start up. To fix that in a way that seems permanent, let's ignore times that are more than 40 years since the firmware was built. We should followup in late 2039 to see if any changes are needed. Reported-By: @b8b8 * Update src/gps/RTC.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Put FORTY_YEARS in header and use in both places. * Restore Ben's nicer log lines. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-09-02 06:41:26 -05:00
Tom Fifield	7612799ef6	Fix GPS that hard code 2080 as the start time. (#7803) ... * Fix GPS that hard code 2080 as the start time. Some GPS chips, such as the AG3335 in T1000e and L96 have a hardcoded time of 2080-01-05 when they start up. To fix that in a way that seems permanent, let's ignore times that are more than 40 years since the firmware was built. We should followup in late 2039 to see if any changes are needed. Reported-By: @b8b8 * Update src/gps/RTC.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Put FORTY_YEARS in header and use in both places. * Restore Ben's nicer log lines. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-09-02 06:40:59 -05:00
Tom Fifield	a6b8202cd4	Hold for 20s after GPS lock (#7801) ... * Hold for >20s after GPS lock GPS chips are designed to stay locked for a while to download some data and save it. This data is important for speeding up future locks, and making them higher quality. Our present configuration could make every lock perform similar to first lock. This patch sets a hold of between 20s and 10% of the lock search time after lock is acquired. This should allow the GPS to finish its work before we turn it off. Fixes https://github.com/meshtastic/firmware/issues/7466 * Remove T1000E-specific GPS holds The new code does the same thing, for all devices. * Fix publishing settings * Cleanups, removing unused variables. * ifdef log line with GPS_DEBUG * fixQual is not a bool.	2025-09-02 06:06:06 -05:00
Jason P	cfc1bf10c9	If usePreset is False, show value as Custom (#7812)	2025-09-02 06:05:55 -05:00
Tom Fifield	c5fad6cca1	Hold for 20s after GPS lock (#7801) ... * Hold for >20s after GPS lock GPS chips are designed to stay locked for a while to download some data and save it. This data is important for speeding up future locks, and making them higher quality. Our present configuration could make every lock perform similar to first lock. This patch sets a hold of between 20s and 10% of the lock search time after lock is acquired. This should allow the GPS to finish its work before we turn it off. Fixes https://github.com/meshtastic/firmware/issues/7466 * Remove T1000E-specific GPS holds The new code does the same thing, for all devices. * Fix publishing settings * Cleanups, removing unused variables. * ifdef log line with GPS_DEBUG * fixQual is not a bool.	2025-09-02 06:05:14 -05:00
Jason P	b8d7222423	If usePreset is False, show value as Custom (#7812)	2025-09-02 05:55:57 -05:00
Manuel	d66665b96e	fix: T-LoRa Pager / T-Deck Pro shutdown (#7792) ... * power down during LS and shutdown * fix T-Deck Pro shutdown * use device specific define * slightly rephrase the power off display message	2025-09-02 14:31:41 +10:00
Jonathan Bennett	bd3cbfc1ad	Add support for the RV-3028 on native Linux (#7802)	2025-09-01 08:04:04 -05:00
Manuel	6b94c297b9	fix: T-LoRa Pager / T-Deck Pro shutdown (#7792) ... * power down during LS and shutdown * fix T-Deck Pro shutdown * use device specific define * slightly rephrase the power off display message	2025-09-01 07:57:49 -05:00
Jonathan Bennett	ca79760372	Add support for the RV-3028 on native Linux (#7802)	2025-08-31 21:08:58 -05:00
Ben Meadors	a0e14439cb	Merge pull request #7785 from meshtastic/master ... Backmerge	2025-08-29 13:59:19 -05:00
Tom Fifield	11db6d4dcc	Can't trust RTCs to tell the time. (#7779) ... Further to https://github.com/meshtastic/firmware/pull/7772 , we discovered that some RTCs have hard-coded start times well in the past. This patch gives RTCs the same treatment as GPS - if the time is earlier than BUILD_EPOCH, we don't use it. Fixes #7771 Fixes #7750	2025-08-29 13:23:14 -05:00
