6115 Commits

Author	SHA1	Message	Date
Jason P	65dcd8254e	Missed a comma in merge conflicts	2025-10-12 08:28:45 -05:00
Jason P	f9e31558d1	Merge branch 'develop' into multi-message-Storage	2025-10-12 08:27:32 -05:00
l0g-lab	7537d28419	Nodelist: choice of long or short name (#7926) ... * update to use long names for pager * remove duplicate * add menu item * fix after conflict * menu name change. use sanitizeString * fix formatting issue. should pass trunk now. * remove auto-generated protobufs * remove log, add tdeck, improvements. --------- Co-authored-by: l0g-lab <l0g-lab@users.noreply.github.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-12 08:25:15 -05:00
Jason P	6dfaf23baf	Update channel mute for adjusted protobuf	2025-10-12 08:04:01 -05:00
Jason P	544331d367	Merge branch 'develop' into multi-message-Storage	2025-10-12 07:49:53 -05:00
Ben Meadors	5d71776527	Merge pull request #8317 from meshtastic/master ... Master backmerge	2025-10-12 07:41:04 -05:00
Ben Meadors	661e596dbb	Fix muted channel compile errors after protobuf move (#8316)	2025-10-12 07:39:23 -05:00
Ben Meadors	a6732682de	Opt in to telemetry going forward (#8059)	2025-10-12 06:30:17 -05:00
Jason P	f0126d44e2	More BaseUI Frame Visibility Toggles (#8252) ... * Add Power and Environmental Telemetry Hide/Show * Allow Power and Telemetry Frames even if module disabled --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-12 06:28:23 -05:00
Clive Blackledge	fb08e17c39	Increase bluetooth 5.0 PHY speed and MTU on esp32_s3 (#8261) ... * Increase Bluetooth speed to 2MB, increase MTU * Adding esp32c6 * trunk fmt..	2025-10-12 05:35:00 -05:00
Tom Fifield	11aff46af1	Remove T1000E GPS startup delay sequence (#8236) ... 8 months ago, when this was added to the code, the GPS probe code was still a little flaky. Particularly after #6114 and #6116 were added, reliability improved for all devices as we were sending fewer calls on the bus. Today, the T1000E is the only Meshtastic device that regularly takes 2, 3, or 4 attempts to be detected via the probe code. Removing these lines, on my T1000E, results in the AG3335 being detected immediately. Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>	2025-10-12 05:34:34 -05:00
github-actions[bot]	cb11e6b720	Update protobufs (#8305) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-10-12 05:34:00 -05:00
Jason P	5e5a449226	Merge branch 'develop' into multi-message-Storage	2025-10-11 16:10:25 -05:00
Jonathan Bennett	8bf32dc042	Attach an interrupt to EXT_PWR_DETECT if present, and force a screen redraw on a power change.	2025-10-11 11:31:42 -05:00
Ben Meadors	73cadce581	Fix BLE stateful issues (#8287)	2025-10-11 11:31:42 -05:00
Tom Fifield	30d6962e79	Fix Station G2 Lora Power Settings (#8273) ... * Force coverage tests to run in simulation mode * Revert "Force coverage tests to run in simulation mode" This reverts commit e4ec719e6f. * Fix Station G2 Lora Power Settings In #8107 we introduced the ability to specify gain values for non-linear power amplifiers. This patch adds appropriate values for the Station G2, based on the table at https://wiki.uniteng.com/en/meshtastic/station-g2#summary-for-lora-power-amplifier-conduction-test Fixes https://github.com/meshtastic/firmware/issues/7239 --------- Co-authored-by: Austin Lane <vidplace7@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-11 11:31:42 -05:00
Ben Meadors	f99747180e	NimBLE speedup (#8281) ... * Remove status polling code in NimBLE * Goober --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>	2025-10-11 11:31:42 -05:00
Andrew Yong	64bfe73c06	fix: Move #include "variant.h" to top of file (fixes #8276) (#8278) ... * Force coverage tests to run in simulation mode * Revert "Force coverage tests to run in simulation mode" This reverts commit e4ec719e6f. * fix: Move `#include "variant.h"` to top of file (fixes #8276) The original line being further down the file causes any #ifdef/defined() checks for definitions in variant.h to silently skip. This was noticed when `USE_GC1109_PA` in Heltec v4 and Heltec Wireless Tracker failed to correct program TX_GAIN_LORA, but will also affect any variant.h-dependent configurations in this file, if they would have been defined above where the `#include` previously was. --------- Co-authored-by: Austin Lane <vidplace7@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-11 11:31:42 -05:00
