9962 Commits

This Branch

This Branch

All Branches

Author	SHA1	Message	Date
oscgonfer	c321312e10	Add one-shot mode config flag to SEN5X	2025-08-26 19:00:43 +02:00
oscgonfer	7d1deaf4ce	Add VOC measurements and persistence (WIP) ... * Adds VOC measurements and state * Still not working on VOC Index persistence * Should it stay in continuous mode?	2025-08-07 17:13:26 +02:00
oscgonfer	b3107fd0d5	Add placeholder for admin message	2025-08-07 16:27:41 +02:00
oscgonfer	b876b9a927	Bring back detection code for SEN5X after branch rebase	2025-08-06 10:47:50 +02:00
oscgonfer	c408d9ccf9	Implementation of cleaning in FS prefs and cleanup ... * Remove unnecessary LOGS * Add cleaning date storage in FS * Report non-cumulative PN	2025-08-06 10:44:37 +02:00
oscgonfer	561daa0cd0	Make AQTelemetry sensors non-exclusive	2025-08-06 10:43:28 +02:00
oscgonfer	76cffe8332	Add logic for sleep/wakeUp of PMS.	2025-08-06 10:43:28 +02:00
oscgonfer	21d21af51c	Settle on uint16_t for SEN5X PM data	2025-08-06 10:43:28 +02:00
oscgonfer	886866d5e8	Small TODO	2025-08-06 10:43:28 +02:00
oscgonfer	a374bb558c	Cleanup of logs and remove unnecessary delays	2025-08-06 10:43:28 +02:00
oscgonfer	e3f345c59b	Idle for SEN5X on communication error	2025-08-06 10:43:28 +02:00
oscgonfer	89e1532c79	Only disable SEN5X if enough time after reading.	2025-08-06 10:43:28 +02:00
oscgonfer	72d75449ac	Add dynamic measurement interval for SEN5X	2025-08-06 10:43:28 +02:00
oscgonfer	bab6fdd7e7	Small cleanups in SEN5X sensor	2025-08-06 10:43:28 +02:00
oscgonfer	3abd2a27ee	Enable PM sensor before sending telemetry. ... This enables the PM sensor for a predefined period to allow for warmup. Once telemetry is sent, the sensor shuts down again.	2025-08-06 10:43:28 +02:00
oscgonfer	f9de80272f	Remove dup code	2025-08-06 10:43:28 +02:00
oscgonfer	a7ea11b195	Minor change for SEN5X detection	2025-08-06 10:43:28 +02:00
oscgonfer	0e97e7d004	Small cleanup of SEN5X sensors	2025-08-06 10:43:28 +02:00
oscgonfer	c82e04244a	Changes on SEN5X library - removing pm_env as well	2025-08-06 10:43:28 +02:00
oscgonfer	aee86f62c5	WIP Sen5X functions	2025-08-06 10:42:11 +02:00
oscgonfer	9e82c8c4c5	Further (non-working) progress in SEN5X	2025-08-06 10:42:11 +02:00
oscgonfer	dc0ab1f178	WIP Sen5X functions	2025-08-06 10:42:11 +02:00
oscgonfer	3f9bf06aee	SEN5X first pass	2025-08-06 10:42:11 +02:00
oscgonfer	a129441533	Remove unused I2C speed functions and cleanup ... * Cleanup of SEN5X specific code added from switching branches * Remove SCAN_I2C_CLOCK_SPEED block as its not needed * Remove associated functions for setting I2C speed	2025-08-06 10:40:57 +02:00
Ben Meadors	b23605aba0	Merge branch 'master' into enhancement/air-quality-module	2025-08-05 15:54:53 -05:00
mrab	384436e937	fix: ina226 was not calibrated during init (#7547) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-05 06:34:52 -05:00
Jason P	eb30aae486	Create better log message for users (#7548)	2025-08-04 16:32:27 -05:00
Jason P	079286da04	Only toggle screen wake, don't break banners (#7545) ... * Only toggle screen wake, don't break banners * Fix code - only needed a small line change	2025-08-04 19:33:45 +02:00
tg-mw	0130899b3b	Fix Melopero RV3028 RTC Settings (#7524)	2025-08-04 18:42:39 +02:00
Thomas Göttgens	d1f3c3c982	128row display (#7511) ... * Fix 128 row monochrome display * trunk fmt * fix assignment	2025-08-04 17:25:31 +02:00
oscgonfer	f7a9e27228	Merge branch 'master' into enhancement/air-quality-module	2025-08-04 14:59:08 +02:00
Jacob Powers	3b6eefa8bb	feat: event mode - limit smart position updates to at most every 5m (#7505) ... * feat: event mode - limit smart position updates to at most every 5m * fix: convert 600 to 600000ms for 5min threshold * fix: correct 5min threshold to 300000ms --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-07-31 21:45:34 -05:00
HarukiToreda	5107531425	Remember destination fix (#7427) ... * T-watch screen misalignment fix * Trunk fix * Rember Last Receipient Node or channel When a new freetext or preset message is sent and a destination is selected, the next message would forget the previously selected destination and would need to be selected again. With this fix it will remember the last destination selected until changed again. * Fix for reply function to remember last messaged * trunk check --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Jason P <applewiz@mac.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-07-31 07:36:03 -05:00
Ben Meadors	88655ffc44	Move BLE toggle menu option and add confirmation for canned messages in L1 (#7516) ... * Move bluetooth to system menu and add confirmation for canned messages * Cruft * Handle else * Warn * Fixed screen reset	2025-07-31 07:34:41 -05:00