Tom Fifield	10c6836263	Can't trust RTCs to tell the time. (#7779) ... Further to https://github.com/meshtastic/firmware/pull/7772 , we discovered that some RTCs have hard-coded start times well in the past. This patch gives RTCs the same treatment as GPS - if the time is earlier than BUILD_EPOCH, we don't use it. Fixes #7771 Fixes #7750	2025-08-29 13:22:23 -05:00
Ben Meadors	4e03df5ea7	Fix freetext hang (#7781) ... * Fixed freetext hangs by adding canned modules back to self-sourced packets and transition to SENDING_ACTIVE state * Update meshmodule handling	2025-08-29 12:09:22 -05:00
Ben Meadors	9b41131af8	Backmerge (#7782) ... * Merge pull request #7777 from meshtastic/create-pull-request/bump-version Bump release version * Only send Neighbours if we have some to send. (#7493) * Only send Neighbours if we have some to send. The original intent of NeighborInfo was that when a NeighbourInfo was sent all of the nodes that saw it would reply with NeighbourInfo. So, NeighbourInfo was sent even if there were no hop-zero nodes in the NodeDB. Since 2023, when this was implemented, our understanding of running city-wide meshes has improved substantially. We have taken steps to reduce the impact of NeighborInfo over LoRa. This change aligns with those ideas: we will now only send NeighborInfo if we have some neighbors to contribute. The impact of this change is that a node must first see another directly connected node in another packet type before NeighborInfo is sent. This means that a node with no neighbors is no longer able to trigger other nodes to broadcast NeighborInfo. It will, however, receive the regular periodic broadcast of NeighborInfo, and will be able to send NeighborInfo if it has at least 1 neighbor. * Include all the things * AvOid memleak * We don't gotTime if time is 2019. (#7772) There are certain GPS chips that have a hard-coded time in firmware that they will return before lock. We set our own hard-coded time, BUILD_EPOCH, that should be newer and use the comparison to not set a bad time. In https://github.com/meshtastic/firmware/pull/7261 we introduced the RTCSetResult and improved it in https://github.com/meshtastic/firmware/pull/7375 . However, the original try-fix left logic in GPS.cpp that could still result in broadcasting the bad time. Further, as part of our fix we cleared the GPS buffer if we didn't get a good time. The mesh was hurting at the time, so this was a reasonable approach. However, given time tends to come in when we're trying to get early lock, this had the potential side effect of throwing away valuable information to get position lock. This change reverses the clearBuffer and changes the logic so if time is not set it will not be broadcast. Fixes https://github.com/meshtastic/firmware/issues/7771 Fixes https://github.com/meshtastic/firmware/issues/7750 --------- Co-authored-by: Tom Fifield <tom@tomfifield.net>	2025-08-29 10:31:55 -05:00
Wilson	fb34dac08d	Add On-Screen Keyboard for UpDown Encoder and Rotary Encoder. (#7762) ... * Add On-Screen Keyboard for UpDownInterrupt. Pls notice the new keyboard layout was inspired and adviced by https://github.com/csrutil * Add longPress event for RotaryEncoder Press. * Update UpdownInterrupt UP and DOWN on main UI. * Change the interrupt trigger mode from rising edge to falling edge to improve button response.	2025-08-29 23:26:27 +08:00
Tom Fifield	d3e3a91096	We don't gotTime if time is 2019. (#7772) ... There are certain GPS chips that have a hard-coded time in firmware that they will return before lock. We set our own hard-coded time, BUILD_EPOCH, that should be newer and use the comparison to not set a bad time. In https://github.com/meshtastic/firmware/pull/7261 we introduced the RTCSetResult and improved it in https://github.com/meshtastic/firmware/pull/7375 . However, the original try-fix left logic in GPS.cpp that could still result in broadcasting the bad time. Further, as part of our fix we cleared the GPS buffer if we didn't get a good time. The mesh was hurting at the time, so this was a reasonable approach. However, given time tends to come in when we're trying to get early lock, this had the potential side effect of throwing away valuable information to get position lock. This change reverses the clearBuffer and changes the logic so if time is not set it will not be broadcast. Fixes https://github.com/meshtastic/firmware/issues/7771 Fixes https://github.com/meshtastic/firmware/issues/7750	2025-08-29 09:09:13 -05:00