Austin	cafb007ec4	mDNS: Advertise pio_env (for OTA scripts) (#8298)	2025-10-11 10:30:47 -05:00
Jason P	9e9d2af7c8	Attempt to fix memory usage of invalidLifetime	2025-10-11 09:19:48 -05:00
Jason P	e934f8f0b3	Use text aligns for message layout where necessary	2025-10-11 08:56:26 -05:00
Jason P	1d7fe20520	More C6L fixes and clean up header lines	2025-10-10 14:54:41 -05:00
HarukiToreda	abeeb12d96	preset aware signal strength display	2025-10-10 15:14:28 -04:00
HarukiToreda	97578fb9c0	Fix to many warnings related to BaseUI	2025-10-10 13:46:40 -04:00
Jason P	e606d88297	Remove duplicate code, fix more Chats, and fix C6L MessageRenderer	2025-10-10 11:02:16 -05:00
HarukiToreda	163d8e0540	fix for notification renderer	2025-10-10 11:25:09 -04:00
HarukiToreda	784e71f2fa	Signal bars for message ack	2025-10-10 10:50:15 -04:00
Jason P	84cef67b82	Fix builds for HELTEC_MESH_SOLAR	2025-10-10 09:34:43 -05:00
Jason P	6d899c9fd9	Clean up how muting works along with when we wake the screen	2025-10-10 08:58:27 -05:00
HarukiToreda	6069dc2ad8	trunk fix	2025-10-10 00:18:36 -04:00
HarukiToreda	e6093533ab	Mute channel fix	2025-10-09 20:25:48 -04:00
Jonathan Bennett	e5a2ce54e7	Attach an interrupt to EXT_PWR_DETECT if present, and force a screen redraw on a power change.	2025-10-09 19:07:20 -05:00
Jason P	334089aa97	Consolidate wording on "Chats"	2025-10-09 18:30:01 -05:00
Jason P	e93b65706b	Reorder Favorite Action Menu with simple word modifications	2025-10-09 17:35:34 -05:00
HarukiToreda	7970a32074	Go to thread from favorite screen	2025-10-09 18:19:59 -04:00
Ben Meadors	45f15b8fe6	Fix BLE stateful issues (#8287)	2025-10-09 12:44:00 -05:00
Tom Fifield	05edcc5d6c	Fix Station G2 Lora Power Settings (#8273) ... * Force coverage tests to run in simulation mode * Revert "Force coverage tests to run in simulation mode" This reverts commit e4ec719e6f. * Fix Station G2 Lora Power Settings In #8107 we introduced the ability to specify gain values for non-linear power amplifiers. This patch adds appropriate values for the Station G2, based on the table at https://wiki.uniteng.com/en/meshtastic/station-g2#summary-for-lora-power-amplifier-conduction-test Fixes https://github.com/meshtastic/firmware/issues/7239 --------- Co-authored-by: Austin Lane <vidplace7@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-08 16:03:26 -05:00
Ben Meadors	828e11cc48	NimBLE speedup (#8281) ... * Remove status polling code in NimBLE * Goober --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>	2025-10-08 14:16:57 -05:00
Andrew Yong	7822f28152	fix: Move #include "variant.h" to top of file (fixes #8276) (#8278) ... * Force coverage tests to run in simulation mode * Revert "Force coverage tests to run in simulation mode" This reverts commit e4ec719e6f. * fix: Move `#include "variant.h"` to top of file (fixes #8276) The original line being further down the file causes any #ifdef/defined() checks for definitions in variant.h to silently skip. This was noticed when `USE_GC1109_PA` in Heltec v4 and Heltec Wireless Tracker failed to correct program TX_GAIN_LORA, but will also affect any variant.h-dependent configurations in this file, if they would have been defined above where the `#include` previously was. --------- Co-authored-by: Austin Lane <vidplace7@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-08 11:33:50 -05:00
Ben Meadors	fcb1d64eb9	Bloop	2025-10-07 17:47:08 -05:00
Jason P	541e050e40	Reword menus to better reflect actions	2025-10-07 16:41:44 -05:00
Jason P	974b3e6133	Merge branch 'develop' into multi-message-Storage	2025-10-07 15:59:17 -05:00
Jason P	9e520d008b	Reorder menu options and reword Respond	2025-10-07 09:47:57 -05:00
Jason P	def5018c9d	Merge branch 'develop' into multi-message-Storage	2025-10-07 06:57:55 -05:00
Ben Meadors	9b7b8ffb21	Merge pull request #8247 from meshtastic/develop ... Develop to master	2025-10-07 06:26:28 -05:00
szlifier	f0e4ea7664	Add SHT4x serial number for detection (#8222) ... SHT4X chip recognized as SHT31, registerValue that stores first bytes of chip's serial number did not mach the chip. Added a serial number match for SHT40 found in a SONOFF SNZB-02P.	2025-10-07 06:25:38 -05:00