mikecarper	10bd10b9d1	bugfix Syntax error: "(" unexpected in device-update.sh (#7514) ... * Update device-update.sh to use /bin/bash * Update meshtasticd.postinst to use /bin/bash * Update meshtasticd.postrm to use /bin/bash	2025-07-31 06:02:09 -05:00
renovate[bot]	956a0f102b	Update platformio/ststm32 to v19.3.0 (#7512) ... Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2025-07-31 06:00:58 -05:00
Tom Fifield	bdedd0e1fe	Airoha GPS - ignore estimated fixes (#7429) ... TinyGPS Fix Quality has this information: 0 - fix not available, 1 - GPS fix, 2 - Differential GPS fix (values above 2 are 2.3 features) 3 = PPS fix 4 = Real Time Kinematic 5 = Float RTK 6 = estimated (dead reckoning) 7 = Manual input mode 8 = Simulation mode the previous Airoha code would allow quality >0 , which includes estimated positions. These wouldn't be passed through to the mesh due to other checks, but would affect the Airoha GPS_FIX_HOLD_TIME calculations. Changes the calculation to 1 >= quality <=5 .	2025-07-31 12:21:10 +10:00
Tom Fifield	4c901033b2	Workaround Webserver needing to stay up while Wifi is turned off (#7484) ... Expertly triaged by @philon- , turning off wifi using the HTTP API did not work. That was because we only served the HTTP API if Wifi was deemed to be available, but mid-way through turning it off Wifi was still available, but the configuration we were checking said it wasn't. This patch introduces an additional way the system can determine if Wifi is available, by referring to the WiFi.status(). This means that in that limbo state where Wifi has been set to be turned off, but the configuration has not been saved and it is still up, the HTTP API will stay up long enough to save the configuration. Fixes https://github.com/meshtastic/firmware/issues/6965	2025-07-30 07:47:00 -05:00
Ben Meadors	7d926da98c	Heartbeat response (#7506) ... * Heartbeat response * Move it * Add debug log for visibility	2025-07-30 07:40:27 -05:00
github-actions[bot]	1b793d1f23	Update protobufs (#7508) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-07-30 06:29:03 -05:00
Chloe Bethel	b5a8e8f51b	DEBUG_MUTE correctness (#7492) ... * treewide: make 'ifdef DEBUG_PORT' guards also take into account DEBUG_MUTE * stm32wl: Add a guard against having debug prints turned on without PIO_FRAMEWORK_ARDUINO_NANOLIB_FLOAT_PRINTF defined --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-07-29 08:51:38 +10:00
Ben Meadors	cc5d00e211	Core portnums rebroadcast mode whitelist instead of blacklist (#7487)	2025-07-28 12:37:37 -05:00
Ben Meadors	1a8ab2aadc	NodeDB count on MyNodeInfo for client progress reporting (#7489)	2025-07-28 12:23:59 -05:00
Thomas Göttgens	608fdc6f52	Santa may be checking his list twice, but we only need this in the platformio.ini (#7490)	2025-07-28 09:47:46 -05:00
rradillen	1d8638b47d	[7353] Add all telemetry fields to json output (#7363) ... * Serializer bugfix * Remove duplicate test * fix tests * fix float precision issues --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-07-28 09:23:04 -05:00
Ben Meadors	3ecff48722	Set firmware edition (for events) from userprefs (#7488) ... * Set firmware edition (for events) from userprefs * Spaces in the right places	2025-07-28 07:31:33 -05:00
mikecarper	aa3b14ce72	bugfix Add rssi and snr to the store and forward code. (#7462) ... * Update StoreForwardModule.cpp * Update StoreForwardModule.h --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-07-27 20:03:01 -05:00
Ben Meadors	28aeb0f09e	Validate Serial config console override modes (#7470) ... * Validate serial config console override modes * Update src/modules/SerialModule.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Disable * Guard serial module * Guards --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-07-26 19:55:54 -05:00
github-actions[bot]	7c5e2c5393	Update protobufs (#7473) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-07-26 16:21:49 -05:00
Tom Fifield	df8b629c2c	Clear position on GPS deactivation, unless using fixed position (#7464) ... * Clear position on GPS deactivation, unless using fixed position As reported by @dreimal8 , and confirmed by @tuxmobil , when using and then subsequently disabling GPS the last position retrieved from the GPS was stored and continued to be broadcast. This change introduces a check to see if we are transitioning from GPS Enabled to GPS Disabled or Not Present. If we are, and fixed position is not in use, then we clear the local position. This will prevent inaccurate and undesired position broadcasts for those who disable their GPS. Fixes https://github.com/meshtastic/firmware/issues/7228 * Update triple click to also clear position --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-07-26 08:09:26 -05:00