Tom Fifield	5f8503c62d	We don't gotTime if time is 2019. (#7772) ... There are certain GPS chips that have a hard-coded time in firmware that they will return before lock. We set our own hard-coded time, BUILD_EPOCH, that should be newer and use the comparison to not set a bad time. In https://github.com/meshtastic/firmware/pull/7261 we introduced the RTCSetResult and improved it in https://github.com/meshtastic/firmware/pull/7375 . However, the original try-fix left logic in GPS.cpp that could still result in broadcasting the bad time. Further, as part of our fix we cleared the GPS buffer if we didn't get a good time. The mesh was hurting at the time, so this was a reasonable approach. However, given time tends to come in when we're trying to get early lock, this had the potential side effect of throwing away valuable information to get position lock. This change reverses the clearBuffer and changes the logic so if time is not set it will not be broadcast. Fixes https://github.com/meshtastic/firmware/issues/7771 Fixes https://github.com/meshtastic/firmware/issues/7750	2025-08-29 09:08:33 -05:00
Tom Fifield	b0e8321514	Only send Neighbours if we have some to send. (#7493) ... * Only send Neighbours if we have some to send. The original intent of NeighborInfo was that when a NeighbourInfo was sent all of the nodes that saw it would reply with NeighbourInfo. So, NeighbourInfo was sent even if there were no hop-zero nodes in the NodeDB. Since 2023, when this was implemented, our understanding of running city-wide meshes has improved substantially. We have taken steps to reduce the impact of NeighborInfo over LoRa. This change aligns with those ideas: we will now only send NeighborInfo if we have some neighbors to contribute. The impact of this change is that a node must first see another directly connected node in another packet type before NeighborInfo is sent. This means that a node with no neighbors is no longer able to trigger other nodes to broadcast NeighborInfo. It will, however, receive the regular periodic broadcast of NeighborInfo, and will be able to send NeighborInfo if it has at least 1 neighbor. * Include all the things * AvOid memleak	2025-08-28 18:45:46 -05:00
Jason P	dd2f77ea0c	BaseUI Show/Hide Frame Functionality (#7382) ... * Rename System Frame (from Memory) in code base * Create menu options to Show/Hide frames: Node Lists, Bearings, Position, LoRa, Clock and Favorites frames * Move Region Picker into submenu * Tweak wording for Send Position vs Node Info if the device has GPS	2025-08-28 11:23:24 -05:00
Ben Meadors	8685436cbb	Merge pull request #7773 from meshtastic/master ... Backmerge	2025-08-27 20:53:55 -05:00
Ben Meadors	834c3c5cc2	Add this back in	2025-08-27 16:24:57 -05:00
Ben Meadors	237b8908f7	Chainsaw took too much off the top	2025-08-27 09:54:39 -05:00
Ben Meadors	06bccef462	Reinstitute previous streamapi readStream	2025-08-27 07:17:46 -05:00
Ben Meadors	3120bb8fd7	Fix check	2025-08-27 06:50:53 -05:00
Ben Meadors	0903ed8232	Mesh solar integrate (#7764) ... * Added HELTEC MeshSolar board. (#7499) * Added HELTEC MeshSolar board. * Set emergency shutdown pin as high impedance * Set emergency shutdown pin as high impedance Set emergency shutdown pin as high impedance * Update variants/nrf52840/heltec_mesh_solar/variant.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update variants/nrf52840/heltec_mesh_solar/variant.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update variants/nrf52840/heltec_mesh_solar/variant.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update I2C SCL pin definition in variant.h --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Updates --------- Co-authored-by: Quency-D <55523105+Quency-D@users.noreply.github.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-08-27 06:02:54 -05:00
