Fixed ESP32 ADC resolution bug introduced by #3184 as esp32 analog resolution is already set some line of code before to 12 bit default.
For our usage wouldn't be faster to use 10 bit? .
Built the LilyGo T-Echo bootloader from source to obtain the UF2 and zip package for updating the bootloader on the devices with outdated bootloaders. The UF2 will allow drag and drop flashing the update, and the zip package is in case adafruit-nrfutil is needed.
I wasn't sure the best location to put this but since we already have the nrf52 flash erase uf2 here, I figured this might be the best. I will be linking to these files in a docs article detailing the process for using them.
Use a mixture of full refresh, partial refresh, and skipped updates, balancing urgency and display health.
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* compiling w/o e-ink display
* pinout changes
* progress getting LoRa and LCD working
* fix for bootloader, gps pins
* add canary to build matrix
* merge with main
* fix build by excluding BellModem in RadioLib
* fixes for GPS
* Fix LED_BLUE and GPS RX/TX pins
* Variant changes for merge
* make GPS baud rate configurable
* fix debug config
* Canary v1.2 changes
* Fixes for GPS
* pass trunk check
* bump protobufs to master
* update build flags to use CANARYONE enum
* use canaryone throughout for consistency.
* #define 0 is still defined
* add back .vscode/extensions.json
* bump protobufs
* revert manual change to generated file
---------
Co-authored-by: Steven Osborn <steven@lolsborn.com>
E-ink panel is DEPG0213BNS800. Otherwise, identical to v1.1 (?)
Partial refresh supported, but not implemented in this commit.
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Fix getting channel name from MQTT topic
* Allow specifying channel index in JSON field "channel" for downlink
Still requires JSON message to be published to channel named "mqtt"
* Make non-breaking if someone adds another slash
* Portduino multiple logging levels
* Fixes based on GPSFan work
* Fix derped logic
* Correct size field for AID message
* Reformat to add comments, beginning of GPS rework
* Update PM2 message for Neo-6
* Correct ECO mode logic as ECO mode is only for Neo-6
* Cleanup ubx.h add a few more comments
* GPS rework, changes for M8 and stub for M10
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Fix: mark packet via MQTT as ACKed only after we sent it out via LoRa
* Don't need to check for broadcast, DMs also get implicit ACKs
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Portduino multiple logging levels
* Fixes based on GPSFan work
* Fix derped logic
* Correct size field for AID message
* Reformat to add comments, beginning of GPS rework
* Update PM2 message for Neo-6
* Correct ECO mode logic as ECO mode is only for Neo-6
* Cleanup ubx.h add a few more comments
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* feat(variants): Add support for TXCO on TLORA_V2_1_6 devices
* chore: remove long comment
* feat(variants): Add tlora-v2-1-1_6-tcxo to build matrix
* feat(variants): Use RADIOLIB_NC as DIO1 pin for tlora_v2_1_16 with TXCO
* Use generic naming scheme, add variant to build envs
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: code8buster <20384924+code8buster@users.noreply.github.com>
* Isolate esp32 adc logic gymnastics, try simplifying getBattVoltage
* Set sense resolution for pico platforms
* try silencing cppcheck when variant has no battery pin
* ADC channel for esp-idf calibration
* Missed an rp2040 device
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add debug options for RP2040
* Rename: "observed" should be plural: "observables"
* PhoneAPI: return failure on timeout
In `onNotify()`, when disconnected, PhoneAPI removed itself from the list of observers that was looped through in `notifyObservers()`. We should exit that loop in that case.
* Add Chatter 2 default_envs
* Add Chatter 2 to varients
* Add Chatter 2 specific code to esp32 platform code
* Parameterize TFT_INVERT for Chatter 2 and specify setRotation to 1
* Fix formatting to make Trunk happy
* Remove commented out #define USE_LCC68
* Fix formatting again
* Add chatter2 to the CI matrix
---------
Co-authored-by: code8buster <20384924+code8buster@users.noreply.github.com>
* fix: allow MQTT `encryption_enabled` with `json_enabled`
* fix: copy decoded MeshPacket and release memory after use
* fix: use `packetPool` allocCopy and release methods
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