Tom Fifield	468b40e8db	Wait until after GPS lock hold before updating position, if we can. (#8064) ... * Wait until after GPS lock hold before updating position, if we can. After the recent patch, we hold lock for a bit before updating the position. The positions that come in after the hold are genuinely better positions than what we've been doing before. However, they only come 20 seconds after we've got lock. Previously, we would update the local position as soon as we got a lock as well as at the end of the hold, since a hold was not always possible. With this patch, if the settings allow, we should skip that first local position update. Fixes https://github.com/meshtastic/firmware/issues/8029 * Fix falling edge handling. * spelling Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Congeal lock handling * Add named constants * define unit to avoid confusion Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * ifdef, not if. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Add handling for when we first turn on. * Don't run if not active * Reset fixhold * Logic fixes * Add path for ACTIVE--> IDLE --> ACTIVE Previously we only covered HARDSLEEP --> ACTIVE. * Change hold time to gps_update_interval - 10s * Update comment * Add extra buffer to avoid re-starting hold --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-07 06:24:09 -05:00
Ben Meadors	bd9076b740	Remove risky change	2025-10-07 06:14:35 -05:00
Chloe Bethel	81a5aeff74	Fix serial pins for Ebyte E77 MBL board (#8246) ... Also move RAK3172 and new EBYTE_E77_MBL define to variant.h, as this makes VSCode know about the defines properly... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-07 06:11:26 -05:00
Ben Meadors	f13e7c20ba	Merge branch 'master' into develop	2025-10-07 06:08:18 -05:00
Tom Fifield	5bcc47dddb	Revert "develop --> Master" (#8244)	2025-10-07 06:00:09 -05:00
Jonathan Bennett	668cc9fd64	Do slightly better at threading the search for GPS hardware (#8240) ... * Do slightly better at threading the search for GPS hardware * Formatting and minor logic fix * Remove now-spam GPS Log messages --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-07 05:58:39 -05:00
Tom Fifield	8023f475ee	Merge branch 'develop' into master	2025-10-07 16:40:44 +11:00
Jonathan Bennett	b696e083f3	Log antispam (#8241) ... * less power spam * Don't warn about the first 4 GPS checksum failures	2025-10-07 16:37:04 +11:00
Jason P	d5ce4696f3	Provide some extra spacing for low hanging characters in messages	2025-10-06 17:42:03 -05:00
Jonathan Bennett	993e874eec	Don't error out with unset MAC address in unit tests	2025-10-06 12:31:29 -05:00
HarukiToreda	9f62007d94	Merge branch 'multi-message-Storage' of https://github.com/meshtastic/firmware into multi-message-Storage	2025-10-06 12:29:46 -04:00
HarukiToreda	67c0000f87	Build fail fix	2025-10-06 12:29:43 -04:00
Jason P	e7cdc7cc29	Merge branch 'develop' into multi-message-Storage	2025-10-06 08:47:34 -05:00
Ben Meadors	627c0145e7	Centralize getNodeId and fix references to owner.id (#8230)	2025-10-06 07:56:27 -05:00
Dmitry Dubinin	29f4d99bf6	Add Adaptive Polling Intervals to WebServer (#7864) ... * feat: add adaptive polling intervals to WebServer Replace fixed 5ms polling with adaptive intervals based on HTTP activity: - 50ms during active periods (first 5 seconds after request) - 200ms during medium activity (5-30 seconds) - 1000ms during idle periods (30+ seconds) Reduces CPU usage significantly during idle periods while maintaining responsiveness when handling HTTP requests. * Fix integer overflow and magic numbers in WebServer - Handle millis() overflow in getAdaptiveInterval() - Replace magic numbers with named constants - Improve code readability and maintainability	2025-10-06 05:52:40 -05:00
HarukiToreda	b549786bbb	revert	2025-10-06 01:05:12 -04:00
HarukiToreda	103f73e7c9	gating for message storage when not using a screen	2025-10-06 00:49:06 -04:00
HarukiToreda	383d95ade1	Eink autoscroll dissabled	2025-10-06 00:48:17 -04:00
Jason P	9b57b21ab4	Merge branch 'develop' into multi-message-Storage	2025-10-05 22:48:51 -05:00