Ben Meadors	f8ba392a24	Add BaseUI support for L1 EInk (#7751) ... * Add BaseUI support for L1 EInk * Fix Eink offset * Add joystick * Updates * Adjust Seeed Wio Tracker L1 E-Ink variant (#7326) * Rename variant Needs the -inkhud suffix to work correctly with the web flasher * Display driver for ZJY122250_0213BAAMFGN * Remove dead code from nicheGraphics.h Remnants of T-Echo's nicheGraphics.h file, which was used as a template. * Use ZJY122250_0213BAAMFGN driver Improves display health. We don't need as many full refreshes now. * Tidying * board_check = true --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Consolidation * Add hack for existing InkHUD button functionality --------- Co-authored-by: todd-herbert <herbert.todd@gmail.com>	2025-08-26 20:29:11 -05:00
Ben Meadors	3dd384dd53	Null check	2025-08-26 19:45:26 -05:00
Jonathan Bennett	2c071a3283	Don't use pin 0 on RAK for input (#7755) ... * Don't use pin 0 on RAK for input * Use boolean instead of define --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-26 13:41:33 -05:00
Manuel	3f5c30e3b3	T-Lora Pager (#7613) ... * initial commit * preset rotary1 encoder * define TAB+ESC * haptic feedback * allow switch off haptic feedback * enable audio amplifier * include PR4684 * fix for tft target * add ES8311 audio codec * fix KB scan duplicate * display workaround to avoid debris * fix debris on display * keyboard backlight * enable screen options * fsm based bounce-free rotary encoder implementation * use fsm RotaryEncoder only for T-Lora Pager * change inputbroker default config to allow using rotary wheel for screens AND menues --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-26 09:35:25 -05:00
Ben Meadors	24204feb71	Merge pull request #7747 from m1nl/esp32-pm-capabability-flags ... Setup ESP32 PM-specific capability flags	2025-08-25 19:29:25 -05:00
Ben Meadors	4ace2638e1	Merge pull request #7718 from notmasteryet/err7info ... Log more information about ignored packet	2025-08-25 14:29:24 -05:00
m1nl	ba26d03b1b	standarize values of HAS_32768HZ capability flag	2025-08-25 19:44:13 +02:00
m1nl	9a1c2c9b61	setup flags which describe framework / device PM capabilties	2025-08-25 19:42:13 +02:00
Ben Meadors	f2ba7d7851	Merge pull request #7744 from meshtastic/master ... Backmerge to develop	2025-08-25 06:58:05 -05:00
Tom Fifield	1eafdfcbc8	Reduce power of EU433 to 10dBm (#7733) ... We are currently blocked from making the breaking change to fix EU_433 channel centres until 3.0 (https://github.com/meshtastic/firmware/issues/3371 ) However, as already updated in https://github.com/meshtastic/meshtastic/pull/919 the documentation, the power limit for EU_433 is 10dBm. We can change the power limit without breaking anything, so this patch sets the power limit to match the ETSI spec without changing any other settings.	2025-08-24 14:45:29 -05:00
Jonathan Bennett	915f882e1f	Pkc fix (#7722)	2025-08-24 10:13:18 -05:00
Lewis He	5136c8ba24	The T-Deck-Pro 4G version sets the modem to be disabled by default. (#7715) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-23 06:46:59 -05:00
Ben Meadors	8b42bf7a95	Don't reboot when setting lora config with portduino sim radio (#7716)	2025-08-23 05:47:51 -05:00
notmasteryet	1c329d9ffa	Log more information about ignored packet	2025-08-22 08:46:14 -05:00
Ben Meadors	093a37a2b0	On screen keyboard (#7705) ... * Add on-screen keyboard implementation on Trackball device. * Update On-Screen Keyboard to new layout. * The on-screen keyboard dynamically adjusts the key size based on the screen. * Improve input box display on small screens. * Optimize the virtual keyboard layout and cursor movement logic, and adjust the keyboard starting position for small and wide screens. * Optimize the text alignment of numeric keys on ssd1306. --------- Co-authored-by: whywilson <m.tools@qq.com>	2025-08-21 06:31:27 -05:00
Ben Meadors	1daf5aad1f	Revert "Add on-screen keyboard implementation on Trackball device. (#7625)" (#7704) ... This reverts commit fe3f14a63e.	2025-08-21 06:29:23 -05:00
Wilson	fe3f14a63e	Add on-screen keyboard implementation on Trackball device. (#7625) ... * Add on-screen keyboard implementation on Wio Tracker L1. * Update On-Screen Keyboard to new layout. * The on-screen keyboard dynamically adjusts the key size based on the screen. * Improve input box display on small screens. * Optimize the virtual keyboard layout and cursor movement logic, and adjust the keyboard starting position for small and wide screens. * Optimize the text alignment of numeric keys on ssd1306. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-21 18:01:31 +08:00
Jonathan Bennett	ce75bf4496	Initial stab at rak6421 autoconf (#7691) ... * Initial stab at rak6421 autoconf * trunk * Add crc check to eeprom autoconf * Trunk again	2025-08-20 14:18:20 -05:00
Jonathan Bennett	5ce47045e7	Add SDL option to BaseUI on Native (#7568) ... * Add SDL option to BaseUI on Native * Update to latest LovyanGFX PR and use LGFX_SDL define * Move SDL backend to native-sdl target	2025-08-20 12:51:14 -05:00
github-actions[bot]	890357d579	Update protobufs (#7693) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-08-20 05:53:20 -05:00
Ben Meadors	c19f573b49	Fix TLS port bug on default mqtt validation	2025-08-19 20:10:47 -05:00
Jonathan Bennett	5de61b1a3d	Only gate PKC behind the simradio CLI flag (#7681) ... * Only gate PKC behind the simradio CLI flag * Hide router.cpp simradio check behind #if ARCH_PORTDUINO	2025-08-19 14:15:05 -05:00
jake-b	e55084629a	Move heartbeat response before !available guard. (#7672) ... * Move heartbeat response before !available guard. * fix formatting. --------- Co-authored-by: Jake-B <jake-b@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-19 08:10:53 -05:00
github-actions[bot]	f65e2c639e	Update protobufs (#7679) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-08-19 05:35:25 -05:00
Jonathan Bennett	95200e8f6b	Adds rfswitch on Portduino (#7663) ... * Initial attempt to get rfswitch working on Portduino * Make portduino_config global	2025-08-18 16:33:52 -05:00
Manuel	78c5309e9a	apply 180 degree hw roration Indicator BaseUI (#7660)	2025-08-17 14:48:24 -05:00
Thomas Göttgens	9feb1d378e	Support for T-Echo Lite, credits to @Szetya for doing all the heavy lifting! (#7636) ... * Support for T-Echo Lite, credts to @Szetya for doing all the heavy lifting! * move define to ini file	2025-08-17 13:37:12 +02:00
Jonathan Bennett	e5e8683cdb	Don't update the NodeDB if the nodeinfo has a mismatching public key (#7652)	2025-08-17 05:56:06 -05:00
Jonathan Bennett	d538ad170c	Add onboard message for devices with screens (#7655) ... * Add onboard message for devices with screens * Add message for TFT	2025-08-17 05:55:00 -05:00
Jonathan Bennett	c64c196778	Wait for lead up before enable longlong action (#7648)	2025-08-16 06:10:44 -05:00
github-actions[bot]	0046d957f1	Update protobufs (#7647) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-08-15 21:42:51 +02:00
Jonathan Bennett	4a241deb96	Thinknode button and backlight fixes (#7641) ... * Thinknode button and backlight fixes * Save backlight value between reboots	2025-08-15 14:41:21 -05:00
GUVWAF	8d5ae1d5d2	Fix marking LoRa transport mechanism (#7634)	2025-08-15 19:09:25 +02:00
Ben Meadors	e1e89a5e62	Don't include OLED fonts for international character sets by default (#7639)	2025-08-15 09:03:21 -05:00
Ben Meadors	a7be93449e	Spacing	2025-08-15 09:00:09 -05:00
Ben Meadors	c8694f9f2d	Fix Tracerouter warnings (#7637) ... * Static cast to avoid signed comparison * Another one	2025-08-15 07:03:14 -05:00
Ford Jones	1877a2c531	Prompt user to select destination upon launch of canned message module (#7624) ... Co-authored-by: Jason P <applewiz@mac.com>	2025-08-15 05:31:11 -05:00
Jonathan Bennett	ddd149945a	More spoof remediation (#7612) ... * More spoof remediation * Fix signed comparison error * Only fire self-bound messages into the routing module * Update src/mesh/MeshModule.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * String const --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-08-12 16:08:03 -05:00
Constantine	e3dd8164a4	nRF52840 promicro deepsleep fix with some additions (#7407) ... * Pro-Micro DeepSleep Quick Fix It is noticed that some nRF52840 boards (pro-micro in particular) stopped waking up from the deep sleep state (shutdown state) with a press of a button. The problem is in a Serial1.end() call. * Clear GPREGRET before setting There are some troubles with that register: it is recommended to clear it with 0xFF mask and only after that perform a setting. * Pro-Micro button SENSE signal Added SENSE signal on the user button. It is explicitly enabled now for this platform. * nRF52 pre-sleep main serial check Added another usage check for the main Serial. It could save some nerves in case the port is not in use by any means. Applied trunk fmt to the file. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-12 11:23:34 -05:00