Jason P	0b96486e7e	Fix outbound labels based to avoid creating delays	2025-10-05 22:38:31 -05:00
HarukiToreda	b8d33a3280	crash fix for confirmation nodes	2025-10-05 23:34:17 -04:00
Jason P	c9314c78ca	Better to say "in" vs "on"	2025-10-05 15:39:55 -05:00
Jason P	bbec5177ba	Add context for incoming messages	2025-10-05 15:33:53 -05:00
Jason P	8860f6195f	Continue unifying display, also show message status on the "isMine" lines	2025-10-05 15:01:22 -05:00
Jason P	bebb1e9e8d	Change DM to @ in order to unify on a single method	2025-10-05 14:33:30 -05:00
Jason P	13eb53fcf6	Lengthen channel name and finalize cleanup removal of Broadcast	2025-10-05 14:19:46 -05:00
Jason P	4e840943c6	Sanity checks are okay sometimes	2025-10-05 13:54:31 -05:00
GUVWAF	5c2997ef53	Print only one byte	2025-10-05 17:03:52 +02:00
GUVWAF	c147ce9a85	Update next-hops based on traceroute result	2025-10-05 16:58:42 +02:00
Ben Meadors	27f316b931	Merge pull request #8216 from GUVWAF/reprocessPacket ... Reprocess repeated packets and deduplicate logic	2025-10-05 08:58:13 -05:00
GUVWAF	f7cf5e6b0a	Change to "rebroadcast"	2025-10-05 15:56:45 +02:00
GUVWAF	7c373b76c4	Reprocess repeated packets also	2025-10-05 14:04:35 +02:00
GUVWAF	de6a02756d	De-duplicate handling upgraded packet and rebroadcasting logic	2025-10-05 14:03:55 +02:00
Jonathan Bennett	7c4367cddc	Cppckeck suppress bogus error	2025-10-04 16:54:19 -05:00
Jonathan Bennett	6022b749ba	Don't forget to break!	2025-10-04 16:54:19 -05:00
Jonathan Bennett	cbd30f95f3	Portduino: Only short-circuit hardware support when forcing sim mode	2025-10-04 16:54:19 -05:00
Jonathan Bennett	9ded6a5215	Pull in panel_sdl directly and drop native-sdl target	2025-10-04 16:54:19 -05:00
GUVWAF	888692a373	Add dropped packet count to LocalStats (#8207) ... * Add dropped packet count to LocalStats In case the transmit queue was full * Trunked --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-04 08:13:58 -05:00
Ben Meadors	fe4fb085e6	Merge branch 'master' into develop	2025-10-04 06:43:54 -05:00
Ben Meadors	7c5e2bc95a	Clear out user.id except for sending to phone (#8202) ... * Null out user.id except for sending to phone * Fix * Update src/modules/NodeInfoModule.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Copilot garbage * This is unnecessary, because we don't stored user.id on userlite * Don't need this * Fix warning * Just alter the protobuf * Alter protobuf doesn't do anything with the altered data, so let's re-encode it * Check inputbroker before access --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-10-04 06:42:36 -05:00
github-actions[bot]	ed32650b9b	Update protobufs (#8206) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-10-04 05:52:04 -05:00
GUVWAF	e8296914a5	Calculate airtime of transmitted and received packets separately (#8205)	2025-10-04 05:29:25 -05:00
Austin	b7f6a2acb6	ESP32s2 doesn't implement HWCDC (#8199)	2025-10-03 18:52:51 -05:00
Austin Lane	f72a4c50bd	Don't use IS_ONE_OF when loading Modules	2025-10-03 17:14:00 -04:00
Ben Meadors	775595cb37	Merge pull request #8160 from Quency-D/dev-heltec-tracker-v2 ... add heltec tracker v2 board.	2025-10-03 08:21:15 -05:00
Ben Meadors	560eb2c455	Merge branch 'develop' into 8139-root-topic	2025-10-03 06:37:36 -05:00
Ben Meadors	1be3820152	Merge pull request #8192 from meshtastic/master ... Master backmerge	2025-10-03 06:35:03 -05:00
github-actions[bot]	03baad2c11	Update protobufs (#8191) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-10-03 06:33:53 -05:00
Jonathan Bennett	0ddaf710e4	Add FACTORY_INSTALL option to do a filesystem reset on first boot (#8185) ... * Add FACTORY_INSTALL option to do a filesystem reset on first boot * Check for valid file handle before using Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-10-03 06:33:37 -05:00
ford-jones	50cfe7c705	Pull latest protobufs	2025-10-03 15:49:50 +13:00
ford-jones	76c1d69560	Regen protos	2025-10-03 15:28:08 +13:00
ford-jones	17863e96e2	Merge branch 'develop' of https://github.com/meshtastic/firmware into 8139-root-topic	2025-10-03 15:21:47 +13:00
Ben Meadors	e954591ca5	Merge branch 'develop' into fix/tlora-pager-rotary-amplifier	2025-10-02 14:40:37 -05:00
Jonathan Bennett	305f513834	Properly set Muzi Works R1 Neo HardwareModel	2025-10-02 10:40:32 -05:00