Max	9b8149f14e	Adding medium and large RU fonts. Fixing RU string width calculation (#7498) ... * Adding medium and large RU fonts. Fixing string width calculation for RU font * Update src/graphics/draw/MessageRenderer.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-08-12 07:22:37 -05:00
Jonathan Bennett	e26de85b5f	Mark meshPackets based on which interface received. (#7589)	2025-08-11 21:47:04 -05:00
Ben Meadors	db238ef524	Log when this happened	2025-08-11 19:49:35 -05:00
Jonathan Bennett	f2b935f48f	Stop the bleeding with malicious NodeDB overwrites (#7596)	2025-08-11 15:52:28 -05:00
Thomas Göttgens	e69da71d4e	reorder for correct recognition (#7604)	2025-08-11 11:53:01 +02:00
Ben Meadors	f6857f1bcb	Heartbeat has a nonce now	2025-08-09 10:17:08 -05:00
github-actions[bot]	7fe2c74139	Update protobufs (#7588) ... Co-authored-by: jp-bennett <5630967+jp-bennett@users.noreply.github.com>	2025-08-09 09:14:22 -05:00
github-actions[bot]	be60f9612e	Update protobufs (#7587) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-08-09 08:14:04 -05:00
Ben Meadors	c1f4f79d4a	Revert "128row display (#7511)" ... This reverts commit d1f3c3c982.	2025-08-09 06:11:56 -05:00
Jonathan Bennett	8568b56ac6	Fix a crash on Native reboot (#7570)	2025-08-07 12:28:01 -05:00
Jonathan Bennett	691327b2db	Initial support for the ThinkNode M5 (#7502) ... * Initial support for the ThinkNode M5 * Update variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini Co-authored-by: Austin <vidplace7@gmail.com> * Cleanup variant.h for Elecrow Thinknode M5 * Properly detect battery voltage * Turn backlight off when screen sleeps --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Austin <vidplace7@gmail.com>	2025-08-07 06:28:15 -05:00
oscgonfer	a23c58c10a	Avoid acquiring lock twice (#7555) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-06 06:38:36 -05:00
Jonathan Bennett	27c6b24e3a	Rather than mysteriously rebooting, regenerate the keys and infrom the user. (#7558)	2025-08-05 19:53:25 -05:00
mrab	384436e937	fix: ina226 was not calibrated during init (#7547) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-05 06:34:52 -05:00
Jason P	eb30aae486	Create better log message for users (#7548)	2025-08-04 16:32:27 -05:00
Jason P	079286da04	Only toggle screen wake, don't break banners (#7545) ... * Only toggle screen wake, don't break banners * Fix code - only needed a small line change	2025-08-04 19:33:45 +02:00
tg-mw	0130899b3b	Fix Melopero RV3028 RTC Settings (#7524)	2025-08-04 18:42:39 +02:00
Thomas Göttgens	d1f3c3c982	128row display (#7511) ... * Fix 128 row monochrome display * trunk fmt * fix assignment	2025-08-04 17:25:31 +02:00
Jacob Powers	3b6eefa8bb	feat: event mode - limit smart position updates to at most every 5m (#7505) ... * feat: event mode - limit smart position updates to at most every 5m * fix: convert 600 to 600000ms for 5min threshold * fix: correct 5min threshold to 300000ms --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-07-31 21:45:34 -05:00
HarukiToreda	5107531425	Remember destination fix (#7427) ... * T-watch screen misalignment fix * Trunk fix * Rember Last Receipient Node or channel When a new freetext or preset message is sent and a destination is selected, the next message would forget the previously selected destination and would need to be selected again. With this fix it will remember the last destination selected until changed again. * Fix for reply function to remember last messaged * trunk check --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Jason P <applewiz@mac.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-07-31 07:36:03 -05:00
Ben Meadors	88655ffc44	Move BLE toggle menu option and add confirmation for canned messages in L1 (#7516) ... * Move bluetooth to system menu and add confirmation for canned messages * Cruft * Handle else * Warn * Fixed screen reset	2025-07-31 07:34:41 -05:00
Tom Fifield	bdedd0e1fe	Airoha GPS - ignore estimated fixes (#7429) ... TinyGPS Fix Quality has this information: 0 - fix not available, 1 - GPS fix, 2 - Differential GPS fix (values above 2 are 2.3 features) 3 = PPS fix 4 = Real Time Kinematic 5 = Float RTK 6 = estimated (dead reckoning) 7 = Manual input mode 8 = Simulation mode the previous Airoha code would allow quality >0 , which includes estimated positions. These wouldn't be passed through to the mesh due to other checks, but would affect the Airoha GPS_FIX_HOLD_TIME calculations. Changes the calculation to 1 >= quality <=5 .	2025-07-31 12:21:10 +10:00
Tom Fifield	4c901033b2	Workaround Webserver needing to stay up while Wifi is turned off (#7484) ... Expertly triaged by @philon- , turning off wifi using the HTTP API did not work. That was because we only served the HTTP API if Wifi was deemed to be available, but mid-way through turning it off Wifi was still available, but the configuration we were checking said it wasn't. This patch introduces an additional way the system can determine if Wifi is available, by referring to the WiFi.status(). This means that in that limbo state where Wifi has been set to be turned off, but the configuration has not been saved and it is still up, the HTTP API will stay up long enough to save the configuration. Fixes https://github.com/meshtastic/firmware/issues/6965	2025-07-30 07:47:00 -05:00
Ben Meadors	7d926da98c	Heartbeat response (#7506) ... * Heartbeat response * Move it * Add debug log for visibility	2025-07-30 07:40:27 -05:00
github-actions[bot]	1b793d1f23	Update protobufs (#7508) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-07-30 06:29:03 -05:00
Chloe Bethel	b5a8e8f51b	DEBUG_MUTE correctness (#7492) ... * treewide: make 'ifdef DEBUG_PORT' guards also take into account DEBUG_MUTE * stm32wl: Add a guard against having debug prints turned on without PIO_FRAMEWORK_ARDUINO_NANOLIB_FLOAT_PRINTF defined --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-07-29 08:51:38 +10:00
Ben Meadors	cc5d00e211	Core portnums rebroadcast mode whitelist instead of blacklist (#7487)	2025-07-28 12:37:37 -05:00
Ben Meadors	1a8ab2aadc	NodeDB count on MyNodeInfo for client progress reporting (#7489)	2025-07-28 12:23:59 -05:00
rradillen	1d8638b47d	[7353] Add all telemetry fields to json output (#7363) ... * Serializer bugfix * Remove duplicate test * fix tests * fix float precision issues --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-07-28 09:23:04 -05:00
Ben Meadors	3ecff48722	Set firmware edition (for events) from userprefs (#7488) ... * Set firmware edition (for events) from userprefs * Spaces in the right places	2025-07-28 07:31:33 -05:00
mikecarper	aa3b14ce72	bugfix Add rssi and snr to the store and forward code. (#7462) ... * Update StoreForwardModule.cpp * Update StoreForwardModule.h --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-07-27 20:03:01 -05:00
Ben Meadors	28aeb0f09e	Validate Serial config console override modes (#7470) ... * Validate serial config console override modes * Update src/modules/SerialModule.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Disable * Guard serial module * Guards --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-07-26 19:55:54 -05:00
github-actions[bot]	7c5e2c5393	Update protobufs (#7473) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-07-26 16:21:49 -05:00
Tom Fifield	df8b629c2c	Clear position on GPS deactivation, unless using fixed position (#7464) ... * Clear position on GPS deactivation, unless using fixed position As reported by @dreimal8 , and confirmed by @tuxmobil , when using and then subsequently disabling GPS the last position retrieved from the GPS was stored and continued to be broadcast. This change introduces a check to see if we are transitioning from GPS Enabled to GPS Disabled or Not Present. If we are, and fixed position is not in use, then we clear the local position. This will prevent inaccurate and undesired position broadcasts for those who disable their GPS. Fixes https://github.com/meshtastic/firmware/issues/7228 * Update triple click to also clear position --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-07-26 08:09:26 -05:00